Alcohol Content in Brew - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Alcohol Content in Brew

Reply
 
Thread Tools
Old 02-09-2006, 09:45 PM   #1
rcbrew
Recipes 
 
Feb 2006
Posts: 88


I have a question on the alcohol content in a particular recipe of homebrew. Can you raise or lower alcohol content of a recipe with technique or timing? What really affects the alcohol content in a recipe? I realize that a byproduct of fermentation is alcohol but how would you predetermine an alcohol content of a recipe?

 
Reply With Quote
Old 02-09-2006, 09:51 PM   #2
Truble
 
Truble's Avatar
Recipes 
 
Oct 2005
Boston, MA
Posts: 1,101
Liked 9 Times on 7 Posts


Here's how I understand it so far:

You can forecast the alcohol content by using the specific gravity reading, which is simply the measure of sugar in the wort. Using a hydrometer, you take readings once the wort is cooled. This is the Starting Gravity, or Original Gravity. There are also methods to forecast the potential sugar production of a given grain bill or extract quantity, Check out How to Brew at http://www.howtobrew.com/section1/chapter1.html) When fermentation is done, you can take another reading, for the finished gravity. Using some math (which escapes me since I have an excel doc at home that does it for me) you can compute the Alcohol by weight and volume, in approximation. The way to controler alcohol content is by the amount of Malt or fermentable sugar you add to your brew. With All grain methods, technique and experience play a big role in sugar extraction efficiency, and therefore, potential alcohol production. In extract brewing, not so much, since the malt extract is basically the product of a grain mashing.
__________________
Even the strongest blade of grass bends in the wind
--------------------------------------------

Primary: Octoberfest
mini 1G Primary: nichts
Secondary #1: #97 Pale Ale
Secondary #2 nichts
Bottled/Conditioning: nichts

Fully ConditionedDrinking: nichts
All Gone!:
Everything


 
Reply With Quote
Old 02-09-2006, 09:57 PM   #3
anthrobe
 
anthrobe's Avatar
Recipes 
 
Nov 2005
Phoenix, AZ
Posts: 578
Liked 1 Times on 1 Posts


Quote:
Originally Posted by rcbrew
I have a question on the alcohol content in a particular recipe of homebrew. Can you raise or lower alcohol content of a recipe with technique or timing? What really affects the alcohol content in a recipe? I realize that a byproduct of fermentation is alcohol but how would you predetermine an alcohol content of a recipe?
There are many software programs out there that you can use that will help you predetermine what your OG will be before you brew. Then depending on the yeast you use, the attenuation will be different. For instance, I am going to brew a beer that has a anticipated OG of 1.050. I am using a yeast with 80% attenuation. 80% of .050 is .040. My anticipated FG will be 1.010. Many here use a program called Promash. I have been using the recipator at http://hbd.org/recipator/.
__________________
On Deck -
Primary1 -Hop Knot 10/04/07
Primary2 -
Secondary1 -
Secondary2 -
On Tap
Tap1 - Kelly's Rasberry Cream Ale 7/11/07
Tap2 - Black Stap Porter (8/25/07)
Tap3 - Hefeweizen 7/05/07
Waiting for tap\Conditioning
Keg1 -
Keg2 -
Keg3 -
Bottles
-
-

---------------------------------------------------

 
Reply With Quote
Old 02-09-2006, 10:10 PM   #4
Blender
 
Blender's Avatar
Recipes 
 
Jan 2006
Santa Cruz, CA.
Posts: 3,106
Liked 8 Times on 5 Posts


I just got finished with an extract kit from Morebeer and on the note page that they provide it states that to calculate the Alcohol Content by Volume you take OG - FG * 131. Even I can remember this formula.
__________________
Gary

 
Reply With Quote
Old 02-10-2006, 08:15 PM   #5
rcbrew
Recipes 
 
Feb 2006
Posts: 88

Thanks for the info........now taking this a step further.........can you take an existing recipe and reduce the alcohol content and still come up with a decent tasting brew? I have a family member that is on medication that cannot handle alcohol but still enjoys the taste of a good brew?

 
Reply With Quote
Old 02-10-2006, 08:48 PM   #6
Walker
I use secondaries. :p
HBT_LIFETIMESUPPORTER.png
 
Walker's Avatar
Recipes 
 
Sep 2005
Cary, NC
Posts: 10,987
Liked 101 Times on 89 Posts


Quote:
Originally Posted by rcbrew
Thanks for the info........now taking this a step further.........can you take an existing recipe and reduce the alcohol content and still come up with a decent tasting brew? I have a family member that is on medication that cannot handle alcohol but still enjoys the taste of a good brew?
You can make non-alcholic beer at home (and by "non-alcoholic", I mean that it will contain less that 0.5% abv, just like most commercial non-alcoholic beers contain).

What you need to to is ferment the whole thing as normal. When it is done, you put it back into a kettle and heat it up to boiling. All of the alcohol will evaporate by doing this and you are left with 0% ABV beer.

Then, you make up your priming sugar solution and and put that (along with some fresh yeast) into the cooled non-alcoholic beer, stir it up, and bottle it.

The yeast will eat the priming sugar and carbonate the beer, and this should produce less than 0.5% ABV in the final product.

-walker
__________________
Ground Fault Brewing Co.

 
Reply With Quote
Old 02-10-2006, 09:22 PM   #7
oxford brewer
Recipes 
 
Jan 2006
oxford
Posts: 134

What would boiling the beer again possibly do to the taste?

 
Reply With Quote
Old 02-10-2006, 09:23 PM   #8
Walker
I use secondaries. :p
HBT_LIFETIMESUPPORTER.png
 
Walker's Avatar
Recipes 
 
Sep 2005
Cary, NC
Posts: 10,987
Liked 101 Times on 89 Posts


you don't actually need to boil it. just bring it up to the point of boiling. Alcohol boils at something like 180 degrees (I think) so as soon as the beer starts heating up over 180 degrees (or whatever it is) the alcohol will be long gone.

-walker
__________________
Ground Fault Brewing Co.

 
Reply With Quote
Old 02-10-2006, 09:26 PM   #9
loopmd
 
loopmd's Avatar
Recipes 
 
Jan 2005
Omaha, Nebraska
Posts: 657
Liked 4 Times on 3 Posts


Quote:
Originally Posted by Walker
you don't actually need to boil it. just bring it up to the point of boiling. Alcohol boils at something like 180 degrees (I think) so as soon as the beer starts heating up over 180 degrees (or whatever it is) the alcohol will be long gone.

-walker

And then you collect the part that evaporates and run it through a radiator and copper tubing.

 
Reply With Quote
Old 02-10-2006, 09:27 PM   #10
Walker
I use secondaries. :p
HBT_LIFETIMESUPPORTER.png
 
Walker's Avatar
Recipes 
 
Sep 2005
Cary, NC
Posts: 10,987
Liked 101 Times on 89 Posts


and you end up with about 20 oz of rocket fuel.

.. um... wait.. I think that's illegal.

-walker
__________________
Ground Fault Brewing Co.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Alcohol Content gruversm Beginners Beer Brewing Forum 9 04-23-2008 10:46 AM
Alcohol content Bartolo Beginners Beer Brewing Forum 7 02-17-2008 04:39 AM
my alcohol content is to low whitehole Beginners Beer Brewing Forum 16 02-15-2008 06:36 PM
Getting the alcohol content right crafalik Cider Forum 2 07-08-2006 04:12 PM
Alcohol Content? GABrewboy Cider Forum 4 01-29-2006 01:00 AM


Forum Jump