Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Tower dimensions
Reply
 
Thread Tools
Old 03-06-2008, 10:50 PM   #1
Fingers
Feedback Score: 0 reviews
 
Fingers's Avatar
Recipes 
 
Join Date: Jan 2007
Location: Lac du Bonnet, Manitoba
Posts: 4,212
Liked 35 Times on 30 Posts

Default Tower dimensions

So I've decided to build my own tower to match the bar its going on. I have two taps right now and I'll eventually get up to six. The frame will be steel to support the stress of pulling on taps and it will be wrapped in wood to match the bar.

I need to pre-drill the steel for six taps but drill the outside wood for only two right now. I need to know how far apart is optimal for spacing the taps and how high they should be. Please post comments and advice based on your own experiences.

I know Brewpastor built a nice little unit so I'm hoping he'll pipe up and share his knowledge...


__________________
If you can't fix it with a hammer, you've got an electrical problem.
Fingers is offline
 
Reply With Quote
Old 03-07-2008, 03:31 AM   #2
McKBrew
Feedback Score: 0 reviews
 
McKBrew's Avatar
Recipes 
 
Join Date: Oct 2006
Location: Hayden, Idaho
Posts: 8,291
Liked 34 Times on 30 Posts
Likes Given: 8

Default

Bump....

Just to help out Fingers, because I don't know the answer to his question.

I'd imagine that a spacing of 3 inches would be about, and a height of at least 12", but if you have any wheat/pilsner glasses you might want them a bit higher.


__________________
Make Beer, Not War.
McKBrew is offline
 
Reply With Quote
Old 03-07-2008, 03:35 AM   #3
olllllo
[]-O-[]
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
olllllo's Avatar
Recipes 
 
Join Date: Apr 2006
Location: Phoenix, Arizona
Posts: 13,512
Liked 138 Times on 112 Posts
Likes Given: 13

Default

I just eyeballed it. You can place them surprisingly close together, but why would you? You might consider growler height.
__________________
Rabbit And Coyote Schwag
Rob - Phoenix Ambassador to Milwaukee
Where did your avatar go?
Ginger Beer for Moscow Mules Bacon Vodka
Twitter
olllllo is offline
 
Reply With Quote
Old 03-07-2008, 03:42 AM   #4
Fingers
Feedback Score: 0 reviews
 
Fingers's Avatar
Recipes 
 
Join Date: Jan 2007
Location: Lac du Bonnet, Manitoba
Posts: 4,212
Liked 35 Times on 30 Posts

Default

Quote:
Originally Posted by olllllo
I just eyeballed it. You can place them surprisingly close together, but why would you? You might consider growler height.
That's a very good point, olllllo. I hadn't thought about accomodating vessels larger than a Pilsner glass. I'm not as worried about how close together they are because you wouldn't normally pour two at once so I can just eyeball that one for esthetics. I guess I have my answer. Thanks, guys.
__________________
If you can't fix it with a hammer, you've got an electrical problem.
Fingers is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Converting a Single Tower to a Dual Tower?!? nunzio42 Kegerators and Keezers 5 09-12-2013 05:43 AM
Multi-tap tower out of regular tower? gonzoflick Equipment/Sanitation 16 06-20-2009 01:35 PM
Are these dimensions OK for a Mash tun? Endovelico Kettles, Mash Tuns, & Hot Liquor Tanks 5 05-23-2009 03:49 PM
carboy dimensions Dr. Fedwell Equipment/Sanitation 2 06-03-2008 11:53 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS