Single tier build photo - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Single tier build photo

Reply
 
Thread Tools
Old 11-04-2007, 11:44 PM   #1
Onescalerguy
Recipes 
 
Sep 2006
Craig,Alaska
Posts: 453
Liked 15 Times on 6 Posts



Weekend project.Burner legs are counter-sunk into the base.Pump,QDs,spigots,on the way.All said and done cost=800.00$.[IMG][/IMG]
[IMG][/IMG]
Cheers
Platform 20"x72"


 
Reply With Quote
Old 11-05-2007, 04:51 AM   #2
foppa78
 
foppa78's Avatar
Recipes 
 
Apr 2007
Kansas City
Posts: 313
Liked 2 Times on 2 Posts


Not a bad weekend project. Looks great! Nice work.

 
Reply With Quote
Old 11-05-2007, 05:28 AM   #3
adam2
Recipes 
 
Jun 2007
Posts: 16

What kind of pump are you using?

 
Reply With Quote
Old 11-05-2007, 04:29 PM   #4
Onescalerguy
Recipes 
 
Sep 2006
Craig,Alaska
Posts: 453
Liked 15 Times on 6 Posts


Ordered a March pump and quick-disconnect hose fittings.
Cheers

 
Reply With Quote
Old 11-05-2007, 06:18 PM   #5
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,245
Liked 1695 Times on 1089 Posts


You're gonna need a heat shield on the sides of that middle shelf or you'll singe it.
__________________
Welcome to BrewHardware.com. I love you.
Corny Keg Dry Hop Canisters $26.50 for limited time
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 11-05-2007, 06:35 PM   #6
Onescalerguy
Recipes 
 
Sep 2006
Craig,Alaska
Posts: 453
Liked 15 Times on 6 Posts


Bobby M,i was wondering about that too.I might need to shorten the table length.We didn't really plan it out very well.We hope to have the rest of it together by next weekend and try a brew.
Here's another shot with SWMBOs better camera.
[IMG][/IMG]
[IMG][/IMG]
Cheers

 
Reply With Quote
Old 11-05-2007, 06:39 PM   #7
Orfy
For the love of beer!
HBT_LIFETIMESUPPORTER.png
 
Orfy's Avatar
Recipes 
 
Sep 2005
Cheshire, England
Posts: 11,732
Liked 94 Times on 62 Posts


I think I'd want a raised edge around it to stop the possibility of the legs slipping over the edge if they get knocked.
__________________
GET THE GOBLIN
Have a beer on me.

 
Reply With Quote
Old 11-05-2007, 06:43 PM   #8
Onescalerguy
Recipes 
 
Sep 2006
Craig,Alaska
Posts: 453
Liked 15 Times on 6 Posts


The legs are sunk 1 inch into wood.Very firm with no wobble.
Cheers

 
Reply With Quote
Old 11-05-2007, 06:48 PM   #9
Orfy
For the love of beer!
HBT_LIFETIMESUPPORTER.png
 
Orfy's Avatar
Recipes 
 
Sep 2005
Cheshire, England
Posts: 11,732
Liked 94 Times on 62 Posts


Good idea.
__________________
GET THE GOBLIN
Have a beer on me.

 
Reply With Quote
Old 11-07-2007, 03:31 AM   #10
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,245
Liked 1695 Times on 1089 Posts


Any old scrap sheet metal will work as a heat shield. Just figure out a way to sit off the wood by a 1/4" or so. You can test what I'm saying by just cranking one of those burners for 10 minutes. That wood is gonna be smokin.
__________________
Welcome to BrewHardware.com. I love you.
Corny Keg Dry Hop Canisters $26.50 for limited time
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
One Barrel Single Tier System Build sleepystevenson Equipment/Sanitation 18 12-28-2010 04:45 PM
The single tier build. Paraops Brew Stands 27 03-25-2009 06:44 PM
New single tier build near completion ddknight Brew Stands 11 02-27-2009 07:54 PM
Possible stand for single tier build available at Costco? TerapinChef Equipment/Sanitation 7 10-02-2008 08:24 PM


Forum Jump