connecting 3 CO2 regulators - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > connecting 3 CO2 regulators

Thread Tools
Old 03-07-2008, 06:46 PM   #1
Nov 2006
Bloomington, IN
Posts: 97

I'm thinking of building my own 3 regulator set-up so that I can run kegs at different pressures. This is what I think I need.

3 of these regulators:

with these gauges:

and these valves:

connected with these:

Is there anything I'm missing?

Reply With Quote
Old 03-07-2008, 06:54 PM   #2
olllllo's Avatar
Apr 2006
Phoenix, Arizona
Posts: 13,330
Liked 141 Times on 114 Posts

Make sure the thread direction matches. The back of the regulator body will show RHT or LHT markings for each of the female ports indicating the the direction.
Rabbit And Coyote Schwag
Rob - Phoenix Ambassador to Milwaukee
Where did your avatar go?
Ginger Beer for Moscow Mules Bacon Vodka

Reply With Quote
Old 03-07-2008, 06:55 PM   #3
Vendor and Brewer
Bobby_M's Avatar
Aug 2006
Whitehouse Station, NJ
Posts: 23,403
Liked 1813 Times on 1151 Posts

Yeah, you're good to go but I'd recommend 0-30psi gauges instead of 0-60 unless you're doing soda or water. Look how small the 0-20psi range is on there.
Welcome to I love you.
New Stirplates are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tips on connecting CFC hoses Croy9000 Equipment/Sanitation 10 09-21-2009 05:19 PM
Connecting co2 lines. What kind? pedalmedic Bottling/Kegging 2 12-22-2008 03:20 PM
Connecting corny kegs to a kegerator pwb2103 Bottling/Kegging 7 09-18-2008 02:46 PM
Connecting two regulators - how? jacksonbrown Bottling/Kegging 0 04-17-2008 07:46 PM

Forum Jump