Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > First All-Grain attempt this weekend!
Reply
 
Thread Tools
Old 02-03-2006, 09:07 PM   #21
ian
Feedback Score: 0 reviews
 
ian's Avatar
Recipes 
 
Join Date: Jul 2005
Location: Pendleton, SC USA
Posts: 476
Liked 5 Times on 5 Posts

Default

well, I guess when I said bulk I meant like a pound or two. What is technically considered bulk?


ian is offline
 
Reply With Quote
Old 02-03-2006, 09:11 PM   #22
Baron von BeeGee
Beer Bully
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Baron von BeeGee's Avatar
Recipes 
 
Join Date: Jul 2005
Location: Barony of Fuquay-Varina, NC
Posts: 5,419
Liked 20 Times on 19 Posts

Default

I did this year buy some hops in 'bulk' that I know I use a lot. Around 8 oz was what I considered bulk just to see how it would go. I know they'll degrade over time regardless of what you do, but so far they seem to be holding up well (good color, good aroma, lupulin glands look healthy). I think a great system would be to buy a lb or so at a time, and then use a vacuum sealer to seal them off in 1oz freezeable packets.


Baron von BeeGee is offline
 
Reply With Quote
Old 02-03-2006, 09:16 PM   #23
ian
Feedback Score: 0 reviews
 
ian's Avatar
Recipes 
 
Join Date: Jul 2005
Location: Pendleton, SC USA
Posts: 476
Liked 5 Times on 5 Posts

Default

Quote:
Originally Posted by BeeGee
I think a great system would be to buy a lb or so at a time, and then use a vacuum sealer to seal them off in 1oz freezeable packets.
That's exactly what I was thinking, but those vacuum sealers are kind of expensive. I can think of better brewing equipment to drop that much on. . . .
ian is offline
 
Reply With Quote
Old 02-03-2006, 09:21 PM   #24
Baron von BeeGee
Beer Bully
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Baron von BeeGee's Avatar
Recipes 
 
Join Date: Jul 2005
Location: Barony of Fuquay-Varina, NC
Posts: 5,419
Liked 20 Times on 19 Posts

Default

Yeah, I'd pretty much need another use for a vacuum sealer before buying one (I take Alton Brown's 'no singletasker' advice seriously!). But so far doublebagging with the air squeezed out seems to be working for me. And these are leaf hops I'm talking about...I imagine pellet hops would store even better.
Baron von BeeGee is offline
 
Reply With Quote
Old 02-04-2006, 12:38 AM   #25
boo boo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2005
Location: Hearts's Delight, Newfoundland
Posts: 4,171
Liked 32 Times on 28 Posts
Likes Given: 4

Default

Ian, I hope everything goes well. If you did your homework, then I'm sure it will. I've only done 8 or so batches of AG with the majority of them being lagers. Lets hear all about it when you can post to see how you made out. Cheers.
boo boo is offline
 
Reply With Quote
Old 02-06-2006, 01:47 PM   #26
ian
Feedback Score: 0 reviews
 
ian's Avatar
Recipes 
 
Join Date: Jul 2005
Location: Pendleton, SC USA
Posts: 476
Liked 5 Times on 5 Posts

Default

well, I'm now an "all-grain" brewer. I hope it turns out, it didn't go without its fair share of mishap.

The main one being that I ran out of propane just as the boil started. So I had to zip to the convenience store and get a replacement tank. All the while my wort is cooling. It only cooled to about 205 before I got the heat back on it.

The mash tun worked like a charm, although it never really got less cloudy as I repoured the runnings back in to settle the grain bed. Not too worried about that. It held the initial temp throughout the mash, I was surprised that I didn't notice any drop.

It did have tons of chunks in it that I'm think are just protein strands.
This morning (I brewed yesterday) I don't see much yeast activity yet, but am not panicking yet. I used a whirlfloc tablet in this batch and I will say that this is the clearest its ever been in primary.
ian is offline
 
Reply With Quote
Old 02-06-2006, 04:08 PM   #27
Baron von BeeGee
Beer Bully
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Baron von BeeGee's Avatar
Recipes 
 
Join Date: Jul 2005
Location: Barony of Fuquay-Varina, NC
Posts: 5,419
Liked 20 Times on 19 Posts

Default

Nice work! Definitely give it 24hrs to get pumping, although some start faster. Did you take any efficiency readings?
Baron von BeeGee is offline
 
Reply With Quote
Old 02-06-2006, 04:29 PM   #28
ian
Feedback Score: 0 reviews
 
ian's Avatar
Recipes 
 
Join Date: Jul 2005
Location: Pendleton, SC USA
Posts: 476
Liked 5 Times on 5 Posts

Default

Quote:
Originally Posted by BeeGee
Did you take any efficiency readings?
Not really sure how to do efficiency readings but it had a pre-boil gravity of 1.04 (that was taken right before the last batch sparge so it might be off a little). I forgot to take a reading before pitching yeast.
ian is offline
 
Reply With Quote
Old 02-06-2006, 04:39 PM   #29
Baron von BeeGee
Beer Bully
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Baron von BeeGee's Avatar
Recipes 
 
Join Date: Jul 2005
Location: Barony of Fuquay-Varina, NC
Posts: 5,419
Liked 20 Times on 19 Posts

Default

The way I do it is take a gravity reading after all my runoff is complete and in the kettle. That way I have a reasonably accurate volume reading which is pretty important. I then compare that gravity reading to the theoretical yield for my grainbill at that volume. The main point is to see if you can improve your efficiency and thereby use less grains while achieving the same gravity.

Off the top of my head, and not knowing your pre-boil volume, I think 1.04 is a good pre-boil SG for 8.5# of grain...your batch sparge would have lowered that # a bit, but I'd still say it's pretty reasonable.
Baron von BeeGee is offline
 
Reply With Quote
Old 02-06-2006, 05:04 PM   #30
ian
Feedback Score: 0 reviews
 
ian's Avatar
Recipes 
 
Join Date: Jul 2005
Location: Pendleton, SC USA
Posts: 476
Liked 5 Times on 5 Posts

Default

The pre-boil volume was about 6 gallons. Using BobbyC's Beer Alchemy program we estimate that the pre-ferment gravity was about 1.042 and that the efficiency was around 75%. Estimating because there wasn't an exact volume measurement or actual pre-ferment gravity. I'm fairly pleased with that, as long as the dang yeast gets to work!


ian is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My First All-Grain Attempt. Julohan General Beer Discussion 8 09-04-2009 06:13 PM
2nd all-grain attempt procedures Brett3rThanU All Grain & Partial Mash Brewing 2 11-06-2008 06:51 PM
My first attempt at an all grain set up SomedumbJerk Equipment/Sanitation 6 03-24-2008 02:35 AM
Failed All Grain Attempt 1984CJ All Grain & Partial Mash Brewing 9 02-15-2008 07:21 AM
Help first partial grain attempt ! CrazyC Beginners Beer Brewing Forum 8 11-04-2005 06:40 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS