Beer Faucets and parts - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Beer Faucets and parts

Reply
 
Thread Tools
Old 03-10-2008, 04:45 PM   #1
srm775
Recipes 
 
Aug 2007
IL
Posts: 1,370
Liked 3 Times on 3 Posts



I'm getting ready to build the collar around my keezer and was wondering if anyone had a list of parts I'd need for the beer faucets. I.e. shanks, nipples etc. I would greatly appreciate it.

I'm planning on buying standard chrome faucets and making the collar out of 2"x6" boards.



 
Reply With Quote
Old 03-10-2008, 04:56 PM   #2
RockfordWhite
Recipes 
 
Dec 2007
Posts: 449
Liked 7 Times on 6 Posts


You'll need a shank (i just buy them with a nipple built in) and a faucet...you can buy them as a combo most places

I'm not trying to be a smart ass...but thats pretty much all you need...oh yeah and you'll need tubing



 
Reply With Quote
Old 03-10-2008, 05:48 PM   #3
srm775
Recipes 
 
Aug 2007
IL
Posts: 1,370
Liked 3 Times on 3 Posts


Quote:
Originally Posted by RockfordWhite
You'll need a shank (i just buy them with a nipple built in) and a faucet...you can buy them as a combo most places

I'm not trying to be a smart ass...but thats pretty much all you need...oh yeah and you'll need tubing
yeah, that's about what I thought but I wanted to make sure.

 
Reply With Quote
Old 03-10-2008, 07:07 PM   #4
srm775
Recipes 
 
Aug 2007
IL
Posts: 1,370
Liked 3 Times on 3 Posts


does anyone have any recommendations one which length of shanks I should purchase? Either 3" or 4"? I don't want the shank so short that it's difficult to work with my 2"x6" collar, but I don't want it any longer than it needs to be and getting in the way.

 
Reply With Quote
Old 03-10-2008, 07:16 PM   #5
WBC
 
WBC's Avatar
Recipes 
 
Jun 2007
La Puente, CA, California
Posts: 2,164
Liked 8 Times on 8 Posts


I do not use anything in my serving lines that is not stainless or food grade beer line. Shanks that are chrome plated are very nasty inside the bore as the plating does not go into a hole at all. The beer faucets have some of the same problems if the plating is not well done. Shanks with the nipple are "Chrome Plated" as a rule. It's you and your friends that will be drinking the beer that comes out of your faucets so be careful. Don't forget clamps for the beer line.

For every faucet you need a shank and nipple assy which includes the nipple, sealing washer and nut and a Corny beer out connector(Barb type).

5 to 6 feet of 3/16 beer line.

For the CO2:
5 feet of 1/4 or 5/16 CO2 line(depends on barb size).

Corny keg connector for CO2 in.

CO2 bottle (as big as you can afford).

CO2 regulator.


A tray to catch the beer overflow.
__________________
Cheers,
WBC

Fermentor 1: Bill's House Ale II, Fermentor 2: German Helles, Fermentor 3: Bill's Schworzbier (Black Bier)
Tap 1: Bill's House Ale II, Tap 2: German Hefewizen, Tap 3: Nut Brown Ale
Future Brews: Stone IPA Clone, Blonde Ale, Budvar Clone, Newcastle Clone
New toy: Blichmann 27 gallon fermentor


“If you find yourself in a hole, the first thing to do is stop digging”

“Good judgment comes from experience, and a lotta that comes from bad judgment”

 
Reply With Quote
Old 03-10-2008, 07:19 PM   #6
Professor Frink
 
Professor Frink's Avatar
Recipes 
 
Sep 2006
San Diego, CA
Posts: 3,085
Liked 19 Times on 16 Posts


If you're making your collar with 2x4 or 2x6's, then 3" shanks are plenty long.
__________________
Primary: Cherrywood Smoked Porter
60 Minute IPA
Secondary:
On tap:Amber Ale
Milk Stout

Lagering:


http://www.lazydogbrewery.com

 
Reply With Quote
Old 03-10-2008, 07:43 PM   #7
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,146
Liked 1622 Times on 1050 Posts


Keep in mind that the ones with the welded hose barb include the barb itself in that 3" spec. I used the 3" ones from superprod.com and my coller is only 3/4" thick. They would probably just make it through with a tiny bit of thread left for the nut.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 03-10-2008, 08:14 PM   #8
srm775
Recipes 
 
Aug 2007
IL
Posts: 1,370
Liked 3 Times on 3 Posts


Quote:
Originally Posted by Bobby_M
Keep in mind that the ones with the welded hose barb include the barb itself in that 3" spec. I used the 3" ones from superprod.com and my coller is only 3/4" thick. They would probably just make it through with a tiny bit of thread left for the nut.
So ... the 4" would be better? I ordered the 1/4" ID 4"length ones. Sound about right?

 
Reply With Quote
Old 03-10-2008, 08:30 PM   #9
Professor Frink
 
Professor Frink's Avatar
Recipes 
 
Sep 2006
San Diego, CA
Posts: 3,085
Liked 19 Times on 16 Posts


Quote:
Originally Posted by srm775
So ... the 4" would be better? I ordered the 1/4" ID 4"length ones. Sound about right?
That's fine. I have 2 that are 3" and 2 that are 4" - either is fine for one 2x6 thick (2x6's typically aren't 2 inches wide, they're usually closer to 1.5 inches).
__________________
Primary: Cherrywood Smoked Porter
60 Minute IPA
Secondary:
On tap:Amber Ale
Milk Stout

Lagering:


http://www.lazydogbrewery.com

 
Reply With Quote
Old 03-11-2008, 06:05 PM   #10
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,146
Liked 1622 Times on 1050 Posts


I think you'll be happy with the 4".


__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Whats the best way to clean beer faucets? trainfever Bottling/Kegging 2 11-13-2013 06:35 PM
Chest freezer collar is built, what parts do I need to get for faucets? solbergg Equipment/Sanitation 12 08-19-2009 09:54 AM
Free Faucets and beer/air hose wigstr General Beer Discussion 5 01-13-2009 09:39 PM
Beer gas/stout faucets Moonshae Equipment/Sanitation 3 01-09-2009 07:53 PM
German style beer faucets Kaiser Equipment/Sanitation 6 03-06-2007 04:54 AM


Forum Jump