emueller
Member
After many years of enjoyment I am selling my full home-brew system. I am only interested in selling the full package together. Everything is in good working condition. Resell, hold for back-up or gift anything extra you dont need. Purchased new, easily more than $5,000. You will need to arrange pick-up. I am located in northern New Jersey (07450). Let me know if you have any questions.
Item is listed on eBay:
http://www.ebay.com/itm/161677905702?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
10 Gallon MoreBeer Tippy-Dump BrewSculpture Stainless Steel Frame
Propane Gas System
26 Gallon Mash Tun (upgrade to make big beers)
15 Gallon Hot Liquor Tank
15 Gallon Brew Kettle
Stainless Steel quick-connect hoses
March Pump
Stainless Steel Sparge Arm Assembly
S.M.A.R.T. Heat Exchanger
All Necessary Tubing
Custom Sunbrella Cover (~ $500) unit always stored indoors
Blichmann 14 Gallon Fermenator Conical (Tri-Clover Fittings) and Leg Extensions
Stand-up Freezer with Temperature Controller to hold Fermenator
Three Roller Monster Mill Powered by Electric Motor w/ Galvanized Hopper
Three Cornelius Kegs (new variety, not reused)
Three Perlick Faucets
Complete CO2 System to drive three kegs to three faucets (CO2 cylinder, hoses, etc.)
Keezer (if you want)
Miscellaneous
Stir Plate
20 lb grain scale
Shirron Plate Chiller w/ Quick Connect Fittings
Several Pounds of Hops
Cleaning Chemicals
Item is listed on eBay:
http://www.ebay.com/itm/161677905702?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
10 Gallon MoreBeer Tippy-Dump BrewSculpture Stainless Steel Frame
Propane Gas System
26 Gallon Mash Tun (upgrade to make big beers)
15 Gallon Hot Liquor Tank
15 Gallon Brew Kettle
Stainless Steel quick-connect hoses
March Pump
Stainless Steel Sparge Arm Assembly
S.M.A.R.T. Heat Exchanger
All Necessary Tubing
Custom Sunbrella Cover (~ $500) unit always stored indoors
Blichmann 14 Gallon Fermenator Conical (Tri-Clover Fittings) and Leg Extensions
Stand-up Freezer with Temperature Controller to hold Fermenator
Three Roller Monster Mill Powered by Electric Motor w/ Galvanized Hopper
Three Cornelius Kegs (new variety, not reused)
Three Perlick Faucets
Complete CO2 System to drive three kegs to three faucets (CO2 cylinder, hoses, etc.)
Keezer (if you want)
Miscellaneous
Stir Plate
20 lb grain scale
Shirron Plate Chiller w/ Quick Connect Fittings
Several Pounds of Hops
Cleaning Chemicals