Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Cornelius Kegs question
Reply
 
Thread Tools
Old 05-30-2013, 01:33 AM   #1
Labradork
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Labradork's Avatar
Recipes 
 
Join Date: Jan 2013
Location: Port Angeles, WA
Posts: 35
Liked 2 Times on 2 Posts
Likes Given: 2

Default Cornelius Kegs question

Howdy folks...


I want to get into kegging my beer and have decided to use Corny kegs. I am looking at some on Amazon and have noticed that some are "Ball-Lock" and some are "Pin-Lock". What is the difference and which are better for homebrewer purposes?

Thanks so much in advance. This forum has been a tremendous help as I get further into this wonderful hobby. Having access to the collective wisdom and experience of the Homebrew community is invaluable.

Labradork


Labradork is offline
justkev52 Likes This 
Reply With Quote
Old 05-30-2013, 01:48 AM   #2
uxo
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2013
Location: San Diego, CA
Posts: 125
Liked 11 Times on 10 Posts
Likes Given: 12

Default

I started writing out an explanation but I found this vid.

http://www.youtube.com/watch?feature...&v=2VgL9JkjCV4


uxo is offline
 
Reply With Quote
Old 05-30-2013, 07:20 AM   #3
spaceyaquarius
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Location: Oklahoma City, OK
Posts: 402
Liked 8 Times on 8 Posts
Likes Given: 61

Default

I didn't watch that vid, but I have a Corny ball-lock 5 gallon keg. I really like it.

When you get either type, take the pin/ball-locks apart with a tool and replace every seal/o-ring with a new one from amazon or your local brew shop. buy keg lube and put it on the seal/o-rings to make them last longer.

I was told that my Corny was refurbished and they lied to me and it leaked the first time I kegged. Cost is very low for the seals.
spaceyaquarius is offline
 
Reply With Quote
Old 05-30-2013, 08:27 AM   #4
Rbeckett
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Bronson, Fl
Posts: 990
Liked 70 Times on 49 Posts
Likes Given: 29

Default

Pin and Ball are descriptive of the connector on top of the kegs for Gas in and liquid out posts. Ball lock are a Pepsi product and coke used Pin lock, there are a few subtle differences like a slight diff in height and diameter and whether or not they have a manually activated purge valve or a safety pop off. Generally they have discontinued Pin locks so they will eventually become scarce, on the other hand you can buy brand new never been used ball lock kegs from a number of suppliers. I have a pin lock system and only plan to use a total of 4 kegs. 2 for root beer and 2 different beers. Since it's just me and momma, we don't really need 4 but that will do for how much we drink.

Wheelchair Bob
__________________
What do you mean "no Kidneys"???, WTF now I gotta drink less beer...
Join the Automation sub forum in Electric brewing for a discussion of components and control systems. I did!!!!
Rbeckett is offline
 
Reply With Quote
Old 05-30-2013, 03:23 PM   #5
DrunkleJon
HBT_LIFETIMESUPPORTER.png
Feedback Score: 3 reviews
 
DrunkleJon's Avatar
Recipes 
 
Join Date: Jan 2011
Location: Alexandria, Virginia
Posts: 6,620
Liked 1958 Times on 1384 Posts
Likes Given: 959

Default

Currently the biggest differences are that Pin Locks tend to be a little taller, at times do not have pressure relief valves, and as far as I have seen are a touch cheaper than ball locks. Ball Locks seem to be more popular. Just pick one and stick with it. Or you can always get a set of the other style quick disconnects and go with both. It is all personal preference.
DrunkleJon is online now
 
Reply With Quote
Old 05-30-2013, 03:32 PM   #6
SteveWPG
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Winnipeg, MB
Posts: 44
Liked 4 Times on 4 Posts

Default Pin vs Ball

All of the pin locks I've seen are shorter and fatter than ball locks. Personally I would go for ball locks because they are skinnier and you can fit more of them in a kegerator/keezer as height doesn't seem to be as much of an issue.
SteveWPG is offline
 
Reply With Quote
Old 05-30-2013, 03:39 PM   #7
MuddyCreek
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
MuddyCreek's Avatar
Recipes 
 
Join Date: Aug 2012
Location: Butte, MT
Posts: 672
Liked 326 Times on 168 Posts
Likes Given: 144

Default

I have two ball-locks and one pin-lock. I was worried that I wouldn't like the pin-lock (the third keg I purchased) as well but it turns out that I find it easier to connect and disconnect than the ball-lock quite often. If you have pressure in the ball-lock keg, it can be a bit tough to snap on the connectors unless you do a quick purge. The pin-locks however just twist right on regardless of pressure in the keg.
__________________
Muddy Creek Brewery
~~~~~~~~~~~~~~~~~~
2 E. Galena Street
Butte, MT 59701

http://www.muddycreekbrewery.com

MuddyCreek is offline
justkev52 Likes This 
Reply With Quote
Old 05-30-2013, 05:04 PM   #8
Fordmi
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Location: Huntington Beach, CA
Posts: 151
Liked 26 Times on 18 Posts
Likes Given: 9

Default

In my experience, ball locks are more readily available. It's just a matter of getting your home system set up one way or another and sticking with it. Having a mix of both could be annoying.

You can also convert pin locks to ball locks if you wanted to. And pin lock kegs are definitely shorter and wider.
Fordmi is offline
 
Reply With Quote
Old 05-30-2013, 05:10 PM   #9
DrunkleJon
HBT_LIFETIMESUPPORTER.png
Feedback Score: 3 reviews
 
DrunkleJon's Avatar
Recipes 
 
Join Date: Jan 2011
Location: Alexandria, Virginia
Posts: 6,620
Liked 1958 Times on 1384 Posts
Likes Given: 959

Default

Quote:
Originally Posted by Fordmi View Post
In my experience, ball locks are more readily available. It's just a matter of getting your home system set up one way or another and sticking with it. Having a mix of both could be annoying.

You can also convert pin locks to ball locks if you wanted to. And pin lock kegs are definitely shorter and wider.
My apologies on the bad information. I stand.. err sit, corrected. ball locks are taller, pin are shorter and wider.
DrunkleJon is online now
 
Reply With Quote
Old 05-30-2013, 05:57 PM   #10
Fordmi
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Location: Huntington Beach, CA
Posts: 151
Liked 26 Times on 18 Posts
Likes Given: 9

Default

Quote:
Originally Posted by DrunkleJon View Post
My apologies on the bad information. I stand.. err sit, corrected. ball locks are taller, pin are shorter and wider.
Haha no worries

I was helping a buddy decide on which setup over the weekend so the info was fresh.


Fordmi is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brewing my first batch of beer TODAY! Quick question about cornelius kegs & sugar burmjohn Equipment/Sanitation 12 07-05-2011 06:02 PM
For Sale - WTB - All sizes of cornelius kegs and 15 gal sanke Kegs in Ohio pola0502ds For Sale 4 05-12-2011 11:11 AM
Cornelius kegs adetherton Equipment/Sanitation 5 03-08-2010 05:14 PM
Cornelius Kegs homebrewer_99 Wine Making Forum 8 09-20-2006 10:30 PM
Cornelius Kegs psymonkey Equipment/Sanitation 6 02-19-2006 12:32 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS