Wiring diagram help for direct fired system - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Automated Brewing Forum > Wiring diagram help for direct fired system

Reply
 
Thread Tools
Old 01-01-2014, 05:34 PM   #1
motorhead69
HBT_SUPPORTER.png
Recipes 
 
May 2011
Little Elm, TX
Posts: 131
Liked 17 Times on 14 Posts



This is for a direct fired BIAB system. I know alot of people do eBIAB, however I don't have access to 220v. I would go for a full on single tier brew system, however I don't have the space to store one. I would however like to integrate some automation to maintain mash temps.

I drew up two setups that I believe would work one using a MYPIN TA4-RNR and one for the MYPIN TD4-SNR. The TA4 I chose would allow me in the future to basically duplicate the setup and go full gas automation. The TD4 would allow me to go electric in the future with a completely different wiring diagram as it has a manual setting.
Click image for larger version

Name:	TA4_RNR_DIAGRAM.jpg
Views:	792
Size:	30.9 KB
ID:	169510   Click image for larger version

Name:	TD4_SNR_DIAGRAM.jpg
Views:	427
Size:	30.5 KB
ID:	169511  

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wiring Diagram for a HERMS system scottstribling Electric Brewing 17 12-03-2012 04:48 PM
BrewTroller for direct fired decoction 2-vessel system gum Equipment/Sanitation 3 06-18-2012 08:01 PM
Direct Fired MLT ziggy13 Equipment/Sanitation 17 03-26-2012 02:34 AM
$50, 50L direct-fired MLT TheBeerNerd Kettles, Mash Tuns & Hot Liquor Tanks 12 01-21-2012 06:44 PM
Low Pressure Ignition system wiring diagram kladue Equipment/Sanitation 1 12-27-2009 10:31 PM


Forum Jump