perlick slow - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > perlick slow

Reply
 
Thread Tools
Old 05-03-2013, 12:04 PM   #1
LouBrew13
Recipes 
 
Nov 2011
Posts: 365
Liked 22 Times on 18 Posts



Is it my co2 tank being low or should I raise my serving pressure? Because I switched from krome faucets to perlick and the beer just pisses out now. First batch through is a milk stout. Almost has a nitro effect.

 
Reply With Quote
Old 05-03-2013, 12:10 PM   #2
glugglug
Recipes 
 
Nov 2008
Longmont, Colorado
Posts: 192
Liked 23 Times on 20 Posts


What's your pressure now? You mention nitro effect, is this beer on nitro? I currently have my first nitro beer going, and using a Perlick tap. My understanding, and what I'm doing, is setting the nitro pressure at 30psi. I'm no expert on nitro, so I could be wrong. But you gotta use more pressure.

 
Reply With Quote
Old 05-03-2013, 01:25 PM   #3
LouBrew13
Recipes 
 
Nov 2011
Posts: 365
Liked 22 Times on 18 Posts


It's not on nitro. But the flow is slow and the head is full of nice tight small bubbles which looked great. Perhaps it's that this stout is thicker in body than previous beers and flows slower? It's my first stout on draft and my first beer since switching to new faucets.

 
Reply With Quote
Old 05-06-2013, 03:54 AM   #4
glugglug
Recipes 
 
Nov 2008
Longmont, Colorado
Posts: 192
Liked 23 Times on 20 Posts


I don't think that's it. It should flow the same as other beers. I'm wondering if your line is clogged somewhere, or perhaps the tap.

 
Reply With Quote
Old 05-06-2013, 05:19 PM   #5
atom
Recipes 
 
Oct 2011
York, Pennsylvania
Posts: 1,153
Liked 294 Times on 173 Posts


Quote:
Originally Posted by glugglug View Post
What's your pressure now? You mention nitro effect, is this beer on nitro? I currently have my first nitro beer going, and using a Perlick tap. My understanding, and what I'm doing, is setting the nitro pressure at 30psi. I'm no expert on nitro, so I could be wrong. But you gotta use more pressure.
you need a stout faucet with a restrictor to push 30psi...

OP...sounds like a clog, perhaps in the diptube?

Brewerforlife Likes This 
Reply With Quote
Old 05-06-2013, 09:10 PM   #6
LouBrew13
Recipes 
 
Nov 2011
Posts: 365
Liked 22 Times on 18 Posts


I'm still enjoying it just more slowly than the others. I don't feel like tearing it apart and reassembling while full of beer. But I will check when empty.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
WTT One used Perlick 425ss for an Perlick 525ss suorangeguy For Sale 0 07-02-2012 03:29 AM
Perlick Kegerator, with 3 faucet Perlick tower, and PERL 525 faucets. Hefanatic For Sale 12 06-13-2012 05:20 PM
slow, slow start for yeast Fighting_sin Fermentation & Yeast 9 01-21-2010 07:02 AM


Forum Jump