Secondary in the Keg - Airlock or No Airlock? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Secondary in the Keg - Airlock or No Airlock?

Reply
 
Thread Tools
Old 02-11-2008, 04:30 PM   #1
Chello
Recipes 
 
Nov 2007
Atlanta, GA
Posts: 867
Liked 9 Times on 9 Posts



I realized i have gotten a little ahead of my self and do not have any more carboys for secondaries, but i'v always heard cornies make great secondaries.

So when you secondary in the corny do you hook up an airlock? or do you just seal it like normal with a burst of co2?
__________________
"Retail is for suckers."

 
Reply With Quote
Old 02-11-2008, 07:34 PM   #2
jfish63
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Feb 2008
OC NY
Posts: 187

You need an air lock for use as a fermenter but as a secondary you should be able to just seal it. I pump min up to 30psi, bleed it off, pump it up to 30 bleed it off, then up to 10 and let it sit.

 
Reply With Quote
Old 02-11-2008, 07:59 PM   #3
Chello
Recipes 
 
Nov 2007
Atlanta, GA
Posts: 867
Liked 9 Times on 9 Posts


Cool thats what i figured would work fine. Thanks
__________________
"Retail is for suckers."

 
Reply With Quote
Old 02-11-2008, 11:50 PM   #4
malkore
 
malkore's Avatar
Recipes 
 
Jun 2007
Nebraska
Posts: 6,922
Liked 37 Times on 35 Posts


yeah, in secondary, fermentation is over, so the only CO2 present is just what's falling out of solution.

plus a corny is rated to 130psi, and then it pop's its safety valve (if not sooner) to prevent an 'explosion'.

downside to secondary in keg is that you get more sediment...the first couple pints may be too yeasty to drink, and if you move the keg, it may kick up sediment.

I like a 'traditional' secondary for about 2 weeks at cooler temps, then I keg and force carb..or keg and condition in my basement.
__________________
Malkore
Primary: English Mild
On tap: Pale Ale, Lancelot's Wheat, English Brown Ale, Steam Beer, HoovNuts IPA
Bottled: MOAM, Braggot, Raspberry Melomel, Merlot, Apfelwein, Pyment, Sweet mead, Cabernet
Gal in 2009: 27, Gal in 2010: 34, Gal in 2011: 13, Gal in 2012: 10

 
Reply With Quote
Old 02-12-2008, 01:04 AM   #5
Poindexter
 
Poindexter's Avatar
Recipes 
 
Oct 2007
interior Alaska
Posts: 1,195
Liked 5 Times on 5 Posts


I agree with malkore, the beer will drop some more sediment in 2.

If you have enough cornies you can certainly secondary in one, then rack to a serving keg.

If I am not going to move a keg around a lot I am happy to secondary and serve from the same keg. I might primary for three weeks in whatever, then rack to a keg and secondary sealed for maybe two weeks, then move it to a fridge, hook up the CO2 and start the carb process. By the time it is carbed I will have pulled enough samples to be done worrying about sediment. I generally invest two weeks in force carbign a keg.

This is with primary through an airlock now, not that spunding valve stuff wortmonger and I are playing with.

 
Reply With Quote
Old 02-12-2008, 04:45 AM   #6
Chello
Recipes 
 
Nov 2007
Atlanta, GA
Posts: 867
Liked 9 Times on 9 Posts


Yeah, i think the plan is to move whens currently in secondary to a keg to get it off as much yeast as possible, then just rack the new brews to a normal secondary.

Yeehaw...

(i'v been drinking a few pints and sometimes you just need a good yeehaw)
__________________
"Retail is for suckers."

 
Reply With Quote
Old 02-12-2008, 02:17 PM   #7
abracadabra
 
abracadabra's Avatar
Recipes 
 
Dec 2006
Newnan, Georgia
Posts: 1,923
Liked 8 Times on 8 Posts


I don't have a problem with yeast in my secondary kegs.

There are a couple of ways around the sediment on the bottom. You could simply take a torx screw driver or a phillips head that fits in snuggly and bent the tube upwards slightly to keep from pulling any sediment off the bottom and out of the beverage tube. Others cut some of the tube off.

I use these modified cornies to transfer to another corny for serving purposes but only if I plan on taking a corny for a road trip.

As far as a secondary corny that's going to stay inhouse there's no real need for a transfer even with a beverage tube that's not been modified. Yes, the first 8-12 oz. will have some sediment. Others have reported up to 32 oz. of beer with sediment, that's not been my experience so I can't say what's going on there.

But just moving the corny from the fermentation chamber to the refridgerator will not cause the sediment to resuspend unless you shake the crap out of it or turn the thing sideways or upside down.
__________________
Do what you like!
Brew what you like!


 
Reply With Quote
Old 09-03-2010, 07:22 PM   #8
hollywoodbrew
Recipes 
 
May 2010
hollywood
Posts: 101
Liked 5 Times on 2 Posts


I'm in the same boat here, and I'd like to rack from primary to lager in a keg.

Do I need to rack to another keg after aging is finished? My lagers have a lot of soluble gunk at the bottom when they are finished. Would this clog up the works? Should I run it through a filter straight from the lager keg? Or rack, then filter? Or like the above, just pour out the first couple pints?

 
Reply With Quote
Old 09-04-2010, 01:16 AM   #9
hollywoodbrew
Recipes 
 
May 2010
hollywood
Posts: 101
Liked 5 Times on 2 Posts


Bumping this, anyone have any advice on the above?

 
Reply With Quote
Old 09-08-2011, 02:21 PM   #10
natewv
Recipes 
 
Jan 2011
baltimore, md
Posts: 201
Liked 5 Times on 3 Posts


So I am out of buckets, and I just bought kegs and a tank so I was planning to use a keg as a secondary. I have never used the tank before, why do I need to pressurize it for use as secondary? Just to seal and mitigate the need for an airlock? Couldn't I just dry hop in the keg and seal it?

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Secondary with no Airlock. What should I watch for? Ohio-Ed Fermentation & Yeast 1 08-24-2009 02:10 PM
Need airlock for secondary? shoemaker27 Beginners Beer Brewing Forum 2 08-09-2009 05:58 PM
is airlock needed on secondary addis29 General Techniques 4 01-29-2009 05:55 PM
Secondary Carboy - Airlock? grace1760 Beginners Beer Brewing Forum 9 07-11-2008 08:43 PM
no bubbles from airlock on secondary S_carve Beginners Beer Brewing Forum 11 12-12-2006 01:33 AM


Forum Jump