Best money I'll ever spend - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Best money I'll ever spend

Reply
 
Thread Tools
Old 10-24-2007, 07:34 PM   #1
shafferpilot
HBT_LIFETIMESUPPORTER.png
 
shafferpilot's Avatar
Recipes 
 
Sep 2007
Cincinnati OH
Posts: 1,579
Liked 20 Times on 19 Posts



Alright. When I did my first brew, my calculated mash efficiency was 82%. I figured I must have messed up the math or something, so I didn't want to say anything, especially since I sometimes read from people who are happy to get into the 70's. But my second mash (which I did last week but didn't get around to calculating) has come in at 84%. Talk about the luck of the idiot! Honestly, I have to chaulk this one up to the wonderful advice and designs available here at HBT. I knew when I started that I didn't want to spend a year making crap before figuring out how to do this. My researching nature paid off big time when I stumbled across all of you. Thanks again a million times I think it's time to pay the piper. I'll be a paying member after the next paycheck for sure. Best money I'll ever spend
__________________
A great man knows that he knows NOTHING

 
Reply With Quote
Old 10-24-2007, 08:19 PM   #2
Orfy
For the love of beer!
HBT_LIFETIMESUPPORTER.png
 
Orfy's Avatar
Recipes 
 
Sep 2005
Cheshire, England
Posts: 11,732
Liked 95 Times on 62 Posts


I'm glad you found it helpful.

Welcome on board.
__________________
GET THE GOBLIN
Have a beer on me.

 
Reply With Quote
Old 10-24-2007, 08:22 PM   #3
efreem01
HBT_LIFETIMESUPPORTER.png
 
efreem01's Avatar
Recipes 
 
Dec 2006
Hicksville, NY
Posts: 261

I'm still getting 50-55% efficiency.

Although i've yet to try my Cooler MLT/HLT.
__________________
Primary : Nada
Secondary Edwort's Apfelwein, AHS Titannia Wheat On Deck: LHBS IPA [Recipe Unknown], Corona Clone (Lawnmower Beer)
Bottled: Spicy Orange Pale Ale, Stone Cold Brown Ale Kegged: Spicy Pumpkin Ale
"When I read about the evils of drinking, I gave up reading"

 
Reply With Quote
Old 10-24-2007, 09:10 PM   #4
ohiobrewtus
 
ohiobrewtus's Avatar
Recipes 
 
Nov 2006
Ohio
Posts: 7,785
Liked 63 Times on 55 Posts


I agree. I also came here to ask some questions and learn. I ended up paying because in the end the information that was given to me was worth much more than the cost of the membership.
__________________
Quote:
Originally Posted by the_bird
Well, if you *love* it.... again, note that my A.S.S. has five pounds.

 
Reply With Quote
Old 10-24-2007, 09:13 PM   #5
JoSeR
 
JoSeR's Avatar
Recipes 
 
Sep 2007
Pensacola, FL
Posts: 87

I agree, I got laid up with a bum foot for a few weeks and read a few brew books and alot of threads on here in preparation for the switch to AG. I joined as soon as I saw the value of the forum. Money well spent

 
Reply With Quote
Old 10-24-2007, 09:15 PM   #6
shafferpilot
HBT_LIFETIMESUPPORTER.png
 
shafferpilot's Avatar
Recipes 
 
Sep 2007
Cincinnati OH
Posts: 1,579
Liked 20 Times on 19 Posts


Well, my equipment is hardly anything special. A friend who came by to help move some stuff peaked under the white sheet that protects my brew stuf from dust, and promptly asked when the next meth cooking session was happening.

Maybe my lauter technique has something to do with it. Here's the process:

I draw a gallon to a gallon and a half of wort into a holding pot, then slowly add it back to the tun. this clears out all the junk. All the while my sparge water is heating to about 185/190. I know that sounds too hot, but read on. I start lautering pretty slowly and bail sparge water into the tun with a small sauce pot. I pour slowly, but I constantly move the spot where I am pouring around the tun to make sure all grains are rinsed. The water level in the tun stays around 1/2 inch above the grains when I have the outflow set right. The grains stir around a bit, but that doesn't seem to disturb the bottom, filtering part. I keep a thermometer in the tun to monitor temp and strive for exactly 170. If the temp drops, I speed up the lautering and bailing a little so the hotter sparge water heats things back up. If the temp get's over 170 at all, I stop the lauter and wait for it to drop. Which doesn't take long if it's caught right away. About half way through, I shut off the lauter and stir the heck out of the tun. Then I draw a gallon or so off to clear it again, and go back to lautering. On the last batch I did my best to leave as little fluid in the tun as possible by stopping the water additions about a gallon before the boil pot was full. I know this sounds like a lot of crap to go through, but what else have I got to do? It's a little boring just sitting there watching. I am curious to try skipping the stirring in the middle and see if the efficiency goes up or down.

The only other thing I do, that most don't, is a dough-in around 100 degrees for about an hour. It's not necessary but I like to think it helps by letting everything get good and wet throughout. It also gives me time to get everything set and ready to go for all the steps that follow. Ya know like drinking a beer or three.....

BTW I just couldn't help it, and chilled another of my first batch to sip on today while crushing grains for tomorrow's stout brew and it just keeps tasting better and better. THANKS again to everybody!
__________________
A great man knows that he knows NOTHING

 
Reply With Quote
Old 10-25-2007, 01:53 AM   #7
jdoiv
 
jdoiv's Avatar
Recipes 
 
Mar 2007
Nashville, TN
Posts: 1,152
Liked 1 Times on 1 Posts


Sounds like you are basically fly sparging. How long does it take you to sparge all the grains?

Congrats on the good brew!
__________________
Drinking on the keg: BPA, Brown Ale, Dry Mead, Wee Heavy aged on Oak, CAP
Drinking in the Bottle:
Conditioning:
Fermenting:
Planning:

 
Reply With Quote
Old 10-25-2007, 04:38 AM   #8
shafferpilot
HBT_LIFETIMESUPPORTER.png
 
shafferpilot's Avatar
Recipes 
 
Sep 2007
Cincinnati OH
Posts: 1,579
Liked 20 Times on 19 Posts


Around 30 minutes. This time around I really hit all the temps right where I wanted 'em. It's like hitting the sweet spot on a golf club when things go the way you wanted. Reminds me of how I felt the first time a model airplane, built from scratch, flew.
__________________
A great man knows that he knows NOTHING

 
Reply With Quote
Old 10-25-2007, 09:19 PM   #9
colinwollmann
Recipes 
 
May 2007
manitoba,canada
Posts: 66

Quote:
Originally Posted by shafferpilot
Alright. When I did my first brew, my calculated mash efficiency was 82%. I figured I must have messed up the math or something, so I didn't want to say anything, especially since I sometimes read from people who are happy to get into the 70's. But my second mash (which I did last week but didn't get around to calculating) has come in at 84%. Talk about the luck of the idiot! Honestly, I have to chaulk this one up to the wonderful advice and designs available here at HBT. I knew when I started that I didn't want to spend a year making crap before figuring out how to do this. My researching nature paid off big time when I stumbled across all of you. Thanks again a million times I think it's time to pay the piper. I'll be a paying member after the next paycheck for sure. Best money I'll ever spend
Congrats Man!! nothing like good brewin!!
__________________
C-MANN

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Spend my money - burner & kettle underwaterdan Equipment/Sanitation 23 11-10-2009 10:25 PM
Help me spend some money(wisely)! Craig311 Equipment/Sanitation 21 02-05-2008 10:28 PM
I spend WAY to F'n Much Money Bsquared General Chit Chat 15 12-05-2007 04:42 PM
Help me spend my birthday money! sphericalcamel Equipment/Sanitation 10 04-23-2007 05:55 PM
Help me spend my Birthday money!! :) waskelton4 Equipment/Sanitation 12 05-23-2006 09:53 PM


Forum Jump