Could I use this burner on NG? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Could I use this burner on NG?
Cool Brewing Corny 5G & Mini Giveaway

Reply
 
Thread Tools
Old 12-03-2013, 04:00 PM   #1
MNSmitty
Recipes 
 
Join Date: Dec 2011
Location: Mound, MN
Posts: 183
Liked 29 Times on 25 Posts
Likes Given: 20


This one.

http://www.bayouclassicdepot.com/618...jet-burner.htm

I'd like to run NG on my build, and I was wondering if this is NG capable. It says it will run off low pressure, but not sure about tip sizes with NG. (if that even matters)

I dont know a lot about tip burners.

Hope this is in the right section, burners are equipment, right?



 
Reply With Quote
Old 12-03-2013, 05:59 PM   #2
day_trippr
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 16,173
Liked 2583 Times on 1958 Posts


I don't see where that page says that burner will run on natural gas.

In any case, you'd have to replace all 10 tips to switch it from the propane it's clearly set up for to low pressure gas...

Cheers!



 
Reply With Quote
Old 12-03-2013, 07:08 PM   #3
FourSeasonAngler
HBT_LIFETIMESUPPORTER.png
 
FourSeasonAngler's Avatar
Recipes 
 
Join Date: Oct 2012
Location: Oswego, IL
Posts: 469
Liked 78 Times on 48 Posts
Likes Given: 246


I have one of these 23 tip jet burners.

http://www.ebay.com/bhp/natural-gas-jet-burner

I'm running on house pressure natural gas and the flame is substantial. I can bring 20 gallons of hot wort from mash temps to a full rolling boil in 35 to 45 minutes.

If you do some research you can find the 23 tip burners for less than $25.
__________________
Why is the home brew always gone?

 
Reply With Quote
Old 12-04-2013, 04:26 AM   #4
dcbc
Recipes 
 
Join Date: Feb 2012
Location: Tyler, TX
Posts: 324
Liked 24 Times on 21 Posts
Likes Given: 19


You can if you switch the tips. You can get them on ebay (10 for $20).
__________________
Brew Stands Gallery

 
Reply With Quote
Old 12-04-2013, 07:23 AM   #5
greyghost
Recipes 
 
Join Date: Dec 2011
Location: Woodinville, WA
Posts: 129
Liked 15 Times on 13 Posts
Likes Given: 2


Go here for the NG burner http://www.bayouclassicdepot.com/nat...et-burners.htm I use this burner and it works great. And it's a penney cheaper

 
Reply With Quote
Old 12-04-2013, 03:58 PM   #6
MNSmitty
Recipes 
 
Join Date: Dec 2011
Location: Mound, MN
Posts: 183
Liked 29 Times on 25 Posts
Likes Given: 20


Ha!
Thanks greyghost!

I guess I didnt dig deep enough into the site to find the NG burners.

Would a 10 tip on NG be enough burner to work with a keggle? Or should I be looking for a 23 tip?

 
Reply With Quote
Old 12-05-2013, 01:08 AM   #7
greyghost
Recipes 
 
Join Date: Dec 2011
Location: Woodinville, WA
Posts: 129
Liked 15 Times on 13 Posts
Likes Given: 2


Get the 10 tip. It works great on my keggle turned the bottom ring on my keggle blue. It dose get hot I can't imagine using a 23 tip.

 
Reply With Quote
Old 12-05-2013, 03:22 PM   #8
MNSmitty
Recipes 
 
Join Date: Dec 2011
Location: Mound, MN
Posts: 183
Liked 29 Times on 25 Posts
Likes Given: 20


Sounds like a plan. Thanks for the help

 
Reply With Quote
Old 12-12-2013, 02:18 PM   #9
FourSeasonAngler
HBT_LIFETIMESUPPORTER.png
 
FourSeasonAngler's Avatar
Recipes 
 
Join Date: Oct 2012
Location: Oswego, IL
Posts: 469
Liked 78 Times on 48 Posts
Likes Given: 246


Yea my boil kettle is a 30 gallon stainless pot. I typically boil 20+ gallons so the 10 tip seemed a bit under-qualified for the job.

A 10 tip on a keggle should do just fine.


__________________
Why is the home brew always gone?

 
Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
BAYOU BURNER Kick A Banjo Burner Plus KAB6 BMWMK2 For Sale 1 09-06-2012 05:00 AM
Company selling banjo burner stand w/out burner? GNBrews Equipment/Sanitation 9 06-25-2012 05:04 PM
Conversion from Turkey Fryer burner to Banjo Burner brewfeller Equipment/Sanitation 1 07-31-2011 11:25 AM
Does a Natural gas burner pose the same problems a Propane burner poses? Endovelico Equipment/Sanitation 15 01-28-2011 05:48 PM
Help Me Understand the Process (2 burner setup BK & HLT, MLT insulated no burner) mplutodh1 Equipment/Sanitation 14 11-09-2009 01:00 PM


Forum Jump