Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Ball Valve Size
Reply
 
Thread Tools
Old 07-25-2013, 10:22 PM   #1
Paloaf
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2012
Posts: 69
Liked 2 Times on 2 Posts
Likes Given: 1

Default Ball Valve Size

I got trigger happy on Ebay when I ordered some new ballvalves and ended up with some SS reduced ports. They are the exact same as the valve shown here:
http://www.brewbrothers.biz/Ball-Valve-12-SS-STD

I had ordered four of these to use on the input and output to my HERMS coil in my HLT and to the input on my filling valves for my MLT and HLT located near the top of the kettles.

Does anyone see a problem using these when the rest of my HERMS system is set up with 1/2" all around? I'm using a March pump and gravity mixed.


Paloaf is offline
 
Reply With Quote
Old 07-26-2013, 06:27 PM   #2
microbusbrewery
Senior Member
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
microbusbrewery's Avatar
Recipes 
 
Join Date: Jan 2011
Location: West Jordan, UT
Posts: 1,466
Liked 140 Times on 108 Posts
Likes Given: 60

Default

Quote:
Originally Posted by Paloaf View Post
I got trigger happy on Ebay when I ordered some new ballvalves and ended up with some SS reduced ports. They are the exact same as the valve shown here:
http://www.brewbrothers.biz/Ball-Valve-12-SS-STD

I had ordered four of these to use on the input and output to my HERMS coil in my HLT and to the input on my filling valves for my MLT and HLT located near the top of the kettles.

Does anyone see a problem using these when the rest of my HERMS system is set up with 1/2" all around? I'm using a March pump and gravity mixed.
I have one of those mixed in somewhere in my setup...I think it's on my mash tun outlet. I have a HERMS too and I never run the ball valve on the pump full open so it's never been an issue. It drains slower than a full flow port would, so it may take a couple seconds longer to prime the pump, but once it's primed it doesn't have any trouble keeping up with the pump outlet.
__________________
http://www.microbusbrewery.org/
microbusbrewery is online now
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
What size greenlee punch for a weldless ball valve? sethhobrin Electric Brewing 5 07-05-2012 04:41 PM
ball valve size HansF Brew Stands 4 12-07-2011 09:40 AM
Ball valve vs. Gate valve for MLT, have question JRems Equipment/Sanitation 4 04-11-2011 01:40 AM
Opinions On Ball Valve, Gate Valve, Or Globe Valve For March Pumps jcav Brew Stands 13 10-16-2010 03:56 AM
Mashtun ball valve size.... rsmith179 Kettles, Mash Tuns, & Hot Liquor Tanks 6 02-28-2009 09:23 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS