Show us your sculpture or brew rig - Page 265 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Show us your sculpture or brew rig

Reply
 
Thread Tools
Old 07-21-2013, 01:02 AM   #2641
Spargster
HBT_SUPPORTER.png
 
Spargster's Avatar
Recipes 
 
Aug 2012
Cedarburg, WI
Posts: 64
Liked 2 Times on 2 Posts


Quote:
Originally Posted by orangehero
I've read that using gas indoors requires significantly more ventilation than that to remove the excess heat, combustion gasses, and moisture.

http://www.theelectricbrewery.com/ventilation
Thanks for the link, I will check it out for sure. Having said that high CFM blowers/fans are pricy so going with what the budget allows and compensating by having the fresh air inlet and doubling up on the CO detectors. I had no issues so far even with 90min boils.

 
Reply With Quote
Old 08-07-2013, 09:44 PM   #2642
WestCoastBrew
 
WestCoastBrew's Avatar
Recipes 
 
Aug 2013
Irvine, CA
Posts: 60
Liked 8 Times on 4 Posts


__________________
Joe
westcoastbrewer.com
Home Brewing Blog

2
People Like This 
Reply With Quote
Old 08-08-2013, 11:44 AM   #2643
bd2xu
 
bd2xu's Avatar
Recipes 
 
Jul 2012
Atlanta, GA
Posts: 942
Liked 48 Times on 43 Posts


Very nice! Is that strut? Painted or powder coated?
__________________
On Deck: ?
Primary:
Secondary: Cucumber Kolsch
On tap: Czech Pils, Munich Dunkel, Petite Saison D'Ete
Bottled: Wee Heavy, RIS - Bourbon/Oak aged, RIS - Port Wine/Oak aged

 
Reply With Quote
Old 08-09-2013, 05:49 PM   #2644
Fordzilla
 
Fordzilla's Avatar
Recipes 
 
Nov 2011
Rochester, NY
Posts: 442
Liked 26 Times on 24 Posts


What does everyone use for a regulator with the Bayou Classic 10" burners? The 30 PSI regulator on Amazon has mixed reviews, and a friend of mine with a Bayou Classic turkey frier has trouble with his 30 PSI regulator.

 
Reply With Quote
Old 08-09-2013, 06:00 PM   #2645
FredTheNuke
Recipes 
 
Feb 2012
Charlotte, NC
Posts: 796
Liked 86 Times on 69 Posts


The 30 psi regulator from Amazon. I have yet to have issues with it.

 
Reply With Quote
Old 08-09-2013, 06:05 PM   #2646
bd2xu
 
bd2xu's Avatar
Recipes 
 
Jul 2012
Atlanta, GA
Posts: 942
Liked 48 Times on 43 Posts


Quote:
Originally Posted by FredTheNuke
The 30 psi regulator from Amazon. I have yet to have issues with it.
Ditto. I currently use a kab4 which has the 10" burner and 30 psi reg that came with it, it rocks. For my keggle I modified the burner to raise it up a lot closer to the keggle bottom which was a huge improvement. I only go less than 50% on the gas flow and its plenty.
__________________
On Deck: ?
Primary:
Secondary: Cucumber Kolsch
On tap: Czech Pils, Munich Dunkel, Petite Saison D'Ete
Bottled: Wee Heavy, RIS - Bourbon/Oak aged, RIS - Port Wine/Oak aged

 
Reply With Quote
Old 08-09-2013, 06:25 PM   #2647
Fordzilla
 
Fordzilla's Avatar
Recipes 
 
Nov 2011
Rochester, NY
Posts: 442
Liked 26 Times on 24 Posts


Good enough for me! I'll order one and see how it goes.

 
Reply With Quote
Old 08-09-2013, 06:32 PM   #2648
bd2xu
 
bd2xu's Avatar
Recipes 
 
Jul 2012
Atlanta, GA
Posts: 942
Liked 48 Times on 43 Posts


Quote:
Originally Posted by Fordzilla
Good enough for me! I'll order one and see how it goes.
The only trouble I've had, now that I think of it, is a couple times I couldn't get a good flame at all. I disconnected from the tank and reconnected... Voila. It has To be on there just right.
__________________
On Deck: ?
Primary:
Secondary: Cucumber Kolsch
On tap: Czech Pils, Munich Dunkel, Petite Saison D'Ete
Bottled: Wee Heavy, RIS - Bourbon/Oak aged, RIS - Port Wine/Oak aged

 
Reply With Quote
Old 08-10-2013, 02:31 PM   #2649
Beeskneesbrew
Recipes 
 
Mar 2011
Des Moines, Iowa
Posts: 128
Liked 3 Times on 2 Posts


Nearly done.... need a rims tube and some control panel labels!

Click image for larger version

Name:	ForumRunner_20130810_093136.png
Views:	1415
Size:	338.4 KB
ID:	140871

 
Reply With Quote
Old 08-11-2013, 04:53 PM   #2650
HartBlood
Recipes 
 
Sep 2011
Meridian, Idaho
Posts: 15

Quote:
Originally Posted by bd2xu View Post
The only trouble I've had, now that I think of it, is a couple times I couldn't get a good flame at all. I disconnected from the tank and reconnected... Voila. It has To be on there just right.
The 30 psi regulator from Amazon has a safety. To reset it you need to disconnect from the tank. Open your tank slow to keep from tripping this safety.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Show Me Your Wood Brew Sculpture/Rig twst1up Brew Stands 982 Yesterday 08:52 PM
My new brew sculpture Lil' Sparky All Grain & Partial Mash Brewing 28 04-04-2016 07:26 PM
First all grain brew (with amazing brew sculpture pic) alpo All Grain & Partial Mash Brewing 15 02-14-2016 03:32 AM
brew sculpture? beerme Equipment/Sanitation 10 09-18-2013 02:40 AM
Brew Sculpture ? lpdean Equipment/Sanitation 13 05-13-2009 11:40 AM


Forum Jump