Got a free Kegerator - needs cosmetic repair though - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Got a free Kegerator - needs cosmetic repair though
Cool Brewing Corny 5G & Mini Giveaway

Reply
 
Thread Tools
Old 12-04-2007, 05:01 PM   #1
MediaMikes
Recipes 
 
Join Date: Oct 2007
Location: Amarillo
Posts: 90

does anybody here have a good site that shows how to repair cosmetic damage to kegerators (i.e. the door is dented, scuffs all over and the stainless top has some dents in it.). Also, does anybody know a good reputable site for ordering replacement parts for these things? The unit works great, just looks bad and thought that I could clean up a little if I could find some information on going about it.

Thanks



 
Reply With Quote
Old 12-04-2007, 05:16 PM   #2
El_Borracho
Recipes 
 
Join Date: Oct 2007
Posts: 260

Post a picture.. I'm sure you can buy replacement parts form the manufacturer, like doors, seals, trimming, etc.. You will probably want to replace your tap with a new one. We're going to need to see it to make suggestions, other than go buy stuff from the manufacturer.

I'm planning on replacing my appliances next year, I will use my current fridge as a beer fridge, eventually make it so I have kegs/taps on the bottom, and bottles on the top. This way when people bring crap it doesn't need to go in my main fridge. I will have my artist air brush, or paint it. I may just end up painting it mat black myself and having a few magnets made.. One large one with the brewery name and maybe roman numbers along the bottom.. Chalk board on the side with what beer is under each roman numeral.. Just an idea..


__________________
5 gallon [US, liquid] = 640 ounce [US, liquid]

 
Reply With Quote
Old 12-04-2007, 05:17 PM   #3
Joker
 
Joker's Avatar
Recipes 
 
Join Date: Nov 2007
Location: Orygun
Posts: 1,950
Liked 32 Times on 29 Posts
Likes Given: 4


As far as dents and stainless there isnt much you can do other then replace it. There are some pullers out there depeding on the size of the dents that you might be able to pull them out. However, most if not all body repair requires a bit of putty to smooth the finish which you obviously can't do with stainless. As for as the scratches if it has a brushed finish you could sand and attempt to put the same finish on it.

I think your best bet is just to hide it and use a tower for serving and keep the kegerator out of site.

 
Reply With Quote
Old 12-04-2007, 05:26 PM   #4
El_Borracho
Recipes 
 
Join Date: Oct 2007
Posts: 260

Damn, contact one of those Dent Specialist. There is a dude around here that does paint-less dent removal. Just thought of that..
__________________
5 gallon [US, liquid] = 640 ounce [US, liquid]

 
Reply With Quote
Old 12-04-2007, 05:32 PM   #5
MediaMikes
Recipes 
 
Join Date: Oct 2007
Location: Amarillo
Posts: 90

I thought of that also. I will try and get a picture of it tonight for ya'll (sorry, from Texas). The kegerator came from a bar in Austin somewhere and it appears to be pretty old (10 years or so). I figured I would just sand down the sides (currently it's a fake wood color) and paint it black or something. Mainly I just need a new door and a reasonable place to buy new lines and hardware.

 
Reply With Quote
Old 12-04-2007, 05:35 PM   #6
wihophead
Recipes 
 
Join Date: Jul 2007
Location: Racine, Wisconsin
Posts: 700
Liked 3 Times on 2 Posts


How about body filler and a coat of paint......

 
Reply With Quote
Old 12-04-2007, 06:13 PM   #7
MediaMikes
Recipes 
 
Join Date: Oct 2007
Location: Amarillo
Posts: 90

yeah, that's probably what I will do for the sides, but I would like to get a new door for it.

 
Reply With Quote
Old 12-04-2007, 09:49 PM   #8
El_Borracho
Recipes 
 
Join Date: Oct 2007
Posts: 260

Talk to ollllo I think he has some glass doors he would be willing to part with.. if you want to do something custom..
__________________
5 gallon [US, liquid] = 640 ounce [US, liquid]

 
Reply With Quote
Old 12-04-2007, 10:14 PM   #9
Donasay
Recipes 
 
Join Date: Oct 2007
Location: Boston
Posts: 1,563
Liked 8 Times on 8 Posts


Most fake wood finish is actually laminated, you should try to peel it off, then remove the glue, then sand, then fill the gouges, then sand, then paint, then apply sealant. Don't forget to seal it!

I actually recently sanded down my chest freezer filled the scrapes sanded it down again then painted it a nice high gloss black using my friends pneumatic paint gun. I brought it home and it was beautiful for about 2 weeks, I forgot to put a protective sealer on it, and it scratches through to the metal very easitly. Despite this shortcoming, I think it is still good looking.
__________________
No matter how rich you are, you can still only drink 16 or 17 liters of beer a day.

Quote:
Originally Posted by quixotic View Post
The true definition of an addiction: not stopping even when a dog is having his way with you.:D
http://www.solutionsinmetal.com/

 
Reply With Quote
Old 12-04-2007, 11:09 PM   #10
HenryHill
HBT_LIFETIMESUPPORTER.png
 
HenryHill's Avatar
Recipes 
 
Join Date: Mar 2007
Location: Perry, MI
Posts: 3,035
Liked 11 Times on 11 Posts
Likes Given: 6


"Paint hides a lot of sins...."


__________________
Quote:
Originally Posted by orfy
Never mock another man's brewery.
Quote:
Originally Posted by IrregularPulse View Post
This is HBT of course. Normal Thread that goes every direction but the one intended. This forum should be scientific proof the beer causes ADD

 
Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
FREE STAINLESS!! Kegerator? COLObrewer Kegerators and Keezers 30 03-27-2009 02:33 PM
Cosmetic Question RockfordWhite Bottling/Kegging 2 02-27-2009 09:37 PM
My (almost) Free Kegerator SOB Home Brewing Photo Forum 5 08-17-2008 06:36 PM
My (almost) Free Kegerator SOB Kegerators and Keezers 2 08-09-2008 01:47 PM
free kegerator being given away Digital Milk Bottling/Kegging 6 11-02-2007 04:03 PM


Forum Jump