HELP . . . Sulfur Odor!?! - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Recipes/Ingredients > HELP . . . Sulfur Odor!?!

Reply
 
Thread Tools
Old 03-22-2008, 02:49 AM   #1
evenstill
Recipes 
 
Apr 2007
Texas, USA
Posts: 30


I started a Belgian Specialty Ale this last Monday using the recipe below. Ive re-suspended the yeast a couple of times using a home made Lazy Susan table so as not to introduce any oxygen. Just this evening I seem to be getting some faint sulfur/egg odors. Is everything ok? Whats going on? Is there something I need to do in order to prevent a batch of swill or will everything be fine?

Thanks,
Evenstill

Belgian Honey White
Extract with Specialty Grains
Makes 5 Gallons

Ingredients:
lb Flaked Wheat
lb White Wheat Malt
lb Belgian Pilsner
6 lbs Liquid Wheat Extract
3 lbs Honey
1 oz Ahtanum Pellet Hops
oz crushed Coriander
oz Bitter Orange Peel
oz Shredded Fresh Ginger Root
oz Fresh Lemon Zest
4 oz Corn Sugar (priming sugar)
1 capsule of BrewVint Yeast Fuel (nutrient)
Yeast: White Labs, Belgian Wit Ale, WLP400

Directions:
Sanitize everything.

In a 16 20 quart stainless stockpot, bring 2 gallons of water to 155F and turn off heat.

Put the crushed grains ( lb Flaked Wheat, lb White Wheat Malt, lb Belgian Pilsner) in a grain bag and steep for 15 minutes, agitating the grain bag with a stainless spoon. Remove the grain bag and get all the water out of it then discard.

Return to heat until boiling then turn heat off once again and move the stockpot to a cool burner. Stir in the 6 lbs of Liquid Wheat Extract and 3 lbs of Honey until completely dissolved then heat the mixture until boiling.

Reduce heat to achieve a good roiling boil without it boiling over. Add oz of Ahtanum Hops and set a timer for 60 minutes.

Add the oz crushed Coriander, oz Bitter Orange Peel, oz Shredded Fresh Ginger Root, and oz Fresh Lemon Zest for the last 15 minutes of the boil.

Add the capsule of BrewVint Yeast Fuel for the last 10 minutes of the boil.

Add the last oz of Ahtanum Hops for the last 5 minutes of the boil.

Cool the wort to around 80F and pour it into a clean 6 gallon glass carboy for primary fermentation.

Add enough cool water to make 5 gallons.

Check the Original Gravity. It should be around 1.066.

Pitch your yeast (White Labs, Belgian Wit Ale, WLP400).

Aerate thoroughly.

Attach airlock and blow-off tube.

Primary fermentation should slow down after 5-7 days. At this point rack into a clean 5 gallon glass carboy for conditioning (secondary fermentation).

Conditioning should last around 5-7 days. Final gravity should be around 1.016. At this point rack into a clean 5 gallon glass carboy for priming and bottling.

Pour 1-2 cups of water into a small pot and bring to a boil. Stir in 4.5 oz of Corn Sugar until completely dissolved (approximately 1 minute) then remove from heat and let cool to 80F or cooler.

Pour the cooled sugar water into the bottling carboy and mix gently but thoroughly.

Bottle and age for 3-4 weeks.

Brew Log:
03/17/2008
4:00pm: Initial fermentation started.
Original Gravity: 1.0675
Sugar by weight: 16.46 Plato
I didnt have oz of lemon zest so I just used oz.

03/19/2008
10:00pm: I havent seen an excessive amount of foam so I removed the blow-off tube and re-suspended the sediment using a home made Lazy Susan table.

03/21/08
9:45am: I re-suspended the sediment using a home made Lazy Susan table. Fermentation is still quite vigorous with bubbles coming faster then 1 every second.
8:00pm: Im starting to detect a faint sulfur/egg odor.

 
Reply With Quote
Old 03-22-2008, 03:06 AM   #2
GilaMinumBeer
Half-fast Prattlarian
HBT_LIFETIMESUPPORTER.png
 
GilaMinumBeer's Avatar
Recipes 
 
Jan 2008
Posts: 59,205
Liked 7682 Times on 6275 Posts


Quote:
Originally Posted by evenstill
8:00pm: I’m starting to detect a faint sulfur/egg odor.
Give it more time . . . . It'll go away.

And for christ sake stop spinning your yeast, your making them dizzy! It's an Ale yeast, they are supposed to be on bottom. That's where they like to work. Trust me, there is plenty in suspension.

Go to the store, buy beer, sit down, drink craft and relax.

After 7 days take a sample (with something sanitized) and check the gravity. Write it down. In another day, do it again.

When it appears to have stopped, bump this thread if you aren't sure that it's terminal (finished).


 
Reply With Quote
Old 03-22-2008, 04:08 AM   #3
bradsul
Flyfisherman/brewer
HBT_LIFETIMESUPPORTER.png
 
bradsul's Avatar
Recipes 
 
Sep 2006
Ontario, Canada
Posts: 4,898
Liked 32 Times on 25 Posts


Belgian yeasts will often give some pretty funky smells during fermentation, it's just the way they are. And definitely leave the yeast alone! They can find the food, don't worry.
__________________
Brad
Canadian Brewers Unite!


Projects: Sylvania Kegerator Conversion, Tower Cooling, Grain Milling Station

 
Reply With Quote
Old 03-27-2008, 01:54 AM   #4
evenstill
Recipes 
 
Apr 2007
Texas, USA
Posts: 30

Thanks all. The odor disappeared after another day or two . . . but the fermentation is still quite active. Is this a problem?

Ive had it in primary for almost 10 days now and there is still 1-2 inches of foam at the top, not very much trub settling to the bottom, and the bubbles are still coming at a rate of 1 every 10-11 seconds.

Should I just leave it in primary until the foam goes away or the bubbles slow down? Would it be better if I go ahead and rack it at the two week mark anyway and if so, should I try to get some of the foam off the top into the secondary?

Thanks,
evenstill

 
Reply With Quote
Old 03-27-2008, 01:56 AM   #5
Judd
Recipes 
 
Nov 2007
Halifax, Canada
Posts: 279

Nothing to worry about. Some beers take longer to ferment out. Leave it in primary until it's done. Racking it to secondary wouldn't do you any good.
__________________
The Greenwall

 
Reply With Quote
Old 03-27-2008, 10:57 PM   #6
evenstill
Recipes 
 
Apr 2007
Texas, USA
Posts: 30

Will the krausen sink to the bottom when it's finished? What should I look for other then airlock activity (I'm leery about opening it constantly to check the gravity)?

 
Reply With Quote
Old 03-27-2008, 11:42 PM   #7
bradsul
Flyfisherman/brewer
HBT_LIFETIMESUPPORTER.png
 
bradsul's Avatar
Recipes 
 
Sep 2006
Ontario, Canada
Posts: 4,898
Liked 32 Times on 25 Posts


The krausen will drop when it's pretty much done, I wouldn't do anything with it (even gravity readings) until it does. You also don't need to take daily gravity readings, just check every few days and when it's stabilized (AND at least a week has passed) you can rack to secondary.
__________________
Brad
Canadian Brewers Unite!


Projects: Sylvania Kegerator Conversion, Tower Cooling, Grain Milling Station

 
Reply With Quote
Old 03-27-2008, 11:51 PM   #8
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,741
Liked 8017 Times on 5602 Posts


I know it's hard, but try to just walk away for at least another four days to a week. The beer isn't finished yet, but will eventually finish up. Don't worry about it- it'll be fine!
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 03-28-2008, 12:29 AM   #9
Poindexter
 
Poindexter's Avatar
Recipes 
 
Oct 2007
interior Alaska
Posts: 1,195
Liked 5 Times on 5 Posts


Just leave it.

The more threads you read here and the more links you follow from here, the longer you will leave your beer on the yeast in primary.

I am up to three weeks in primary on the yeast cake now, minimum, for any beer no matter what, and my brews are still getting better and better with every batch.

Secondary is for girly-man types. Long primary ferments let the yeast clean up after the big party.

 
Reply With Quote
Old 04-22-2008, 06:58 PM   #10
evenstill
Recipes 
 
Apr 2007
Texas, USA
Posts: 30

I racked it to secondary on Sunday 04-06-08 and the gravity was 1.0169. So its been in secondary for about 2 weeks and Im still seeing quite a few small bubbles rising within the carboy. Is this normal at this point? Should I:

A) Re-suspend the yeast using my lazy-susan turn table to speed up the conditioning process,

B) Go ahead and bottle it in another week or so even if theres still some activity within the carboy, or

C) Leave it alone until there are absolutely no signs of activity within the carboy then bottle?

Thanks,
evenstill

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sulfur after 4 weeks? thelorax121 Cider Forum 9 07-30-2009 04:14 AM
Now I know what you mean by sulfur! neuron555 General Techniques 1 08-04-2008 12:32 PM
Sulfur Smell in my DFH 60 gonzo brewer Recipes/Ingredients 1 02-04-2008 02:09 PM
Sulfur smell... Benny Blanco Recipes/Ingredients 3 01-27-2008 07:52 PM
sulfur smell = sulfur taste MikeRLynch Winemaking Forum 2 01-19-2007 12:31 AM


Forum Jump