Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Kegging advice
Reply
 
Thread Tools
Old 06-28-2013, 01:09 PM   #1
will_rouse
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Posts: 104
Liked 4 Times on 4 Posts

Default Kegging advice

I'm about to get into kegging I've looked at what seems like a thousand websites and reviews. Is there any company's y'all recommend or anything to watch out for. And is it worth to buy refurbished kegs or should I go ahead and buy new?


__________________
I don't think I've drunk enough beer to understand that.
― Terry Pratchett, The Last Continent
will_rouse is offline
 
Reply With Quote
Old 06-28-2013, 01:12 PM   #2
Pratzie
HBT_LIFETIMESUPPORTER.png
Feedback Score: 1 reviews
 
Pratzie's Avatar
Recipes 
 
Join Date: Sep 2012
Location: Northeastern Pennsylvania
Posts: 1,549
Liked 153 Times on 108 Posts
Likes Given: 112

Default

Stick with ball locks and if u go with refurbished, don't get any that are marked "Root beer" as you'll never get that flavor out of them no matter how long u soak.

Oh and check with ur local LHBS and see if they sell refurbished ones. Usually cheaper and will save u the cost of shipping.


__________________
Bottled: Nothing :(
Kegged: Nothing :(
Primary: Empty
Secondary: Empty
Aging:
On Deck: Deception Cream Stout, BierMuncher's Centennial Blonde, Yooper's Oatmeal Stout, Joe's Ancient Orange Mead, Reaper's Mild
Pratzie is offline
 
Reply With Quote
Old 06-28-2013, 01:12 PM   #3
USAFSooner
Feedback Score: 1 reviews
Recipes 
 
Join Date: Jul 2012
Location: Norman, OK
Posts: 353
Liked 49 Times on 36 Posts
Likes Given: 1

Default

I got my setup from BeverageDepot. Refurbed kegs are fine.
USAFSooner is offline
 
Reply With Quote
Old 06-28-2013, 01:22 PM   #4
Misplaced_Canuck
HBT_LIFETIMESUPPORTER.png
Feedback Score: 1 reviews
 
Misplaced_Canuck's Avatar
Recipes 
 
Join Date: Jan 2011
Location: NE Columbia SC - Formerly, Montreal Canada
Posts: 2,835
Liked 155 Times on 127 Posts
Likes Given: 51

Default

Quote:
Originally Posted by Pratzie View Post
Stick with ball locks and if u go with refurbished, don't get any that are marked "Root beer" as you'll never get that flavor out of them no matter how long u soak.

Oh and check with ur local LHBS and see if they sell refurbished ones. Usually cheaper and will save u the cost of shipping.
Pin locks work fine and are cheaper than ball locks.

Root beer kegs can easily be cleaned: Take is all apart, soak with oxy-clean, and replace all rubbers. Done.

MC
__________________
Quote:
Originally Posted by Misplaced_Canuck
Carbonic bite? Is that like the bubonic plague?
Quote:
Originally Posted by ebstauffer
Needless to say after more than a few drams my mental efficiency matched my mashing efficiency.
Misplaced_Canuck is offline
 
Reply With Quote
Old 06-28-2013, 01:51 PM   #5
LLBeanJ
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
LLBeanJ's Avatar
Recipes 
 
Join Date: Feb 2012
Location: Windsor, CO
Posts: 2,241
Liked 451 Times on 337 Posts
Likes Given: 173

Default

I've personally used Kegconnection and ritebrew.com. Both have been awesome to deal with.

As far as pin lock (Coke products) vs. ball lock (Pepsi products), as was already mentioned, pin locks are a little cheaper, since they are more readily available. I like ball locks myself because of the physical size (taller and skinnier than pin locks, which fit better in my keg fridge), as well as the fact that they have a manual pressure release valve (convenient, but not necessary). A buddy of mine has a small store-purchased kegerator that doesn't have enough height clearance to accommodate a ball lock, so he uses a pin lock that was converted to ball lock, which is 3 inches shorter than an actual ball lock.

Before you decide which way to go, consider where you will be using them and figure out if size will be an issue. IIRC, ball locks are 8.5 dia x 25 tall and pin locks are 9.0 x 22. Also keep in mind that pin locks can be converted to ball lock and you can purchase ones that have already been converted. Cornykeg.com, among others, sells these.

I have 10 kegs and all were purchased used and had no problems cleaning them up. New would be nice, but I can't yet justify the cost when used ones work perfectly fine for about half the cost of new.
LLBeanJ is offline
 
Reply With Quote
Old 06-28-2013, 02:16 PM   #6
Stirs
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Colington Island, NC
Posts: 36
Liked 11 Times on 4 Posts
Likes Given: 18

Default

I've always had bad luck with ball lock and pin lock. I switched to sanke kegs and no more problems. Yes, they cost more, but check with your local scrap yard. They are built to last for ever.
Stirs is offline
 
Reply With Quote
Old 06-28-2013, 02:16 PM   #7
will_rouse
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Posts: 104
Liked 4 Times on 4 Posts

Default

Thanks for all the feedback! One more question, Does a picnic tap foam worse than a fridge kit? I have a mini fridge that I can convert into a kegerator but besides looks is it much more convenient?
__________________
I don't think I've drunk enough beer to understand that.
― Terry Pratchett, The Last Continent
will_rouse is offline
 
Reply With Quote
Old 06-28-2013, 02:28 PM   #8
Pratzie
HBT_LIFETIMESUPPORTER.png
Feedback Score: 1 reviews
 
Pratzie's Avatar
Recipes 
 
Join Date: Sep 2012
Location: Northeastern Pennsylvania
Posts: 1,549
Liked 153 Times on 108 Posts
Likes Given: 112

Default

Quote:
Originally Posted by Misplaced_Canuck View Post
Root beer kegs can easily be cleaned: Take is all apart, soak with oxy-clean, and replace all rubbers. Done.

MC
I wish I had been that lucky. took one for free off of my LHBS (he refuses to take them from his supplier and missed the one label) to try it. Soaked 4 times in oxyclean for a minimum of one day each and also replaced all the rings. I can still smell it. And i know alot of people who have tried that as well with no success.
__________________
Bottled: Nothing :(
Kegged: Nothing :(
Primary: Empty
Secondary: Empty
Aging:
On Deck: Deception Cream Stout, BierMuncher's Centennial Blonde, Yooper's Oatmeal Stout, Joe's Ancient Orange Mead, Reaper's Mild
Pratzie is offline
 
Reply With Quote
Old 06-28-2013, 02:52 PM   #9
stpug
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2012
Posts: 3,173
Liked 533 Times on 457 Posts
Likes Given: 318

Default

Quote:
Originally Posted by will_rouse View Post
I'm about to get into kegging I've looked at what seems like a thousand websites and reviews. Is there any company's y'all recommend or anything to watch out for. And is it worth to buy refurbished kegs or should I go ahead and buy new?
Kegging will change your whole outlook on beer making - at least it did for me

I used kegconnection at a time when they had some of the lowest costs. They were awesome to deal with and took care of me very well. Great customer service.

Refurbished kegs are the way to go unless you're kegerator/keezer has a glass door . You'll save a ton of money, won't care if they accidentally get dinged, won't feel like you always need to be cleaning them, and they'll function everybit as good as a new keg.

As for ball or pin lock.... Measure your space and buy what fits. My refrigerator cannot accommodate the height of ball locks plus their disconnects so I went with pin lock. In my case, I can fit 4 pin locks plus a steel 10 lb co2 talk inside. Even if I could fit ball locks, I would still only be able to fit 4 plus the tank. Some freezers on the other hand can accommodate more ball locks than pin locks but might require you build a collar.

You can always buy the flared disconnects for the opposite style if you end up with one or want to have friends bring over their opposite-style kegs.

IIRC:
Pin lock plus disconnect: 22 + 1.5 = 23.5" tall (9" diam)
Ball lock plus disconnect: 25 + 1 = 26" tall (8.5" diam)

Hope this helps!
__________________
:: St. Pug ::
stpug is offline
 
Reply With Quote
Old 06-28-2013, 03:02 PM   #10
BigFloyd
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2012
Location: Tyler, Texas
Posts: 5,163
Liked 720 Times on 627 Posts
Likes Given: 630

Default

I've been getting my kegs from Adventures in Homebrewing whenever they put sets of 4 ball locks on sale- http://www.homebrewing.org/5-Gallon-...Used_p_70.html For some reason, when you get 4, the shipping per keg is most reasonable.

I went with ball locks since almost all of them out there have a pressure relief valve in the lid standard. It's more handy than you might think.

For my keezer internals, after shopping it around quite a bit, I bought from http://www.birdmanbrewing.com/ The owner, Brian, is a great guy, an HBT vendor and took good care of me.


__________________
Good Temp Control -----> Happy Yeast ------> Tasty Brew
BigFloyd is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
advice on kegging Hef dfwarwick Fermentation & Yeast 4 01-24-2013 01:37 PM
New to Kegging some advice??? sasjodi Equipment/Sanitation 11 09-24-2010 02:22 AM
Looking for some advice kegging Winderbrau Bottling/Kegging 5 06-30-2009 10:44 PM
looking for kegging advice jklotz Bottling/Kegging 11 10-27-2008 11:00 PM
Kegging Advice Saint George Equipment/Sanitation 3 05-13-2007 02:06 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS