Advice needed on building a Mash Tun - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Advice needed on building a Mash Tun

Reply
 
Thread Tools
Old 08-22-2013, 03:45 PM   #1
BonzoAPD
Recipes 
 
Sep 2012
Congers, NY
Posts: 354
Liked 6 Times on 6 Posts



Hey guys, I need some advice on building a Mash Tun. I have watched a bunch of videos on youtube on building mash tuns. Would love to get your input on what style you suggest. I have seen both water cooler styles as well as the rectangle style coolers used. Which do you find works best or is there no real difference?

If going the water cooler way, which is better, a braided intake or a false bottom?

What size is recommended for 5 gallon batches?

 
Reply With Quote
Old 08-22-2013, 03:58 PM   #2
DrunkleJon
Objects in mirror are closer than they appear
HBT_LIFETIMESUPPORTER.png
 
DrunkleJon's Avatar
Recipes 
 
Jan 2011
Alexandria, Virginia
Posts: 8,141
Liked 2512 Times on 1770 Posts


Well. First you take a Tun, then you mash the living daylights out of it...

Sorry. I am a little sleep deprived today. Both have their merits. I use a bazooka screen. They are stiffer than many of the braided hoses which can collapse under the weight of the mash. As for problems, they do get stuck sparges. False bottoms are great too, but at times can be annoying in that they can at times lift off the bottom or not form a great seal and as a result let grain through. You can use a 5 Gal drink cooler, though I got a 10 gallon and do not regret it as it compensates for higher gravity brews and I have made a 10 gallon batch on accident because I didnt realize I bought for it thinking it was a recipe for 5 gallons. You can also use a square cooler with braid/bazooka/manifold to great effect as well.

 
Reply With Quote
Old 08-22-2013, 04:30 PM   #3
twistr25
HBT_SUPPORTER.png
 
twistr25's Avatar
Recipes 
 
May 2012
Raleigh, NC
Posts: 1,440
Liked 117 Times on 110 Posts


5 gallon cooler is tight for 5 gallon batches, but I've made it work to great success. I have a braid and I also use a BIAB bag. Effectively a whole tun false bottom. Works everytime.
__________________
____________________
Primary: N/A
Bottled: N/A
Kegs: Tri-Peppered Saison and Sunset Orange Kolsch
Future:Something new, SMaSH perhaps?
2013 Previous: Sunrise Honey Rye Pale Ale, Dark Skies Black IPA, Sunset Orange Kolsch, All Hallow's Eve Pumpkin Ale, Raining Hops and Dogs IPA

Awards/Recognition
Dark Skies Black IPA - 2nd Place at a local comp. Score of 39 from a BJCP judge

Twistr25 Recipes

GT Keezer Build

 
Reply With Quote
Old 08-22-2013, 05:08 PM   #4
webby45wr
 
webby45wr's Avatar
Recipes 
 
May 2012
Mifflinburg, PA
Posts: 161
Liked 13 Times on 12 Posts


I went with a rectangular cooler because I had one laying around, so the price was right. I then built a manifold out of cpvc pipe. It works well and has a 13 gallon capacity, which is nice.

When I priced things out it seemed like rectangular coolers are cheaper than round water coolers, so that may be a potential reason for going that route.
__________________
Buggy Top Brewing Company

On Deck: Blueberry Blonde; Peanut Butter Stout; Bacon Beer
Primary:
Secondary:
Bottled: Winter Warmer; East India Porter; Tripel; Smoked Cranberry Stout; Leftover Pale Ale;
Kegged: Porter; Bock; Kitchen Sink (Belgian Pale Ale)

 
Reply With Quote
Old 08-22-2013, 05:28 PM   #5
antitelephonica
Recipes 
 
May 2013
Memphis, TN
Posts: 37
Liked 4 Times on 3 Posts


I went with the 15gal stainless steel sankey keg with false bottom for a mash tun as i am not partial to what happens when you mix 150 degree mash with plastic for an hour. Wrapped in a green military foam mat, it only loses 1 degree per hour and allows for 5 or 10 gal batches.

 
Reply With Quote
Old 08-22-2013, 05:53 PM   #6
feinbera
Recipes 
 
Aug 2012
San Francisco, CA
Posts: 877
Liked 206 Times on 158 Posts


Whatever you do, go bigger than 5 gallons! Even with low-to-medium-gravity batches that the mash volume calculators tell you will fit in five gallons with almost a gallon to spare, you'll appreciate having much more than a gallon spare space when you miss your temps by a few degrees and have to add water, or when you get to a "stir vigorously" step.

If you're DIY'ing, SS braid is easier and cheaper than false bottom (or manifold), and unless you're fly-sparging, you don't need to worry about channelling and what-not. I'd say, spend the $7 on the SS braid for now, keep it simple with batch sparging, and when and if you decide to upgrade your process, you'll have gotten your $7 worth outta that braid.

On a similar note, if you get a cooler, get one with a spigot -- you can unscrew the spigot by hand, leaving a perfect-sized hole for DIY or LHBS-bought 1/2" ID fittings.

BonzoAPD Likes This 
Reply With Quote
Old 08-22-2013, 08:22 PM   #7
BonzoAPD
Recipes 
 
Sep 2012
Congers, NY
Posts: 354
Liked 6 Times on 6 Posts


If I went the rectangle cooler way, which one would you recommend?

1) Coleman 48 Quart Chest Cooler for $24.99
http://www.dickssportinggoods.com/pr...0#BVRRWidgetID

2) Coleman 36 Qt. Extreme 5 Cooler for $39.99
http://www.dickssportinggoods.com/pr...121805&ppp=150

 
Reply With Quote
Old 08-22-2013, 08:35 PM   #8
Dolomieu
HBT_LIFETIMESUPPORTER.png
 
Dolomieu's Avatar
Recipes 
 
Jan 2012
Columbus, Ohio
Posts: 1,055
Liked 107 Times on 91 Posts


You asked about a braid and a false bottom, but what about a Cpvc manifold? I had a 5gal cooler with a braid and didn't care for the capacity or the braid. Made a fun out of an ice cube cooler with a Cpvc manifold and it worked much better. Of I hadn't moved to a keg with a false bottom I may have covered the manifold with the a ss braid.
__________________
Draft beer, Not me!!! - Belching Penguin

 
Reply With Quote
Old 08-22-2013, 09:09 PM   #9
BonzoAPD
Recipes 
 
Sep 2012
Congers, NY
Posts: 354
Liked 6 Times on 6 Posts


Quote:
Originally Posted by Dolomieu View Post
You asked about a braid and a false bottom, but what about a Cpvc manifold? I had a 5gal cooler with a braid and didn't care for the capacity or the braid. Made a fun out of an ice cube cooler with a Cpvc manifold and it worked much better. Of I hadn't moved to a keg with a false bottom I may have covered the manifold with the a ss braid.
Can you post more info on a Cpvc manifold?

 
Reply With Quote
Old 08-22-2013, 09:30 PM   #10
dgr
Recipes 
 
Jun 2013
Sac of California, CA
Posts: 279
Liked 73 Times on 47 Posts


http://www.homebrewtalk.com/f11/how-...-needs-123585/

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Building A Bar - Advice Needed bs04do General Chit Chat 15 06-20-2013 02:28 PM
Building A Mash Tun - Advice? andy6026 Beginners Beer Brewing Forum 12 04-22-2013 04:31 PM
Partial Mash Advice Needed KavDaven Beginners Beer Brewing Forum 10 04-28-2012 02:21 PM
More mash tun advice needed petep1980 All Grain & Partial Mash Brewing 8 01-26-2010 11:58 PM
Need help / advice on building a mash tun brian_g Equipment/Sanitation 4 06-27-2009 09:06 PM


Forum Jump