Propane + RIMS build (long term) - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Propane + RIMS build (long term)

Reply
 
Thread Tools
Old 04-29-2013, 02:22 AM   #1
GrantH
Recipes 
 
Oct 2010
Hattiesburg, MS, Mississippi
Posts: 326
Liked 7 Times on 6 Posts



I am starting to design/purchase parts for a RIMS build using propane for the HLT and BK with a 5500 element in the HEX. I know how the systems work, but this is a lesson in planning so far. I thought I knew how to plumb the system but I have all but tied my brain in a knot trying to figure it out.

Anyways, I am planning it in sketchup. I linked my diagram so far down below in hopes that anyone could help me with the plumbing. I may have some help coming from the brewhardware guys but want any and all help I can get.

As of now I have kegs figured out and my pumps are in hand (Chuggers). Everything else is to come shortly. I hope.


RIMS 2 by HopticalIllusionist, on Flickr

 
Reply With Quote
Old 04-29-2013, 10:03 AM   #2
bucfanmike
HBT_LIFETIMESUPPORTER.png
 
bucfanmike's Avatar
Recipes 
 
Apr 2010
Duluth
Posts: 1,025
Liked 27 Times on 24 Posts


right off the bat, I notice you will need to rotate that pump head at least 90 degs. To avoid air pockets, the outlet either needs to face to the right or straight up.
__________________
Mike in Duluth

Currently on Tap
1. Hefeweizen
2. BM Centennial Blonde
3. LHMS Clone

Pipeline
Next on Tap-Denny Conn Rye IPA
Kegged and aging Ed Worts Apfelwine, Denny Conn BVIP
Fermenters -

 
Reply With Quote
Old 04-29-2013, 11:19 AM   #3
GrantH
Recipes 
 
Oct 2010
Hattiesburg, MS, Mississippi
Posts: 326
Liked 7 Times on 6 Posts


I thought the center inlet pumps got rid of that issue, but it makes sense looking at it. I've looked at every RIMS system I can find and while I understand the plumbing, the valves are what keep me guessing. I need to just sit down and draw a hand drawn diagram rather than fooling with 3d. Maybe I can get that done today. Updates to come!

 
Reply With Quote
Old 05-01-2013, 01:35 AM   #4
GrantH
Recipes 
 
Oct 2010
Hattiesburg, MS, Mississippi
Posts: 326
Liked 7 Times on 6 Posts


I talked with one of the guys from brewershardware about plumbing and routing of things and we have come up with a better way to do things. I am going to use 3-way SS valves, the two pumps, and a vertical hex. Even though the MT drains into a horizontal tube, it should be a non-issue as the water level will be way high and it should gravity feed to the pump.


rims by HopticalIllusionist, on Flickr


Edit: This is obviously not complete and still needs the BK plumbing and such.

 
Reply With Quote
Old 05-01-2013, 02:06 AM   #5
stonebrewer
Invented the IPL
HBT_LIFETIMESUPPORTER.png
 
stonebrewer's Avatar
Recipes 
 
Mar 2012
rockville, md
Posts: 1,529
Liked 185 Times on 160 Posts


I was told when I bought my plate chiller a few years back that the outlets need to face up for maximum efficiency. Can you point me to a link for three way stainless steel valves? Sounds interesting. I am thinking about putting in a RIMS in the near future, but was planning on using existing parts...might change my mind though.

 
Reply With Quote
Old 05-01-2013, 02:11 AM   #6
Pratzie
HBT_LIFETIMESUPPORTER.png
 
Pratzie's Avatar
Recipes 
 
Sep 2012
Northeastern Pennsylvania
Posts: 1,550
Liked 158 Times on 112 Posts


interesting. keep posting pics, im interested how it turns out
__________________
Bottled: Nothing :(
Kegged: Nothing :(
Primary: Empty
Secondary: Empty
Aging:
On Deck: Cider

 
Reply With Quote
Old 05-01-2013, 02:17 AM   #7
GrantH
Recipes 
 
Oct 2010
Hattiesburg, MS, Mississippi
Posts: 326
Liked 7 Times on 6 Posts


Quote:
Originally Posted by stonebrewer View Post
I was told when I bought my plate chiller a few years back that the outlets need to face up for maximum efficiency. Can you point me to a link for three way stainless steel valves? Sounds interesting. I am thinking about putting in a RIMS in the near future, but was planning on using existing parts...might change my mind though.
Amazon has quite a few options. Not sure the exact ones I am going with, but they are ~40 a piece. You may also be correct about the chiller, I will research that. I still don't know the exact one I want but I hope to get a 40 plate. It will be easy enough to build a bracket/mount for it to mount correctly.

 
Reply With Quote
Old 05-01-2013, 01:25 PM   #8
GrantH
Recipes 
 
Oct 2010
Hattiesburg, MS, Mississippi
Posts: 326
Liked 7 Times on 6 Posts


I'm trying to figure out my RIMS system, so if anyone would be ever so kind to help me figure out what I need that would be awesome. I'm looking for 1.5 Tri -> 1/2" barb in some fashion I believe. I am using braided silicone hoses, so I need to run the 1/2" hosing to the inlet and outlet of my rims tube (1.5 tube). Do I need to go 1.5 Tri -> 1/2 NPT -> 1/2 barb?

I think I can manage the plumbing fittings outside of this. I just don't know the availability for that style fitting.

My main issue is the electrical and what to run. I know I need a SSR compatible PID from Auber, but which temp sensor and such should I use? I've read a little about the RTD deal, but know nothing of it. The RIMS for Dummies thread is out of hand now, it's far too long to read through and decipher the conversations.

 
Reply With Quote
Old 05-01-2013, 01:30 PM   #9
Genuine
Recipes 
 
Nov 2011
Putnam, CT
Posts: 464
Liked 78 Times on 60 Posts


Looks good so far man! I can't wait to see how things progress
__________________
Petey Photography CT Beer Trail

 
Reply With Quote
Old 05-01-2013, 05:05 PM   #10
adman
HBT_SUPPORTER.png
Recipes 
 
Jan 2011
Chicago, IL
Posts: 94
Liked 1 Times on 1 Posts


Quote:
Originally Posted by GrantH View Post
I'm trying to figure out my RIMS system, so if anyone would be ever so kind to help me figure out what I need that would be awesome. I'm looking for 1.5 Tri -> 1/2" barb in some fashion I believe. I am using braided silicone hoses, so I need to run the 1/2" hosing to the inlet and outlet of my rims tube (1.5 tube). Do I need to go 1.5 Tri -> 1/2 NPT -> 1/2 barb?
http://www.brewershardware.com/1.5-T...Hose-Barb.html

You can also do what you described (with 1/2 NPT) if you want greater flexibility. But hose barb-triclamp fittings are available.

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Propane, Single tier, direct fired RIMS build ColoHox Brew Stands 33 05-06-2013 10:21 PM
Assisting RIMS with propane. pentiumone133 Electric Brewing 3 01-19-2013 06:09 AM
Long Term Brewery Build tmyoung Brew Stands 5 08-08-2012 11:43 AM
Best for long term storage? BrutalBrew Beginners Beer Brewing Forum 5 06-30-2012 04:55 PM
Oak aging- short term vs. long term grammatron General Beer Discussion 4 03-01-2010 05:32 PM


Forum Jump