Bottled beer is low on carbonation after secondary fermenter - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Bottled beer is low on carbonation after secondary fermenter
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 12-26-2007, 01:16 AM   #1
the_wrath_of_Khan
Recipes 
 
Nov 2007
Japan
Posts: 58


I recently made some English Bitter that came out very tasty. I had racked it to a secondary fermenter before bottling to help reduce the amount of sediment in the final bottled beer. Weather, temperature and priming sugar were all essentially the same as the other batches I have made, but they had an appropriate amount of CO2 and this bitter is almost flat. How do you ensure enough yeast is in the bottle to create CO2 when it coverts the sugar?



 
Reply With Quote
Old 12-26-2007, 01:40 AM   #2
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 68,515
Liked 7368 Times on 5208 Posts


You'd have to leave it in secondary for more than 2 or 3 months for carbonation to be affected. It will be ok, just keep it at 70 degrees until it does carbonate!


__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 12-26-2007, 02:15 AM   #3
Kai
 
Kai's Avatar
Recipes 
 
Mar 2007
Halifax, Canada
Posts: 641
Liked 8 Times on 3 Posts


What yeast did you use? Some bitter yeasts - I'm thinking Wyeast 1968, Safale S-04 - are extremely flocculant, that is to say, they fall out of your beer really well, leaving it nice and clear. There will still be yeast in your bottles; perhaps less, hence longer carbonation times, but it's there, and it will finish the job.

Kai

EDIT: You might try agitating the bottles a little to get the yeast back into suspension to finish the job. That's occasionally been necessary for me when I use Wyeast 1968. I've never used S-04.
__________________
Next: Tousted Out Stoat, Hop Bomb, Ordinary Bitter
Bubbling: Belgian Summer Bitter, Vienna Steam Beer
Conditioning:Greenwall Lambic
Kegged: Christmas Ale
Bottle Conditioning:
Drinking: Saison Bātard

The Green Wall Nanobrewery
tibi non nolis


 
Reply With Quote
Old 12-26-2007, 02:34 AM   #4
the_wrath_of_Khan
Recipes 
 
Nov 2007
Japan
Posts: 58

Quote:
Originally Posted by Kai
What yeast did you use? Some bitter yeasts - I'm thinking Wyeast 1968, Safale S-04 - are extremely flocculant, that is to say, they fall out of your beer really well, leaving it nice and clear. There will still be yeast in your bottles; perhaps less, hence longer carbonation times, but it's there, and it will finish the job.

Kai

EDIT: You might try agitating the bottles a little to get the yeast back into suspension to finish the job. That's occasionally been necessary for me when I use Wyeast 1968. I've never used S-04.
The temp is right for carbonation, so I will try to agitate them tonight.

 
Reply With Quote
Old 12-26-2007, 06:39 PM   #5
malkore
 
malkore's Avatar
Recipes 
 
Jun 2007
Nebraska
Posts: 6,922
Liked 37 Times on 35 Posts


An English bitter should have low carbonation.

http://www.bjcp.org/styles04/Category8.html

"May have very little head due to low carbonation."
__________________
Malkore
Primary: English Mild
On tap: Pale Ale, Lancelot's Wheat, English Brown Ale, Steam Beer, HoovNuts IPA
Bottled: MOAM, Braggot, Raspberry Melomel, Merlot, Apfelwein, Pyment, Sweet mead, Cabernet
Gal in 2009: 27, Gal in 2010: 34, Gal in 2011: 13, Gal in 2012: 10

 
Reply With Quote
Old 12-26-2007, 07:15 PM   #6
Got Trub?
Recipes 
 
Apr 2007
Washington State
Posts: 1,538
Liked 9 Times on 7 Posts


I concur - give them more time in a warm environment. As Malkore said though you want low carbonation. I target about 1.5 vol of CO2 and serve at 55F. I use the 1968 alot and it results in a crystal clear beer quickly - I go from brew day to drinking in 6 weeks.

GT

 
Reply With Quote
Old 12-26-2007, 09:22 PM   #7
the_wrath_of_Khan
Recipes 
 
Nov 2007
Japan
Posts: 58

Quote:
Originally Posted by malkore
An English bitter should have low carbonation.

http://www.bjcp.org/styles04/Category8.html

"May have very little head due to low carbonation."
Thanks for the post. If I added the same amount of priming sugar as I always do wouldn't it produce the same amount of carbonation as my other beers? I have only had commercial examples of bitter before which were plenty carbonated.

I agitated all the remaining bottles last night and I will let them sit for a while.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Increasing carbonation of already bottled beer DNW Bottling/Kegging 1 11-02-2009 02:29 PM
I now filter my beer - is there any point to the secondary fermenter anymore? fastricky General Techniques 25 09-09-2009 09:24 PM
A ton of carbonation ( Bottled ) Mustangj Bottling/Kegging 15 09-11-2007 05:37 PM
How long should I leave a beer in the primary fermenter if I'm not using a secondary? Bosh Extract Brewing 6 05-04-2007 01:44 PM
Temperature Instability and Effect on Secondary/Bottled Beer efreem01 Beginners Beer Brewing Forum 1 04-24-2007 10:49 PM


Forum Jump