Nitrogen Beers and line Length - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Nitrogen Beers and line Length

Thread Tools
Old 03-14-2008, 04:39 AM   #1
Sep 2007
Posts: 102
Liked 1 Times on 1 Posts


I read all of this at BYO on the 30 psi and using the stone.

What length of beer line should I use for a 30 psi beer gas mix?

Any other tips anyone can offer besides what was in the BYO posting?


Reply With Quote
Old 03-14-2008, 06:46 PM   #2
Mar 2007
Posts: 430
Liked 1 Times on 1 Posts

From what I've read around here the line length is not all that important on the gas side. Also, most people just carb their beer like normal to a low volume and then just hook up the beer gas when ready to serve and the stout faucet will take care of the rest.

Reply With Quote
Old 03-14-2008, 07:07 PM   #3
david_42's Avatar
Oct 2005
Oak Grove, Oregon, USA
Posts: 25,599
Liked 158 Times on 148 Posts

If you are using a stout faucet, the beer line length isn't important. The faucet's resistance plate (or control if you have a fancy one) provides everything you need.
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Keg Line Length? lpdean Bottling/Kegging 42 09-08-2010 04:21 AM
Nitro line length mkultra69 Bottling/Kegging 3 10-27-2009 02:40 PM
Co2 Line Length Boston813 Bottling/Kegging 9 10-23-2009 10:23 PM
Gas line length... DubbelDach Equipment/Sanitation 5 12-08-2008 03:32 AM
Beer line length highwayman Bottling/Kegging 3 07-29-2006 04:35 AM

Forum Jump