Question about c02 tank - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Question about c02 tank

Reply
 
Thread Tools
Old 02-12-2008, 07:54 PM   #1
Waylit
Recipes 
 
Jan 2008
Posts: 106
Liked 1 Times on 1 Posts



I finally got my kegerator built - Sanyo 4912.
I'm about to get my 1/4 keg filled but I can't get a slim quarter.
I have a 10lb tank, so I need to leave it outside the fridge.

My question is this...
How do I get the gas line from the keg coupler (inside the fridge) to the C02 regulator (outside the fridge)
The supplied tubing seems to thick to fit thru the condensation hole.

Thanks for the help.



 
Reply With Quote
Old 02-12-2008, 09:49 PM   #2
Waylit
Recipes 
 
Jan 2008
Posts: 106
Liked 1 Times on 1 Posts


Do I just drill a hole in the back of the fridge for the C02 tubing ?

 
Reply With Quote
Old 02-12-2008, 10:08 PM   #3
McKBrew
 
McKBrew's Avatar
Recipes 
 
Oct 2006
Hayden, Idaho
Posts: 8,204
Liked 35 Times on 30 Posts


I tried searching some of the threads related to this, and the closest thing I could find is someone just forcing a line through the drain hole. If you can find a way to safely establish where the cooling lines are in the back you could add an additional hole or enlarge the existing one.
__________________
Make Beer, Not War.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
CO2 tank question mangine77 Equipment/Sanitation 9 02-24-2009 10:34 PM
CO2 tank question KUbrew Equipment/Sanitation 10 01-29-2009 03:42 AM
20 lb. CO2 Tank question? brew hoperator Bottling/Kegging 2 01-05-2009 04:11 AM
CO2 tank question Donner Bottling/Kegging 12 11-19-2008 06:22 PM


Forum Jump