andrewmaixner
Well-Known Member
Here's a new one to me! I wouldn't have caught it had I not spilled a little beer in transferring. It was a no-so-perfect complication to a no-so-perfect night with a new batch of used kegs which I spent 4 hours cleaning and reconditioning, a using a new oxygen-free sterile-siphon method, etc.
If it can go wrong, or get more complicated, it will
The leak was manifesting between the base of the screw where one would affix the liquid disconnect, and the rubber around it. Took a little while to figure out that it wasn't a issue with the o-rings, or post, or dip tube.
See the video here:
https://goo.gl/photos/CnnARFG3PveJVkPW9
If it can go wrong, or get more complicated, it will
The leak was manifesting between the base of the screw where one would affix the liquid disconnect, and the rubber around it. Took a little while to figure out that it wasn't a issue with the o-rings, or post, or dip tube.
See the video here:
https://goo.gl/photos/CnnARFG3PveJVkPW9