How tight for the top of quick disconnects - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > How tight for the top of quick disconnects

Thread Tools
Old 10-08-2013, 03:59 AM   #1
Aug 2012
Appleton, WI
Posts: 232
Liked 3 Times on 3 Posts

How much should I be tightening the top screw piece of the ball lock quick disconnects (the plastic piece above the spring that you turn with a flat head) I tightened one too much and it destroyed the threads. Are these just supposed to be flush with the top or what?

Reply With Quote
Old 10-08-2013, 04:05 AM   #2
May 2011
Stow, MA
Posts: 18,891
Liked 3379 Times on 2516 Posts

I just cleaned a QD this afternoon, and tightened the cap 'til it stopped...


Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
S.S. Quick Disconnects Erbe Equipment/Sanitation 4 08-01-2013 02:55 AM
Stainless Quick Disconnects - Too tight? pfgonzo Equipment/Sanitation 1 04-07-2013 09:20 PM
Which quick disconnects to get? BigPatBrewer Brew Stands 18 02-29-2012 05:06 AM
quick(ish) disconnects jbbeer Equipment/Sanitation 9 02-19-2010 02:53 AM
Quick Disconnects RockfordWhite Brew Stands 3 01-07-2008 07:19 PM

Forum Jump