Vigorous First Night - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > Vigorous First Night

Reply
 
Thread Tools
Old 11-05-2013, 03:27 PM   #1
Hebrews
Recipes 
 
Sep 2010
Rocklin Ca, California
Posts: 79
Liked 1 Times on 1 Posts



So I brewed my first batch in more than a year last night. I promised my self I wouldn't brew another batch until I had a large, proper brew kettle. My wife got me a 20 gallon boilermaker pot for our anniversary so I brewed last night.

I did a porter for Christmas. The SG read out at 1.070 after a 60 minute boil. I did do steeping grains for 30 minutes prior to adding my extract. I used my new wort chiller to bring the temp down to 70 degrees then pitched to vials of WLP004 Irish ale yeast. (Per MrMalty)

Everything went well, and I was excited to get back into this.

But after the first night of fermentation I checked on it to find a mess. It blew the air lock right out of the carboy. Now, I think I'm still in good shape. If I'm not mistaken, the krausen should act like an airlock its self. I believe that's how Anchor Steam still ferments, with open tanks and krausen fermentations.

What I'm hoping to find out is if i'm correct. Am I still in good shape, or is this batch a waste?









So I put the stopper and air lock back in, so I knew it'd be a smaller hole and better chance of a seal.


here's a video of how fast the krausen is leaving the air lock




thanks in advance.

Micah.

 
Reply With Quote
Old 11-05-2013, 03:36 PM   #2
iowabrew
Recipes 
 
Jul 2011
Ames, Iowa
Posts: 541
Liked 40 Times on 36 Posts


The beer should be completely fine, you are correct in that the escaping CO2 will protect the beer inside. I'd get a blow off tube on that thing right away tho, and consider using when next time for 24hrs or so. Search blowoff tube if you need to on here, tons of info.

 
Reply With Quote
Old 11-05-2013, 03:42 PM   #3
Hebrews
Recipes 
 
Sep 2010
Rocklin Ca, California
Posts: 79
Liked 1 Times on 1 Posts


I know about blow off tubes from How to Brew. I just never needed one before. I'll go home and set one up on my lunch. should be fine till noon i'd bet. it's still going crazy.

thanks for the info. I'm glad I asked to be sure.

 
Reply With Quote
Old 11-05-2013, 03:43 PM   #4
IslandLizard
Progressive Brewing
HBT_LIFETIMESUPPORTER.png
 
IslandLizard's Avatar
Recipes 
 
Jan 2013
Pasadena, MD
Posts: 6,362
Liked 1062 Times on 908 Posts


Cool pix!
If you haven't done so already, cut that star-shaped bottom off the airlocks, opening that pipe.

What do you have in mind for temperature control?

 
Reply With Quote
Old 11-05-2013, 03:43 PM   #5
BadNewsBrewery
 
BadNewsBrewery's Avatar
Recipes 
 
Oct 2012
Severn, MD
Posts: 1,248
Liked 129 Times on 103 Posts


You'll probably come out OK. Find a section of hose and run it from the middle tube on the blow off valve into a bucket that you can fill with some sanitizer. Then you can safely blow-off the excess krausen and CO2, without a concern of things contaminating your beer. I'd guess that as long as it's pumping krausen out at that rate, there's little to no concern about contamination. My fear would be when the fermentation dies down a little and the krausen layer settles, you no longer have anything to keep stray yeast and bacteria from finding their way into the carboy.

Good luck, and let us know how it turns out! Welcome back to brewing!
-Kevin
__________________
Building a Bad News Brewery - eHERMS

2014 - 70gal
2015 - 72gal

 
Reply With Quote
Old 11-05-2013, 03:52 PM   #6
sweetcell
HBT_SUPPORTER.png
 
sweetcell's Avatar
Recipes 
 
Jan 2012
Rockville, MD
Posts: 5,064
Liked 940 Times on 686 Posts


to avoid this happening next time, leave more headspace in the carboy. you filled this one too high. so make a slightly smaller batch, or use a larger fermentation vessel.

if your homebrewshop carries them, a 1" tube fits perfectly in a carboy opening. no need for messing with air locks. see the third pic here: http://www.homebrewtalk.com/f14/i-ne...ml#post3733394
__________________
What hops should I grow? Looking for cheap honey?
- Drinking: NHCPA (BPA and APA made with ingredients from Baltimore), 2 blends of a rye sour: ECY20 + ECY34, local sour cherry kriek #2, brett'ed Belgian blond on raspberries
- Aging: sour blond on second-use cherries, English Barleywine (half on brett), 3726 saison w/ brett x2 (dregs mix & Lochristi), GNO 3724 saison w/ brett mix, sour cherry mead, acerglyn, and a few other sours...

 
Reply With Quote
Old 11-05-2013, 03:54 PM   #7
Hebrews
Recipes 
 
Sep 2010
Rocklin Ca, California
Posts: 79
Liked 1 Times on 1 Posts


thanks guys....

As for temp control for this batch, that bathtub stays between 65 -72 this time of year. I've been watching it for a couple weeks. For the future, i'm working on getting a spare fridge and controller for fermentation and kegging. that's down the road a bit though.

i'll be checking that carboy regularly. as soon as the fermentation dies enough that I can put the air lock back together i'll do so.

 
Reply With Quote
Old 11-05-2013, 03:55 PM   #8
Hebrews
Recipes 
 
Sep 2010
Rocklin Ca, California
Posts: 79
Liked 1 Times on 1 Posts


I'll head over and see if they have that 1" tube. Seams like the way to go now that i'm looking at your pics. Thanks.

 
Reply With Quote
Old 11-05-2013, 04:04 PM   #9
flars
HBT_SUPPORTER.png
Recipes 
 
May 2011
Medford, WI
Posts: 6,828
Liked 1134 Times on 944 Posts


Quote:
Originally Posted by Hebrews View Post
thanks guys....

As for temp control for this batch, that bathtub stays between 65 -72 this time of year. I've been watching it for a couple weeks. For the future, i'm working on getting a spare fridge and controller for fermentation and kegging. that's down the road a bit though.

i'll be checking that carboy regularly. as soon as the fermentation dies enough that I can put the air lock back together i'll do so.

Ferementing yeast produce heat Some yeasts a lot of heat. Wort temperature can rise 5 to 10. If you would have had the bathtub full of cold water the blow off may not have happened. Fermentation would have been slower and the krausen wouldn't have risen as high and as fast. Rest of the family may not care for the bathtub being out of use for several days though.

A swamp cooler in the corner of the bathroom can be worked around. A tub or deep tray filled with water, cotton towel that stays wet around the fermentor, and a fan blowing on it. Swamp cooler set up like this can lower the wort temperature about 8.

 
Reply With Quote
Old 11-05-2013, 04:09 PM   #10
Hebrews
Recipes 
 
Sep 2010
Rocklin Ca, California
Posts: 79
Liked 1 Times on 1 Posts


its only my wife and I for now, so the bathtub isn't an in convenience. (2 bath house). I started on a Mr Beer, so every batch gets a little better. From Mr. Beer, to 5 gallon batch on a kit, then full boil rather than concentrated, then a properly cooled wort, not 1 hour ice bath. Next time Temp Control will be done. Need that fridge and controller though. I'd like a full stand up fridge that I can put taps on and what not. i'll have to go online and see what other's have done.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
How Vigorous is/was your Safbrew WB-06? tupton Fermentation & Yeast 0 04-09-2013 07:50 PM
Yeast starter made Fri night, pitch Sat night? storytyme Fermentation & Yeast 5 03-15-2013 03:30 AM
It's a Wednesday night brew night Moose777 All Grain & Partial Mash Brewing 3 05-07-2010 02:43 AM
Vigorous ferementation--not so vigorous Wino24 Fermentation & Yeast 2 11-04-2009 09:37 PM
A Dark night, a fell night, a brew night Truble Drunken Ramblings and Mindless Mumbling 4 02-08-2006 01:44 AM


Forum Jump