Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Moving the primary
Reply
 
Thread Tools
Old 02-05-2008, 04:23 PM   #1
cfos
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2008
Posts: 28
Default Moving the primary

Hi. Currently brewing my first batch. This morning the air-lock was bubbling; however, I had to move it (out of the way) of some cabinets. After moving it, it seemed that the bubbling stopped. I didn't notice any action for about 1 or 2 minutes, but have since had to go to work so I'm not sure if it has picked up again. It had been bubbling overnight for several hours and am curious if I (temporarily?) disrupted fermentation...? Can I expect it to resume?


cfos is offline
 
Reply With Quote
Old 02-05-2008, 04:31 PM   #2
mjking77
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2006
Location: Portsmouth, VA
Posts: 31
Default

Your beer is fine. You did not affect the fermentation.

I am assuming that you are fermenting in a bucket. When you moved the bucket, you relieved some of the pressure built up in the headspace of the bucket. Once that pressure rebuilds you will see more activity in the airlock.


__________________
Primary 1: Brown Ale
Primary 2: Empty
Secondary: Empty
Bottle Conditioning: None
Drinking:

Up Next: IPA
mjking77 is offline
 
Reply With Quote
Old 02-05-2008, 04:35 PM   #3
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Revvy's Avatar
Recipes 
 
Join Date: Dec 2007
Location: "Detroitish" Michigan
Posts: 40,812
Liked 2868 Times on 1696 Posts
Likes Given: 3510

Default

I'm sure it's fine. I've disturbed them on occasion...Usually the opposite happens, a slow fermentation suddenly kicks up a notch or two.

Are you usuing a 3 piece airlock? The inner piece may a little dislodged and stuck on a co-2 bubble. Or the stopper, or gasket might be a little dislodged. You can tap it with a finger tip when you get home, and also make sure the whole airlock is seated right.
__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew
Revvy is offline
 
Reply With Quote
Old 02-05-2008, 04:38 PM   #4
cfos
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2008
Posts: 28
Default

Thanks for the rapid replys. I am doing the primary fermantation in a plastic bucket with a plastic conical airlock. I'm pretty sure it is the three piece. I did check to see if I had pressure and everything appeared air-tight when I depressed the lid.
cfos is offline
 
Reply With Quote
Old 02-05-2008, 05:06 PM   #5
daryk77
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2007
Location: Waterloo, Ontario
Posts: 46
Default

happens all the time with fermenting in a plastic bucket, some of the pressure is pushed out from the handle pressing against the bucket as well as from depressing the lid. usually builds back up with in seconds to minutes, depending on what stage of fermentation you are in. Just moved one of my plastic buckets today, same thing happened.
daryk77 is offline
 
Reply With Quote
Old 02-05-2008, 06:06 PM   #6
TheJadedDog
AFK ATM
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
TheJadedDog's Avatar
Recipes 
 
Join Date: Aug 2006
Location: People's Republic of Cambridge
Posts: 3,323
Liked 7 Times on 7 Posts

Default

Not to worry, everything should be fine. It takes a lot to really mess up your beer.
__________________
And now we go AG!

On Tap: Nadda
Primary: Nadda
Planning: Extra Special Bitter
TheJadedDog is offline
 
Reply With Quote
Old 02-05-2008, 08:07 PM   #7
cfos
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2008
Posts: 28
Default

Quote:
Originally Posted by TheJadedDog
Not to worry, everything should be fine. It takes a lot to really mess up your beer.
I'm really hoping that's true! I'm looking forward to transfering this batch into a secondary and starting another in the bucket.


cfos is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving primary for bottling..? Runyanka Beginners Beer Brewing Forum 15 01-03-2013 12:15 AM
moving from primary to secondary JamesL Beginners Beer Brewing Forum 8 07-14-2009 04:33 AM
How gentle do I need to be moving to primary? impatient Beginners Beer Brewing Forum 10 01-06-2009 03:33 PM
moving from primary to secondary bkvail Wine Making Forum 2 11-14-2008 02:49 PM
Moving primary or secondary? Ernie3 Beginners Beer Brewing Forum 8 10-13-2008 07:43 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS