Finally upgrading to ball valve on bk - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Finally upgrading to ball valve on bk

Reply
 
Thread Tools
Old 11-01-2013, 04:35 AM   #1
Chupidacabra
Recipes 
 
May 2013
Posts: 383
Liked 26 Times on 20 Posts



I think I'm going with the weldless kit from bargain fittings. I was thinking 2 piece ball valve with hose barb to 90 degree elbow and 45 degree side pick up tube.

My 17 gallon bk has pretty thick walls so I'm going with the premium kit.

Am I missing anything? Or is there any advice for this? Just covering my bases before I pull the trigger.

Also, how far up open the kettle to you drill?

 
Reply With Quote
Old 11-01-2013, 04:39 AM   #2
Chupidacabra
Recipes 
 
May 2013
Posts: 383
Liked 26 Times on 20 Posts


Up on the kettle. I hate autocorrect sometimes.

 
Reply With Quote
Old 11-01-2013, 11:12 AM   #3
bja
Recipes 
 
Nov 2007
Pittsburgh
Posts: 2,058
Liked 167 Times on 125 Posts


Spend a couple dollars more and get the 3 piece ball valve.
__________________
____________________________________________

I know it just wouldn't be right to kill all the stupid people that we meet, but do you think it would be appropriate to just remove all of the warning labels and let nature take its course?

 
Reply With Quote
Old 11-01-2013, 11:34 AM   #4
LandoLincoln
HBT_SUPPORTER.png
 
LandoLincoln's Avatar
Recipes 
 
Feb 2011
Joliet, IL
Posts: 2,991
Liked 1114 Times on 587 Posts


I do like the 3-pieces better than the 2-pieces, but either one will get the job done.

I'm not sure why you'd need both a 90-degree elbow and a 45-degree side pick-up tube.
__________________
www.jolietbrewersguild.org

 
Reply With Quote
Old 11-01-2013, 02:59 PM   #5
Chupidacabra
Recipes 
 
May 2013
Posts: 383
Liked 26 Times on 20 Posts


Quote:
Originally Posted by LandoLincoln
I do like the 3-pieces better than the 2-pieces, but either one will get the job done.

I'm not sure why you'd need both a 90-degree elbow and a 45-degree side pick-up tube.
Just easier to clean? I may do that if that's the case. And on their site it says to get the 45 elbow or the 90 elbow if you do a side pick up either elbow is free with the kit so I figured grab the one that will end up closest to the side. I usually whirlpool and the thought was farther to the edge would be the least trub. Correct me if I'm wrong though.

 
Reply With Quote
Old 11-01-2013, 03:25 PM   #6
jsguitar
HBT_SUPPORTER.png
 
jsguitar's Avatar
Recipes 
 
May 2011
Overland Park, KS
Posts: 1,185
Liked 126 Times on 99 Posts


re: the ball valve, the two piece are actually pretty easy to take apart. I've accidentally done it when messing with fittings. It was all clean in there though so I never break them down.

 
Reply With Quote
Old 11-01-2013, 04:49 PM   #7
groundchuck
Recipes 
 
Apr 2013
Grand Haven, Michigan
Posts: 86
Liked 28 Times on 16 Posts


I just bought the set up you are talking about from BargainFittings a couple weeks ago. We used it last weekend and it worked awesome.

On the inside of the keggle is a 90 degree street elbow that points downward. This leaves about 3/4 of a gallon in the bottom of the keggle. That doesn't seem like too much left over to me so I am fine with it for now.
Click image for larger version

Name:	KeggleValve.jpg
Views:	234
Size:	37.5 KB
ID:	157486  

 
Reply With Quote
Old 11-02-2013, 01:14 AM   #8
Chupidacabra
Recipes 
 
May 2013
Posts: 383
Liked 26 Times on 20 Posts


Probably going to pull this trigger on this.

 
Reply With Quote
Old 11-02-2013, 01:21 AM   #9
Epimetheus
Recipes 
 
Oct 2012
Amherst, MA
Posts: 793
Liked 98 Times on 82 Posts


A ball valve on the bk is happy making. Like groundchuck, I use a 90deg elbow down into the flat-bottom pot and it leaves only 8 oz behind. 'O course, that low it picks up a good amount of crud. Tradeoffs.

I got 2-piece valve for economy. If you can, get the 3-piece. I pulled apart both in the store and IMO the 3-piece cleans more surely.
__________________
Whether beer is made in waders or in a toilet tank, as long as it is fun and the brewer likes how it tastes, who cares how it is brewed?
- VladOfTrub

Add your water analysis to the water report map! Instructions on this thread

 
Reply With Quote
Old 11-02-2013, 02:52 AM   #10
Chupidacabra
Recipes 
 
May 2013
Posts: 383
Liked 26 Times on 20 Posts


I'll probably go 3 piece. Also I think I am going to get the pick up tube, based on what you guys are saying. I don't like leavin beer behind and I like to whirlpool so I can leave the majority of the trub.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Upgrading Bleeder Valve Troubles gradoa Equipment/Sanitation 0 03-29-2012 03:34 PM
Propane valve - use ball valve ? adam01 Equipment/Sanitation 2 05-23-2011 09:46 PM
Ball valve vs. Gate valve for MLT, have question JRems Equipment/Sanitation 4 04-11-2011 01:40 AM
Opinions On Ball Valve, Gate Valve, Or Globe Valve For March Pumps jcav Brew Stands 13 10-16-2010 03:56 AM


Forum Jump