Barb sizes? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Barb sizes?

Thread Tools
Old 04-28-2013, 02:49 PM   #1
Feb 2013
Posts: 75
Liked 2 Times on 2 Posts

Hey everyone, so I am gathering up the material I need to build a keezer. I ordered my regulator, distributor and quick disconnects. My question is, the barbs don't seem to be the same size. Everything is supposed to be 5/16". I assumed the quick disconnects were 1/4" and contacted the seller and they quickly shipped me replacements but they are the same size as the first pair. Could my distributor be the wrong size? And I can I tell for sure?

Click image for larger version

Name:	image-1942117067.jpg
Views:	40
Size:	36.3 KB
ID:	118574

Reply With Quote
Old 04-28-2013, 03:28 PM   #2
Nov 2010
Mahopac, NY
Posts: 2,221
Liked 61 Times on 52 Posts

Some Co2 regulators have 3/8 barbs, commonly used for commercial sanke kegs
Originally Posted by Bobby_M View Post
Simcoe smells like 10 cats pissing on a pine tree. It's awesome.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
tubing for 1/2 barb oasisbliss All Grain & Partial Mash Brewing 7 11-10-2012 01:44 AM
Barb or no barb? Lamarkid7 Kettles, Mash Tuns & Hot Liquor Tanks 7 06-09-2010 01:11 AM
Incompatibility in barb sizes - need advice carnevoodoo Equipment/Sanitation 4 05-28-2009 06:47 PM
Barb or Flare? fifelee Bottling/Kegging 9 06-29-2007 06:00 PM
Regulator barb is 5/16 and gas-in connector barb is 1/4 ??? Kaiser Bottling/Kegging 1 02-22-2006 02:14 PM

Forum Jump