Bar top epoxy resin questions - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Bar top epoxy resin questions

Reply
 
Thread Tools
Old 09-10-2013, 03:07 PM   #1
SAINT1000
Recipes 
 
Sep 2013
Posts: 2


I am in the process of building a home bar. The top of the bar i want to inlay hockey sticks and pucks and cover with epoxy resin. My question is will the epoxy resin fill the gaps between the hockey pucks? A hockey puck is 1" thick so with a top layer the resin will have to be around 1 1/8" thick. Also what is the best resin to use that wont yellow? Thanks for any help.



 
Reply With Quote
Old 09-10-2013, 03:08 PM   #2
SAINT1000
Recipes 
 
Sep 2013
Posts: 2

sorry about the caps. forgot to turn off caps lock



 
Reply With Quote
Old 09-10-2013, 04:11 PM   #3
wit2003
Recipes 
 
Nov 2012
Posts: 65
Liked 6 Times on 5 Posts


if you put enough epoxy on, it will give you the thickness you need.....It wont be cheap though.

 
Reply With Quote
Old 09-10-2013, 04:24 PM   #4
chezhed
HBT_SUPPORTER.png
Recipes 
 
Dec 2010
Mission, TX
Posts: 675
Liked 61 Times on 55 Posts


Quote:
Originally Posted by wit2003 View Post
if you put enough epoxy on, it will give you the thickness you need.....It wont be cheap though.
Got that right!!! and it will take forever....you can't pour that much epoxy and expect it to cure properly at one time. You might consider putting a clear layer of lexan or glass on top of those things and then putting a layer of epoxy on it.....

This stuff ain't cheap but I promise you it won't deteriorate or discolor in any way....http://www.westsystem.com/ss/

I've used it with fiberglass on boats and it is tough stuff.
__________________
Green Bay Packers - 13 Time World Champions
______________________________________
Jygomundi Brews
www.rgvbrew.com

 
Reply With Quote
Old 09-10-2013, 08:06 PM   #5
raysmithtx
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Sep 2012
Fort Worth, Texas
Posts: 504
Liked 110 Times on 72 Posts


If you don't want it to yellow then you need to purchase 2 part epoxy with built in UV protection.

I use 2 part epoxy every day and use Environmental Technology's ex-74 epoxy (it has the UV protection built in).

There are 231 cubic inches in a gallon so you can estimate the amount needed that way. And the previous posts are correct, it will be expensive.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Resin-y IPA bjl110 Recipes/Ingredients 7 07-23-2012 07:52 PM
Building a bar - questions about protecting bar top - epoxy scrapplejoe Kegerators & Keezers 2 02-17-2011 03:21 PM
BPA-epoxy resin zelltj General Beer Discussion 2 10-16-2010 08:47 PM
Is this hop resin? jts15 Beginners Beer Brewing Forum 11 10-02-2008 10:18 AM


Forum Jump