The Correct Process - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Automated Brewing Forum > The Correct Process

Reply
 
Thread Tools
Old 09-10-2013, 02:57 AM   #1
ReuFroman
 
ReuFroman's Avatar
Recipes 
 
Oct 2011
Fort Collins, CO
Posts: 240
Liked 11 Times on 10 Posts



To make steps easier I did a diagram of the brew day process. Basically it's my setup in a quick reference chart that I made a while ago then updated it today. I went through it a few times to make sure I had it right. This will be the process I am going for when programing for automation.

I am going rims right now, since I have that already set up. I may go herms since I already welded the kettles for it and have it in also. But this will be for a later date.

Does this look correct to you? Did I miss something?
Larger sized version
http://rfimarketing.com/Ago5Fep/brewing-process.jpg
Click image for larger version

Name:	brewing-process.jpg
Views:	177
Size:	12.3 KB
ID:	147341  
__________________
--------------------
It's ok to stare at my kegs! Just don't touch them!

Reason: Stupid images not working

 
Reply With Quote
Old 09-10-2013, 11:03 PM   #2
ReuFroman
 
ReuFroman's Avatar
Recipes 
 
Oct 2011
Fort Collins, CO
Posts: 240
Liked 11 Times on 10 Posts


I was checking out JonW's set up http://forum.embeddedcc.com/viewtopic.php?f=16&t=342 which uses 3 pumps and 6 valves. I've been thinking about this all afternoon and finally had time to draw it out. What about this set up with 3 pumps, 2 3 way valves, and 4 check valves?
Larger Image: http://rfimarketing.com/Ago5Fep/brewing-process2.jpg

This should work right?
Click image for larger version

Name:	brewing-process2.jpg
Views:	168
Size:	36.7 KB
ID:	147445  
__________________
--------------------
It's ok to stare at my kegs! Just don't touch them!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Is My Brewing Process Correct? LiquidFlame Beginners Beer Brewing Forum 7 03-31-2012 03:15 PM
Let me see if I'm correct... ReverendVerse Cider Forum 3 11-05-2011 08:05 PM
Weizen & Low Efficiency - Process to Correct? Duster72 All Grain & Partial Mash Brewing 5 06-08-2010 02:34 AM
Is this Correct ?! hector Brew Science 1 04-05-2010 03:43 PM
Which is correct?? IndyPABrewGuy All Grain & Partial Mash Brewing 5 02-13-2008 02:41 PM


Forum Jump