Gas line touching cold plate

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BigTerp

Well-Known Member
Joined
Jun 13, 2011
Messages
555
Reaction score
63
Location
Falling Waters
Got all my parts in today to convert my new to me Nostalgia kegerator into a two tap homebrew machine. In order to get a double body regulator, 5# CO2 tank and two kegs crammed into it, I have to position my tank and regulator in such a way that one of the gas lines is up against the cold plate. Is this going to be a problem? I have an 80mm computer fan running 24/7, but the cold plate does get a bit of ice on it. Not sure if that's going to cause any issues with the CO2 line that's up against it or not.

Here is what I'm working with. The CO2 line on the left hits the cold plate right after the regulator barb. It's pretty tight, but everything fits.
IMG_20150802_003854_zpsypirlili.jpg
 
Won't cause an issue for the gas lines.

Just keep the beer lines away from it because they WILL freeze up solid.
 
Back
Top