Yeast Washing Illustrated - Page 99 - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > Yeast Washing Illustrated
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 04-25-2011, 10:40 PM   #981
TacoGuthrie
Recipes 
 
Jan 2009
P.R., B.C.
Posts: 428

Here are three different strains i have washed. I used the same methods, including volume of water, on all of them but have pretty varied results after settling.



I posted this picture in another thread and someone mentioned that my slurry is too thin and to use less water next time. Comments?



 
Reply With Quote
Old 04-25-2011, 11:43 PM   #982
Chefencore
Recipes 
 
Feb 2011
Columbus, OH
Posts: 346
Liked 7 Times on 7 Posts


Quote:
Originally Posted by TacoGuthrie
Here are three different strains i have washed. I used the same methods, including volume of water, on all of them but have pretty varied results after settling.

I posted this picture in another thread and someone mentioned that my slurry is too thin and to use less water next time. Comments?
How much water are you putting in? Put in what you want to get out I am using half-pint jars and usually throw in 5 or so(5 cups). I expect to get out at least 5-6. After a few weeks I decant and combine them into 1 or 2 just because I have only 12 jars right now. But I generally get more yeast than what you have.

If you have an abundance of jars, and you're going to reuse quickly, I'd use 4-5 jars, and use each as a starter for your next batch. That way you cut down on the generations.


__________________
"What do you use to weigh down your hop spider?"

"Hops..."

 
Reply With Quote
Old 04-26-2011, 02:56 AM   #983
TacoGuthrie
Recipes 
 
Jan 2009
P.R., B.C.
Posts: 428

I have been putting in as much water as in the OP. A large mason jar (1L) and 4 smaller ones (250ml).

Sounds like next time I will heed your advice and 'put in what i want out'.

I think i'm going to decant and combine what i've got. that is another good idea.

 
Reply With Quote
Old 04-26-2011, 09:26 PM   #984
Kealia
Recipes 
 
Aug 2010
US
Posts: 540
Liked 42 Times on 35 Posts


I've ended up with anywhere between what you have in the darkest one and the one next to it. I brew a lot of 2.5 gallon batches so I pitch that amount into a starter (after decanting) and it's worked well. For a 5-gallon batch I'd either double up on them or step up a starter to build up more yeast, though.

I also didn't like having 10-12 jars taking up space in my fridge where my beer should be chilling so I started decanting the liquid off and pouring the yeast carefully back into a sanitized test tube like they came in.

 
Reply With Quote
Old 04-28-2011, 03:02 PM   #985
BrewerofBeer
Recipes 
 
Mar 2011
kuna, idaho
Posts: 14

I used this method with great results! But i have a question for you guys. The yeast i harvested came from an under pitched beer. The beer turned out ok, but i wonder if by under pitching that beer that would make the yeast any worse off. I am planning on making this same beer again soon and was going to just reuse this yeast after making a starter for it. Btw this was a lower grav beer at 1.053 which finished out at 1.008. Thanks in advance.

 
Reply With Quote
Old 04-28-2011, 08:31 PM   #986
theshoe82
HBT_LIFETIMESUPPORTER.png
 
theshoe82's Avatar
Recipes 
 
May 2010
Norwood, Massachusetts
Posts: 133
Liked 7 Times on 6 Posts


After pouring through pages upon pages of posts, I have a noob-ish question I did not see answered.

Are we harvesting this yeast from the primary fermentation vessel or the secondary fermentation vessel?

Thanks!
-DC

 
Reply With Quote
Old 04-28-2011, 08:37 PM   #987
Rick500
Recipes 
 
Jun 2008
KY
Posts: 2,600
Liked 15 Times on 13 Posts


Harvest from the primary. If you harvest from the secondary, you'll be selecting for poorly-flocculating yeast (as it hadn't already flocced out in the primary).

 
Reply With Quote
Old 04-28-2011, 08:41 PM   #988
TacoGuthrie
Recipes 
 
Jan 2009
P.R., B.C.
Posts: 428

Use the yeast cake from the primary, theshoe.

 
Reply With Quote
Old 04-29-2011, 02:20 AM   #989
TacoGuthrie
Recipes 
 
Jan 2009
P.R., B.C.
Posts: 428

What is the best method for combining jars?

Can i decant 2 and pour it into an jar with existing yeast? Or is it better to totally sanitize another jar, decant and combine into that one?

 
Reply With Quote
Old 04-29-2011, 07:43 PM   #990
AugustDerleth
Recipes 
 
Sep 2010
Capetown
Posts: 198
Liked 4 Times on 4 Posts


Quote:
Originally Posted by BrewerofBeer View Post
. Btw this was a lower grav beer at 1.053 which finished out at 1.008. Thanks in advance.
I might be missing something here, but 1.053 as an OG isn't actually what I would call "low-gravity" necessarily. A majourity of the beers I have made have been around that gravity (or even lower) with the exception of some strong stouts, and you should have an ABV of about 5.8%. That's not terrible. With no more info on what kind of beer it is or what the OG was "supposed" to be, it sounds like it might not actually have been low-grav. . .


__________________
HABITUALLY PRACTICING MODERATION
Primary:
Secondary: BloodBerry Melomel, Raspberry Melomel, Peach Melomel, Semi-dry Traditional Mead,
Bottled: Edwort's Apfelwein, S.O.F. Ale, D.C.O.S., AAA2, AAA3, OSS, SS211, DPDB, Thunderstruck Pumpkin Ale, Arachnid Brown Ale, Oktoberfeast, Apple Cider1, Apple Cider2, AAA1

SWIBA: (She Who Is Bad Ass) bought me a 6gal Better Bottle! Excellent.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Yeast washing vs. yeast harvesting (kraeusen skimming) Dogslovebeer General Techniques 14 05-30-2013 06:05 PM
Washing yeast, starters, pre-made wort, all kinds of yeast Q's 98EXL General Techniques 15 09-06-2011 05:55 PM
Conical to Keg Illustrated John Beere Bottling/Kegging 25 03-21-2011 07:38 PM
Decoction, An Illustrated PPT Presentation BierMuncher General Techniques 2 01-03-2008 11:30 PM
My first All-Grain...Illustrated BierMuncher All Grain & Partial Mash Brewing 28 02-01-2007 06:19 PM


Forum Jump