Pennsylvania Complete 10G AG System - Home Brew Forums

Register Now!
Home Brew Forums > Home Brew Market > For Sale > Pennsylvania Complete 10G AG System

Closed Thread
 
Thread Tools
Old 05-19-2013, 01:58 PM   #1
Jeebas
HBT_LIFETIMESUPPORTER.png
 
Jeebas's Avatar
Recipes 
 
Mar 2010
Pittsburgh, Pennsylvania
Posts: 474
iTrader: (3)
Liked 37 Times on 26 Posts



I bought this system at the beginning of 2012 from my friends who opened a brewery and had used this as their pilot system to test out new recipes, I added some gadgets to it (camlocks everywhere, thermometers and sightglasses, new pump, etc.) and have used it about 5 times. There is nothing wrong with it, I just want to move to smaller batches / electric brewing.

Brewstand




Angle Iron Brewstand on casters
Two banjo KAB4 burners mounted
Black steel plumbing for two stand burners (there is actually plumbing for a third I just never found a way to adapt the hose from the SQ14 to fit into the black steel plumbing)
When I got this, it came with a third 10" burner but it was not mounted, so rather than spend money trying to find a way to mount it, I made a wood platform for the SQ14 to hold the HLT to gravity drain into the HLT. I have used this 5 times with high heat and have had no issues. I can either include the 10" burner if the buyer wants to have it to mount it (there is already a spot for it in the black steel gas plumbing) or I can throw in the SQ-14.

Kettles
All are 316 Stainless Steel. I am not sure where they were originally purchased from but they resemble polarware pots 13" tall, 18" diameter. They each have a lid.

HLT - Sold



Diptube -> Bulkhead -> 2 Piece Ball Valve with Heatshield -> Male Camlock
BrewHardware Sightglass Thermometer Combo with Heatshield

MLT - Sold



False bottom from MoreBeer (I drilled a hole through this so the diptube would fit through this, original owners had used a kettlescreen instead of a FB)
Diptube -> Bulkhead -> 2 Piece Ball Valve with Heatshield -> Male Camlock
BrewHardware Thermometer
1/2" Hose Barb -> Recirculation Port -> Male Camlock
Hole (for Blichmann AutoSparge - I sold this previously as I didn't need it) I currently have this hole plugged with 1/2" NPT Cap, 1/2" Close Nipple, and 1/2" NPS Locknut.

BK - Sold



Diptube (Covered with SS Mesh from KettleScreen to aid in hop/trub filtering) -> Bulkhead -> 2 Piece Ball Valve with Heatshield -> Male Camlock
BrewHardware Sightglass with Heatshield

March Pump Toolbox (http://www.homebrewtalk.com/f51/marc...-build-324780/)



March 815PL High Flow Beer Pump
Male Camlock on Pump Inlet
2 Piece Ball Valve -> Male Camlock on Pump Outlet
Power Inlet (You would need an extension cord to power this)
Switch operates pump
GFCI Outlet (before pump) is always on

Two Piece Immersion Chiller



Hoses - Sold



All are 1/2" ID High Temp Silicone Tubing
With the exception of the mash recirculation hose, all have Street 90 elbow -> Camlock B on BOTH ends

3' Length, 4' Length, 6' Length and Mash Recirculation Tube 2' Length that connects to a T that then connects to a Loop of more tubing with holes in it.

Ideally I would like to get rid of this locally (Pittsburgh / Western PA) all together. I am not interested in going the split n' ship route.

Looking for $1600 for everything.

 
Old 05-28-2013, 02:42 PM   #2
Jeebas
HBT_LIFETIMESUPPORTER.png
 
Jeebas's Avatar
Recipes 
 
Mar 2010
Pittsburgh, Pennsylvania
Posts: 474
iTrader: (3)
Liked 37 Times on 26 Posts


I just put this up on CL today - http://pittsburgh.craigslist.org/for/3833995083.html

I could be talked into splitting this up locally

 
Old 06-03-2013, 02:48 PM   #3
Jeebas
HBT_LIFETIMESUPPORTER.png
 
Jeebas's Avatar
Recipes 
 
Mar 2010
Pittsburgh, Pennsylvania
Posts: 474
iTrader: (3)
Liked 37 Times on 26 Posts


I am willing to let this go for $1400. I am not in a huge hurry to get rid of this, but really can't buy stuff for my new system until I sell this, so the sooner the better.

I will entertain any reasonable offers and answer any questions about any part of the system, I am still not looking to ship anything.

Thanks for looking!

 
Old 06-17-2013, 04:13 PM   #5
Jeebas
HBT_LIFETIMESUPPORTER.png
 
Jeebas's Avatar
Recipes 
 
Mar 2010
Pittsburgh, Pennsylvania
Posts: 474
iTrader: (3)
Liked 37 Times on 26 Posts


OK I have decided to split this up - locally.

I already have a tentative buyer for the HLT and MLT - here are the prices for everything else

Brew Kettle - $200
March Pump toolbox - $175
Immersion Chiller - $40
Hoses - $90
Stand (includes two burners, plumbing, and third SQ14 burner or 10" Burner) - $300

 
Old 06-17-2013, 06:03 PM   #6
timmber
 
timmber's Avatar
Recipes 
 
Jan 2012
Springfield, IL
Posts: 342
iTrader: (4)
Liked 3 Times on 3 Posts


Would love to have the hoses if you would ship....

 
Old 06-17-2013, 06:05 PM   #7
timmber
 
timmber's Avatar
Recipes 
 
Jan 2012
Springfield, IL
Posts: 342
iTrader: (4)
Liked 3 Times on 3 Posts


Actually what kinda deal on pump toolbox and hoses shipped?

 
Old 06-26-2013, 01:35 AM   #8
Jeebas
HBT_LIFETIMESUPPORTER.png
 
Jeebas's Avatar
Recipes 
 
Mar 2010
Pittsburgh, Pennsylvania
Posts: 474
iTrader: (3)
Liked 37 Times on 26 Posts


I am willing to ship everything but the brewkettle and the brewstand.

Willing to entertain reasonable offers on everything.

 
Old 06-27-2013, 02:28 PM   #9
Jeebas
HBT_LIFETIMESUPPORTER.png
 
Jeebas's Avatar
Recipes 
 
Mar 2010
Pittsburgh, Pennsylvania
Posts: 474
iTrader: (3)
Liked 37 Times on 26 Posts


Update:

Brew Kettle - Sold PP
March Pump toolbox - $175
Immersion Chiller - $40
Hoses - Sold
Stand (includes two burners, plumbing, and third SQ14 burner or 10" Burner) - $300

Remaining items total up to $515 together, willing to let them go altogether for $475 as a bundle, obviously local pickup because of the stand. Otherwise I will ship anything else.

Thanks for looking!

 
Old 06-28-2013, 01:41 PM   #10
peggjam
Recipes 
 
Feb 2007
Posts: 102
iTrader: (0)
Liked 1 Times on 1 Posts


How much to ship the chiller? Zip is 14885..

 


Closed Thread
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pennsylvania 20+ gallon complete system cbraun77s For Sale 18 03-09-2013 05:49 PM
7 BBL used complete brewing system wanted fabriciovegag Want to Buy 1 01-23-2013 09:13 PM
Complete 4 tap, 6 keg system (Bethlehem, PA) kyleslattery For Sale 7 08-27-2012 05:32 PM
Complete system for sale RonRock For Sale 8 07-07-2009 02:36 AM
Complete keg system ? Frost Bottling/Kegging 1 09-12-2008 01:09 AM


Forum Jump