Importance of Thermometor Calibration - Home Brew Forums
Home Brew Forums > Home Brewing Beer > General Techniques > Importance of Thermometor Calibration

Reply
 
Thread Tools
Old 11-16-2007, 04:59 PM   #1
Reverend JC
2500 gallons year to date
HBT_LIFETIMESUPPORTER.png
 
Reverend JC's Avatar
Recipes 
 
Jun 2006
Your Mom's
Posts: 1,880
Liked 3 Times on 3 Posts



When i first started AG brewing i would use a glass candy Thremometor for the strike, rest, and sparge water and a meat Thermometor for the mash. I would always get a really high strike, always miss my target termp and have to add cold water to get it to the proper temp.

Then i started just using the meat Thermometor and without even thinking about it i began hitting my temps and I thought, man i have this down!!!

At that point i started missing my normal Eff. of 75-82% range. I started getting into the 60 to 65% range. And i would always get my beers down to 1.010 or 1.09 and i would think, wow, uh, this is supposed to have some residual sweetness. oh well, goes down good.


My Eff. was suffering because my sparge temp was always around 164 and not hot enough to really loosen up those sugars and help get them into the wort. The beer was always dry because my supposed 152 temp was always around 146.

For eveyone who has not calibrated your thermometors i suggest you do so, it is the easiest thing to ensure a constant factor to rely on in the brewing process. None of my beers were bad, they just were not as good as they could have been.


__________________
"Just because i don't care dosen't mean I don't understand." -Homer Simpson


http://www.modernmonks.com

 
Reply With Quote
Old 11-16-2007, 06:10 PM   #2
Uncle Argyle
 
Uncle Argyle's Avatar
Recipes 
 
Mar 2006
Westminster, MA.
Posts: 162

I am having an issue getting my mash and sparge temps right and I want to invest in a decent thermometer. I am also currently using a candy thermometer and a turkey fryer thermometer for the mash. both of which you can't calibrate really...just adjust to boiling water.

what do you use for a thermometer or what would you recommend? (I use a 5 Gal cooler MLT...if that changes a recommendation).

Thanks,

Uncle Argyle


__________________
Old Iron Beerworks

 
Reply With Quote
Old 11-16-2007, 06:35 PM   #3
Reverend JC
2500 gallons year to date
HBT_LIFETIMESUPPORTER.png
 
Reverend JC's Avatar
Recipes 
 
Jun 2006
Your Mom's
Posts: 1,880
Liked 3 Times on 3 Posts


They make bewing thermometors that are inexpensive and will do the trick but those too need calibrated when purchased.
__________________
"Just because i don't care dosen't mean I don't understand." -Homer Simpson


http://www.modernmonks.com

 
Reply With Quote
Old 11-16-2007, 06:57 PM   #4
Joker
 
Joker's Avatar
Recipes 
 
Nov 2007
Orygun
Posts: 1,953
Liked 32 Times on 29 Posts


Is there a debate between digital and analog thermometers? Anyone have strong feelings one way or the other. Currently I use an analog but have been thinking about going digital but not sure if its worth it or not.

 
Reply With Quote
Old 11-16-2007, 07:08 PM   #5
Drunkensatyr
 
Drunkensatyr's Avatar
Recipes 
 
Apr 2007
Posts: 1,997
Liked 17 Times on 13 Posts


I use both. I calibrate the analog to ice water and to boiling water. Then I check the analog against the digital. I never rely on only one thermometer.

 
Reply With Quote
Old 11-16-2007, 09:44 PM   #6
toddq
Recipes 
 
Jun 2007
Bellingham, WA
Posts: 10

I finally figured out the other day I've been having the same problem, but in the other direction. My last two batches have refused to ferment lower than 1.028, and after checking my thermometer, it appears I've been unintentionally mashing in the 162-167 degree range, leaving lots of unfermentable sugars. After getting rid of this one, I will be joining the two thermometer club. The odd thing is, it used to be reasonably accurate, and now it's waaaaay off.

 
Reply With Quote
Old 11-16-2007, 11:50 PM   #7
Sea
Green Flash IPA on tap
HBT_LIFETIMESUPPORTER.png
 
Sea's Avatar
Recipes 
 
May 2007
Southern Oregon
Posts: 1,477
Liked 6 Times on 6 Posts


Google "Traceable Thermometer." Lots of Brewers on this board have one, I love mine.
__________________
I plan on living forever. So far, so good! - unknown.


Corrupt Brewers

 
Reply With Quote
Old 12-17-2007, 02:54 AM   #8
Gammon N Beer
Recipes 
 
Dec 2007
WI
Posts: 714
Liked 10 Times on 10 Posts


I have very, very little experience with thermometers.....Yet,....

I do know the importance of accuracy in brewing. I have one analog thermometer with about a 6 inch probe. I would like to pick up a cheap digital to check my mash tun temps with.

Can digital thermometers be calibrated to ice water & boiling water?

Any suggestions on a cheap digital?

 
Reply With Quote
Old 12-17-2007, 03:04 AM   #9
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,146
Liked 1622 Times on 1050 Posts


Target has a yellow one on their website that is waterproof and calabratable for only $15. I bought two.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 12-17-2007, 04:18 AM   #10
derogg
Recipes 
 
Dec 2006
Aliso Viejo, Ca
Posts: 159
Liked 1 Times on 1 Posts


VWR or Control Compay have a good water proof digital thermo. You can get a lollipop style or a remote probe. Both are certified and traceable. I think they have two different grade of accuracy. I have a lollipop style, got it for about $28.00 shipped. Good customer service. I busted the battery cover, sent an e-mail, and had a new cover sent in a week, no charge. - Dirk


__________________
Bier frisch und gut, schafft frohen Mut.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Broken floating Thermometor brewmaster48 Equipment/Sanitation 13 10-31-2010 07:51 PM
refractometer calibration polecreek Equipment/Sanitation 2 02-24-2009 03:15 AM
Equipment Calibration WeHeavy General Beer Discussion 3 11-05-2008 05:14 AM
Cooler MLT calibration slim chillingsworth Equipment/Sanitation 3 04-09-2008 08:45 PM
Thermometer calibration help derogg Equipment/Sanitation 4 09-30-2007 08:35 PM


Forum Jump