Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > March Pump Problem
Reply
 
Thread Tools
Old 11-23-2007, 12:04 AM   #1
davidkrau
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2006
Posts: 211
Default March Pump Problem

I have a March pump which I purchased from Midwest Supplies. It works great once it gets primed. I use it to pump hot wort through a counter flow cooler and into a corboy. The problem I have I can't prime the pump whin it is hooked up to the CFC. I have to disconnect the the hose from the CFC then get it started by pumping a small amount intp a pitcher then hooking it back up to the CFC after that it pumps great. I'm afraid I'll get burned from hot wort one of these days. The pump is several feet below the boiler outlet. Any suggestions?


davidkrau is offline
 
Reply With Quote
Old 11-23-2007, 12:45 AM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 3 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,595
Liked 1231 Times on 810 Posts
Likes Given: 31

Default

I have a few tips. The real solution is to plumb in a TEE on the outlet where one outlet goes to a ball valve and the other goes to a hose barb to the CFC. That will allow you to open up an air vent for priming.

Without doing that, you can lower the pump below the kettle outlet and the CFC and orient the outlet of the pump UP so the air can rise into the CFC. It takes about 2 minutes for the bubbles to work out. I plan to try putting an air purge valve in from Home Depot meant for getting air out of hydronic heating systems.
__________________
Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.
Bobby_M is online now
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why won't my March pump march? wildwest450 Equipment/Sanitation 12 10-09-2011 04:01 PM
How high can a March Pump--pump? jlosbor Equipment/Sanitation 18 07-02-2010 03:13 PM
Major problem with march pump. AshtrayDinner Equipment/Sanitation 15 08-05-2009 03:23 AM
Problem with my march pump... lesyphon Equipment/Sanitation 10 06-19-2009 02:35 AM
March pump problem baer19d Equipment/Sanitation 20 05-26-2009 08:53 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS