Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Electric Brewing > Heating element hole size
Reply
 
Thread Tools
Old 09-25-2013, 11:24 PM   #1
shyanny
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2012
Posts: 35
Liked 6 Times on 4 Posts
Likes Given: 2

Default Heating element hole size

I just wanted to clarify that the hole size for an electric heating element is 1 1/4 inches. The correct hole punch size for this element is the greenlee 1 1/4 inch radio chasis hole punch. The 1 1/4 inch conduit punch is too big. Ask me how I know.


shyanny is offline
 
Reply With Quote
Old 09-26-2013, 12:39 AM   #2
bullywee
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Greensboro NC
Posts: 187
Likes Given: 2

Default

Yes 1-1/4 radio, Just say NO To the conduit punch. I made the mistake
bullywee is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
How critical is the hole size for the element? Cioffi Electric Brewing 2 02-24-2013 03:24 AM
Sizing a Heating Element by Batch Size bellinmi88 Electric Brewing 4 01-08-2013 04:05 AM
heating element thread size wegz15 Electric Brewing 8 07-29-2011 10:39 PM
1.25" hole to small for Home Depot heating element...anyone have a quick fix? Ranger9913 Kettles, Mash Tuns, & Hot Liquor Tanks 6 02-22-2010 01:45 AM
Correct Size Hole Saw for Water Heater Element mZnthebend Kettles, Mash Tuns, & Hot Liquor Tanks 6 10-29-2008 09:24 PM


Forum Jump

Newest Threads