The Brew Stand Incredible Giveaway - Home Brew Forums

Register Now!
Home Brew Forums > Sponsor Showcase > Sponsor Showcase > The Brew Stand Incredible Giveaway

Closed Thread
 
Thread Tools
Old 06-02-2014, 08:21 PM   #1
TxBrew
Administrator
HBT_ADMIN.png
 
TxBrew's Avatar
Recipes 
 
Feb 2004
Posts: 9,029
Liked 2195 Times on 768 Posts



The Brew Stand Incredible Giveaway


Our friends at Brewers Hardware have offered this Single Tier Brew Stand for one lucky winner!

Click image for larger version

Name:	Giveawat  HBT - BHLogo    brewers stand.png
Views:	9278
Size:	23.4 KB
ID:	203289

Quote:
"The Brew Stand" is a single tier brew stand designed for most 15-20 gallon kettles 16" in diameter, including 'Keggles'. 7 years in the making, our unique design maximizes airflow around the burners while minimizing heat wash up the fronts of the kettles, keeping the front of the system as cool as possible. The back of each burner bay is open to allow the exhaust gases to escape out the back. The burner mount heat shield is flush with the bottom of the deck, but open in the back, directing most of the heat rearward. The burner mount heat shields are the same ones we sell and designed to mount out BURN10 10" banjo style burner or a Bayou BJ14.

Click image for larger version

Name:	Giveaway HBT June - brewing stand  BH5418.jpg
Views:	8496
Size:	47.1 KB
ID:	203290
Quote:
Starting from the top, the deck of the stand is constructed of 2" square 16 guage 304 stainless. The deck is supported by 2" diameter .065" wall round tubing legs to fully support kettles to 20 gallon. All of the lateral structural supports are 1.5" .065 wall round tubing. The advantage of the round tubing is we can make most of the welds in our rotary welding lathe, providing a single continuous weld with only one start/stop, providing a single consistent and nearly invisible weld at those points. All of the material cuts are made on a high-end Doringer cold saw, allowing for nearly perfect weld-ready cuts free of discoloration and contamination of an abrasive cut-off saw. (Going off on a tangent: cold saws are really cool! If you've never seen one, they're like a wood miter saw but only turn 54 RPM. The material is clamped in a vise while the 14" fine-toothed blade is flooded with coolant while it cuts, essentially milling through the material without heating it. ) After welding, all of the welds are cleaned and repassivated with an electro-chemical weld cleaner.
Quote:
The Brew Stand includes the stand itself, burner mount/heat shields, 2 pump mounts (very cool, they clamp in place on the 1.5" tubing, allowing you to adjust their position to align to your kettles.) and Total Locking casters that lock on both roll and rotation.
Front view of the stand

Click image for larger version

Name:	giveaway hbt - june BH5418Front.jpg
Views:	8473
Size:	38.1 KB
ID:	203293

The Pump Mount

Click image for larger version

Name:	Giveaway HBT - brewstand BH5418PumpMount.jpg
Views:	8507
Size:	33.4 KB
ID:	203294

The Weld Detail

Click image for larger version

Name:	giveaway hbt - brewstand BH5418WeldDetail.jpg
Views:	8445
Size:	22.2 KB
ID:	203295

The Leg Detail

Click image for larger version

Name:	giveaway hbt - june BH5418LegDetail.jpg
Views:	8443
Size:	28.0 KB
ID:	203296


Rules & Entry

- To enter, reply to this thread one time.

- Forum entry limited to Supporting Members only.

- Shipping to be paid by winner if outside of the contiguous United States.

On June26th we will close this giveaway, put all the names in a box, and draw a winner on June 27th.

Thanks to Brewers Hardware for this awesome donation!

The winner will have 24 hours from the time the winner is posted to claim their prize. If you do not respond with your address within that time a new winner will be chosen. The same rules apply to the next winner.

Click image for larger version

Name:	Giveawat  HBT - BHLogo    brewers stand.png
Views:	9278
Size:	23.4 KB
ID:	203289


No purchase necessary. To enter by mail send full name, address, phone number to HBT PO BOX 911 San Marcos, Texas 78667. Entries must be received by June 26th, 2014. Void where prohibited.
__________________
#zappabeefheart2016

Register Now!


9
People Like This 
Old 06-06-2014, 01:35 PM   #2
TxBrew
Administrator
HBT_ADMIN.png
 
TxBrew's Avatar
Recipes 
 
Feb 2004
Posts: 9,029
Liked 2195 Times on 768 Posts


Time to enter! You only have three weeks, so don't delay!
__________________
#zappabeefheart2016

Register Now!

1BIGDUDE Likes This 
Old 06-06-2014, 01:40 PM   #3
mtnagel
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Apr 2012
Cincinnati, Ohio
Posts: 2,378
Liked 224 Times on 181 Posts


in
__________________
-Matt

 
Old 06-06-2014, 01:41 PM   #4
sompls
HBT_SUPPORTER.png
 
sompls's Avatar
Recipes 
 
Oct 2013
South Minneapolis
Posts: 760
Liked 268 Times on 179 Posts


Me too


Sent from my iPhone using Home Brew

gwshunn Likes This 
Old 06-06-2014, 01:41 PM   #5
jimyson
HBT_LIFETIMESUPPORTER.png
 
jimyson's Avatar
Recipes 
 
Jul 2013
Westerville, Ohio
Posts: 562
Liked 99 Times on 71 Posts


Thanks Brewers Hardware! This is a fantastic prize.
__________________
beer

 
Old 06-06-2014, 01:42 PM   #6
Doctor_M
HBT_LIFETIMESUPPORTER.png
 
Doctor_M's Avatar
Recipes 
 
May 2012
Falls Church, VA
Posts: 860
Liked 110 Times on 83 Posts


Innnnn!

 
Old 06-06-2014, 01:43 PM   #7
Njswalker
HBT_SUPPORTER.png
 
Njswalker's Avatar
Recipes 
 
Aug 2013
Posts: 20

I'm in

 
Old 06-06-2014, 01:43 PM   #8
macewank
HBT_SUPPORTER.png
Recipes 
 
Jun 2011
Bloomington, IL
Posts: 20


you know I'm in!! This looks AWESOME

 
Old 06-06-2014, 01:44 PM   #9
Vetter
HBT_SUPPORTER.png
 
Vetter's Avatar
Recipes 
 
Mar 2014
Vestaburg, Mi.
Posts: 50
Liked 7 Times on 5 Posts


In, just what I need!
__________________
Behold the rain which descends from heaven upon our vineyards, there it enters the roots of the vines, to be changed into wine, a constant proof that God loves us, and loves to see us happy.
Benjamin Franklin

 
Old 06-06-2014, 01:44 PM   #10
Kasrkin
HBT_SUPPORTER.png
 
Kasrkin's Avatar
Recipes 
 
May 2012
Shreveport, Louisiana
Posts: 69
Liked 1 Times on 1 Posts


I'm so in!!!!!

 
Closed Thread
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fish Tank Stand for Brew Stand aredling Brew Stands 4 02-26-2012 09:17 PM
Brew Stand build (Mini Brew Stand) Espi Brew Stands 20 05-07-2011 01:06 AM


Forum Jump