Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > IPA in primary- did I add too many hops?
Reply
 
Thread Tools
Old 11-28-2013, 07:05 AM   #1
FoggBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2013
Location: Allston, Massachusetts
Posts: 23
Likes Given: 12

Default IPA in primary- did I add too many hops?

My instincts say "Too many hops? Never!"

I've been brewing one gallon batches and for this IPA I tossed in one ounce of Cascade and about a half ounce of Saaz.

60' - .25 oz Cascade
45' - .25 oz Cascade
30' - .25 oz Cascade
10' - .25 oz Saaz
5' - .25 oz Saaz
0' - .25 oz Cascade

At 0' I also added about a quarter cup of honey (last minute idea, would it have made a difference if I tossed it in any sooner?) The beer wound up being about a quart shy of a gallon, so I added two cups of water (is this "top-up water?" Still getting used to the jargon). In the past I have added too much water, effectively degrading the mouth feel of the final product, so I didn't want to add too much. I suppose another question I have would be if I should have added any water at all! I don't want to sacrifice quality for quantity.

ANYWHO.

I feel like I should've extended the boil to ninety minutes instead of my usual sixty. According to Brewtoad's calculator, I should be coming out right around 50 IBUs and 7% ABV which are favorable in my opinion, and the wort was a nice dark golden color upon the start of the boil.

The beer does look awfully green right now, however. Should this be expected? I assume it will all settle into trub. I've made a couple IPAs before, but never with this amount of hops, so I'm curious.


FoggBrew is offline
 
Reply With Quote
Old 11-28-2013, 07:39 AM   #2
brettg20
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2009
Location: Newport Beach, CA
Posts: 808
Liked 112 Times on 75 Posts
Likes Given: 7

Default

It won't be too many, the floral aroma of the Cascade will over power the Saaz.

I wouldn't use Saaz in your next IPA, it is more of a Pilsner / Lager hop...just my $.02


brettg20 is offline
Johnnyhitch1 Likes This 
Reply With Quote
Old 11-28-2013, 01:53 PM   #3
hellawaits77
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2013
Posts: 147
Liked 10 Times on 10 Posts
Likes Given: 24

Default

That's not too many at all. But like the above poster said, I wouldn't use Saaz in an IPA, especially with a strong hop like Cascade. Heck, do an all Cascade IPA, or maybe with just a small amount of Magnum or Warrior for bittering. Maybe something like this:

60' - .25 oz Magnum
30' - .25 oz Cascade
15' - .25 oz Cascade
5' - .50 oz Cascade
0' - .25 oz Cascade

It's generally better to use flavor/aroma hops like Cascade later in the boil. Also, I'd do a full boil with a batch this small. Or if you're using just extract, all batches.

A quarter cup of honey certainly wouldn't be a bad thing post boil, but be sure to calculate that into your ABV. I actually just added 12 oz of honey to my American Strong Ale to boost the ABV. We'll see how it turns out.

Hope this helped.
__________________
Aging: Blunt Force Trauma (American Strong Ale)
On Deck: Squeak Says "Better Citra Ass Down"!! (Citra DIPA)
hellawaits77 is offline
 
Reply With Quote
Old 11-28-2013, 02:31 PM   #4
BradTheGeek
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2013
Posts: 151
Liked 7 Times on 7 Posts
Likes Given: 9

Default

Looks good to me, but I am a hop fiend. I do not know much about Saaz, but isn't more of a low AA pilsner type hop? For my IPA I like piney, citrusy flavors, so I go heavy on the Citra and Simcoe. Just make sure you dry hop some too, to get the flavor and aroma and not just the bitter.
__________________
Primary: Empty
Secondary: Empty
Bottled/kegged: Agave Wheat Ale, Blackberry Skeeter Pee, Candied Bacon Cream Stout
Plans: ESB
BradTheGeek is offline
 
Reply With Quote
Old 12-09-2013, 04:47 PM   #5
FoggBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2013
Location: Allston, Massachusetts
Posts: 23
Likes Given: 12

Default

Thanks for the advice! I wasn't sure about the Saaz, I had a half ounce left over from a pumpkin blonde I have and wanted to use it up rather than let it sit in the fridge any longer.

I've been brewing all-grain, I enjoy the mash and sparge aspects of brewing as opposed to dealing with extracts. I think it's the junior chemist in me. I appreciate the replies and thanks for the good vibes!
FoggBrew is offline
 
Reply With Quote
Old 12-09-2013, 04:49 PM   #6
FoggBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2013
Location: Allston, Massachusetts
Posts: 23
Likes Given: 12

Default

Quote:
Originally Posted by hellawaits77 View Post
Also, I'd do a full boil with a batch this small. Or if you're using just extract, all batches.
What exactly do you mean when you say "full boil?"
FoggBrew is offline
 
Reply With Quote
Old 12-09-2013, 06:49 PM   #7
hellawaits77
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2013
Posts: 147
Liked 10 Times on 10 Posts
Likes Given: 24

Default

Quote:
Originally Posted by FoggBrew

What exactly do you mean when you say "full boil?"
I mean boiling all the water. Don't add any to the wort after, simply boil it all. Be sure to add a few oz extra to compensate for boil off.
__________________
Aging: Blunt Force Trauma (American Strong Ale)
On Deck: Squeak Says "Better Citra Ass Down"!! (Citra DIPA)
hellawaits77 is offline
 
Reply With Quote
Old 12-09-2013, 07:18 PM   #8
FuzzeWuzze
DIY King
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
FuzzeWuzze's Avatar
Recipes 
 
Join Date: Jun 2012
Location: Newberg, Oregon
Posts: 2,488
Liked 289 Times on 216 Posts
Likes Given: 31

Default

To me that almost doesnt seem like ENOUGH hops for an IPA, seems more APA...?

You have all low alpha bittering hops, no matter how long you boil cascade its not going to compete with something like Centennial or Magnum for bittering.

Just checked and at 5.5% AA Cascades your only looking at 26-27 IBU, which will be a bit low on the bittering but should still come out tasty!
FuzzeWuzze is offline
 
Reply With Quote
Old 12-13-2013, 07:03 PM   #9
FoggBrew
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2013
Location: Allston, Massachusetts
Posts: 23
Likes Given: 12

Default

I didn't wanna overload on hops necessarily. I'm a hop head for sure, but I'm looking at getting a good session IPA under my belt, so this is some good news to hear. I'm excited for the turnout. It's been a few months since my last IPA home brew.
FoggBrew is offline
 
Reply With Quote
Old 12-13-2013, 07:56 PM   #10
chickypad
lupulin shift victim
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
chickypad's Avatar
Recipes 
 
Join Date: Jul 2010
Location: SF Peninsula
Posts: 4,043
Liked 585 Times on 485 Posts
Likes Given: 242

Default

Quote:
Originally Posted by FuzzeWuzze View Post
To me that almost doesnt seem like ENOUGH hops for an IPA, seems more APA...?

You have all low alpha bittering hops, no matter how long you boil cascade its not going to compete with something like Centennial or Magnum for bittering.

Just checked and at 5.5% AA Cascades your only looking at 26-27 IBU, which will be a bit low on the bittering but should still come out tasty!
Did you see this is a 1 gallon batch?
OP, if your cascade was about 4.5% I think your calculations are probably right at around 50 IBU. Are you going to dry hop?


chickypad is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Using pellet hops or loose leaf hops for dry hopping in primary? msa8967 General Beer Discussion 25 03-28-2014 06:51 PM
Primary with hops? BostonianBrewer Fermentation & Yeast 9 05-10-2013 05:54 AM
How do I dry hops to my primary??? gtnutz Beginners Beer Brewing Forum 13 02-24-2012 09:15 PM
Hops in the primary Svenhook Beginners Beer Brewing Forum 11 11-22-2011 10:50 PM
Hops in Hef primary? Pez Extract Brewing 3 04-22-2008 12:02 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS