Why is efficiency different (Beersmith)

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

brewprint

Well-Known Member
Joined
May 7, 2014
Messages
1,616
Reaction score
169
On my recipe at the top of the tab for design I have 70% in the tab that says TotEfficiency. Is then says in the estimated OG for this recipe to be 1.060.

My OG ended up being 1.062 and on the same design tab I put 1.062 in there and it says 65.9%.

What am I missing here? I thought I would have a better efficiency with a higher OG.
 
You're missing the correct volume (measured batch size) into the fermenter on the 'fermentation' tab.
 
Back
Top