Flat beer - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > General Techniques > Flat beer

Reply
 
Thread Tools
Old 07-04-2013, 11:50 PM   #1
seasnan
Recipes 
 
Jul 2013
Posts: 24



I just opened my first batch of homebrew, a southern English Brown Ale and found it to be somewhat flat. There is some carbonation present but not nearly enough. I used a yeast culture that a friend made at short notice due to an unscheduled HBS closure and corn sugar. I think that the culture did not create a significant colony of cells, therefore most of the yeast expired during fermentation and didn't make it into the bottles for carbonation. Does this theory make sense?

Any ideas how I could fix this for this batch. I still have a few dozen 12 oz bottles, the flavor is great so I've been drinking them anyway. Could I add a small amount of corn sugar and yeast to each bottle? If so, how much could I add without having 24 bottle bombs in my closet?

Slainte!

 
Reply With Quote
Old 07-04-2013, 11:54 PM   #2
Epimetheus
Recipes 
 
Oct 2012
Amherst, MA
Posts: 793
Liked 99 Times on 83 Posts


if you already added the proper amount of priming sugar, then do not add more. it is still there because the yeast did not use it. I defer to more experienced people on what yeast to add.
__________________
Whether beer is made in waders or in a toilet tank, as long as it is fun and the brewer likes how it tastes, who cares how it is brewed?
- VladOfTrub

Add your water analysis to the water report map! Instructions on this thread

 
Reply With Quote
Old 07-05-2013, 05:56 PM   #3
KepowOb
Recipes 
 
Jun 2013
Montreal, Quebec
Posts: 508
Liked 57 Times on 53 Posts


How long ago did you bottle them?

General rule of thumb seems to be 3-weeks at room temp to get proper carbonation.

 
Reply With Quote
Old 07-06-2013, 12:21 AM   #4
seasnan
Recipes 
 
Jul 2013
Posts: 24


I fermented the beer for 10 days and bottled it about 4 weeks ago. I started drinking them about a week out to get a better idea of the maturation process and I haven't noticed an increase in carbonation since the first bottle.

 
Reply With Quote
Old 07-06-2013, 01:46 PM   #5
KepowOb
Recipes 
 
Jun 2013
Montreal, Quebec
Posts: 508
Liked 57 Times on 53 Posts


Quote:
Originally Posted by seasnan
I fermented the beer for 10 days and bottled it about 4 weeks ago. I started drinking them about a week out to get a better idea of the maturation process and I haven't noticed an increase in carbonation since the first bottle.
After four weeks the carbonation should be pretty good... Did you carb them up at room temp?

Also, the recipe was for an English ale... How much priming sugar did the recipe call for? If it was trying to replicate a real English ale, the carbonation levels might be really low on purpose. A properly carbonated English ale seem flat to North American standards.

 
Reply With Quote
Old 07-06-2013, 01:52 PM   #6
Enoch52
Recipes 
 
Aug 2012
Posts: 227
Liked 24 Times on 10 Posts


There's another possibility: even though you added corn sugar it might not have actually made it into the bottles.

I've had that problem with my last two batches: I added a corn sugar solution and racked the beer on top of it, expecting that to agitate it enough to mix. Apparently it didn't. One batch was poorly carbonated nearly throughout, and another batch had two bottle bombs and the rest poorly carbonated. I suspect not stirring left all the sugar at the bottom, so there was nothing for the yeast to eat.

I ended up uncapping them and adding 1/4tsp corn sugar directly to each bottle (previous experiments showed this to be the best amount for the carbonation I had). If you decide to go this route, be cautious: you may have a few dangerously carbonated beers, and by adding additional sugar you could create a risk of bottle bombs if any of the beers are actually well-carbed.
__________________
Lines on Ale (linesonale.blogspot.com)

Bottled: NB Irish Red; 1-gallon SMaSH IPA's: Citra, Cascade, Simcoe, Falconer's Flight and Mosaic; Bavarian Hefeweisen; Centennial Blonde; EdWort's apfelwein
Conditioning:
Primary: Mosaic IPA
On Deck: Cherry Melomel
Gone But Not Forgotten: Blue Schoon (Blue Moon clone)

 
Reply With Quote
Old 07-06-2013, 04:55 PM   #7
peter78
Recipes 
 
Jun 2011
Washington, DC
Posts: 167
Liked 3 Times on 3 Posts


Just give it more time. As long as you put enough sugar initially, it will carb. I have waited 8-10 weeks for some of my beers....

 
Reply With Quote
Old 07-07-2013, 01:37 AM   #8
seasnan
Recipes 
 
Jul 2013
Posts: 24


Thanks for all the responses. I think I'm going to just enjoy the beer I have left. I think it's really good, just a little flat. Enoch's post has me a bit worried about adding anything to the bottles. I used the amount of priming sugar called for in the recipe, so maybe Kepow is right and I've actually made an accurate English ale. Is there a way to measure the amount of carbonation in the bottle so I can see if the levels are accurate to the style?

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
why is my beer flat? gone Extract Brewing 8 03-20-2013 10:07 PM
flat beer joshangell Beginners Beer Brewing Forum 4 08-25-2012 10:49 PM
Beer Gun: loss of carbonation- beer is flat Tvc15 General Beer Discussion 6 07-20-2012 05:44 PM
Flat Beer!! justinwillsie Bottling/Kegging 1 02-07-2012 01:55 AM
Flat commercial beer: Carb myself, drink flat, return? Triocd General Beer Discussion 9 02-04-2011 10:10 PM


Forum Jump