Process value incorrect ???

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

lehr

Well-Known Member
Joined
Dec 2, 2008
Messages
785
Reaction score
17
Location
flushing michigan
Hello all it's been awhile,

I have a auber syl-2352 I have been using it for about 5 years. I was brewing yesterday and the process value was reading screwy, as the temp of the mash went up the PV went down.
Any suggestions to why this is happening would be apperciated.

Thanks,
Pat
 
It's probably not going to solve your problem but check that the connections (screw terminals, crimps on lugs, pins on connectors...) to the RTD are all clean. They can with age and exposure to the brewery environment corrode and or oxidize. This usually leads to high and/or erratic readings but it won't hurt to check.
 

Latest posts

Back
Top