Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Gas/liquid tubing
Reply
 
Thread Tools
Old 05-29-2014, 02:38 AM   #1
donshizzles
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Orinda, CA
Posts: 199
Liked 3 Times on 3 Posts
Likes Given: 9

Default Gas/liquid tubing

Forgive me if this question has been asked ad nausea......but what type of tubing is best for CO2 gas from tank to manifold, manifold to corny and beer from corny to tap?
Also, what are the proper lengths of tubing needed for these 3?

DS


donshizzles is offline
 
Reply With Quote
Old 05-29-2014, 02:49 AM   #2
Yooper
Ale's What Cures You!
HBT_ADMIN.png
Feedback Score: 0 reviews
 
Yooper's Avatar
Recipes 
 
Join Date: Jun 2006
Location: UP of Michigan
Posts: 66,016
Liked 6229 Times on 4438 Posts
Likes Given: 1681

Default

The gas line doesn't matter, as long as it fits from the regulator to the "in" disconnects on your keg, it's fine. I use the red gas line, like for air compressors, but you can use beer line if you want.

For the beer line, you need 3/16" beverage line tubing, approximately 10-12' per tap for most cases.


__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

Follow me on facebook: https://www.facebook.com/lorena.t.evans
But I'm pretty boring so don't expect much!
https://www.facebook.com/lorena.t.evans
Yooper is offline
 
Reply With Quote
Old 05-29-2014, 02:50 AM   #3
Mordhaus
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2013
Location: Fort Worth, TX
Posts: 86
Liked 12 Times on 9 Posts
Likes Given: 13

Default

I use Bevflex on both the gas and liquid side. Gas length doesn't matter though I have one line from my manifold that's five feet long so I can pressurize clean kegs outside the keezer. The rest are just long enough to reach their respective keg. All of my beer lines are 3/16" x 10' and pour wonderfully.
Mordhaus is offline
 
Reply With Quote
Old 05-30-2014, 04:32 AM   #4
donshizzles
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Orinda, CA
Posts: 199
Liked 3 Times on 3 Posts
Likes Given: 9

Default

Thank you guys. What size tubing do I need for gas?
donshizzles is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tubing - Liquid and Gas - What to use? theck Equipment/Sanitation 18 02-27-2014 02:01 AM
Liquid side tubing question snyklez Bottling/Kegging 7 08-10-2013 02:26 PM
Is there a difference between beer line tubing and siphon tubing? Richard-SSV Bottling/Kegging 2 01-10-2013 04:22 PM
march pump, high temp tubing: hard to see end of liquid pennisim Equipment/Sanitation 8 01-17-2011 12:12 AM
Can I reuse keg tubing (gas/liquid)? aeonderdonk Bottling/Kegging 5 10-09-2009 06:31 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS