Worth it to make a yeast starter from yeast cake 12 hrs before brewing? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > Worth it to make a yeast starter from yeast cake 12 hrs before brewing?

Reply
 
Thread Tools
Old 04-26-2013, 08:54 PM   #1
McKraut
 
McKraut's Avatar
Recipes 
 
May 2011
Dallas, TX
Posts: 35
Liked 1 Times on 1 Posts



I'm about to attempt my first time doing all grain with a pretty standard american pale ale, and also have a pretty standard IPA that is ready to be bottled (from primary, no secondary). I wanted to try reusing the yeast for the first time also, so I was thinking about transferring to bottling bucket tonight to bottle, and then do the washing process for the yeast cake (it's a WLP001 yeast), where I end up with a slurry that is somewhat trub-free... and then make a starter tonight, and shoot for starting the brew tomorrow mid-day.

My question, then, is should I even bother with a yeast starter being this close to brewing, or will the existing yeast be fine as it is after semi-washing it? Or, is it just better to use the yeast unwashed? I did dry hop with an ounce of Palisades, which isn't a hop I'll be using in this pale ale (will be using mostly cascades)... so not sure if that's a big consideration or not.

Also, is it a big deal if you go from a slightly higher gravity beer to a lower one when reusing yeast? The difference won't be too crazy, but it will definitely be downward, and I always read you're supposed to go upward.

Worst case scenario, should I just use a packet of Danstar Nottingham that I have in the fridge?

 
Reply With Quote
Old 04-27-2013, 01:44 AM   #2
logdrum
Recipes 
 
Aug 2010
North Olmsted, Ohio
Posts: 912
Liked 58 Times on 52 Posts


If your racking off the yeast cake plan on pitching relatively soon thereafter , no need to make a starter. I would rinse w/ sterilized/sanitized water, decant to a couple of mason jars & pitch the appropriate ml as per Mr Malty. Now, in regards to pitching down, it's generally not recommended, however many many homebrewers do it with no catastrophic results. Probably depends more on the fermentation conditions of the yeast than strictly gravity.

 
Reply With Quote
Old 04-27-2013, 03:51 AM   #3
BigFloyd
 
BigFloyd's Avatar
Recipes 
 
Dec 2012
Tyler, Texas
Posts: 5,268
Liked 759 Times on 652 Posts


The reason for a starter is to increase the number of yeast cells to the appropriate level. With the cake from the IPA that's just finished, you've got an overabundance of cells.

Do you expect much hop trub in that IPA? If not, after racking it into the bottling bucket, I'd simply pour off the remaining IPA, harvest about 1/3 of that cake into a sanitized jar and pitch it into the new batch.
__________________
Good Temp Control -----> Happy Yeast ------> Tasty Brew

 
Reply With Quote
Old 04-27-2013, 04:34 AM   #4
dabeers
Recipes 
 
Feb 2010
Louisville, KY
Posts: 66
Liked 2 Times on 2 Posts


Agree with logdrum and bigfloyd. Wash yeast or use straight portion of slurry, either should be fine without doing a starter. Even though it will be a longer day, I would recommend bottling and brewing/pitching same day. For me all the extra time you spend cleaning makes it more efficient to do both the same day.

 
Reply With Quote
Old 04-30-2013, 05:11 PM   #5
McKraut
 
McKraut's Avatar
Recipes 
 
May 2011
Dallas, TX
Posts: 35
Liked 1 Times on 1 Posts


Thanks for all the advice. i ended up not making any starter as suggested, and just went with the washing process Friday night. I boiled my mason jars, and used some of the boiled water once cooled as my washing solution. I ended up harvesting probably 3/4 of the yeast... I'm not sure how many mL that ended up being that I pitched, but it was quite a bit, so I'm confident I overpitched by a good amount. So, as expected, fermentation had taken off very quickly by the next morning.

I guess I will just see what happens at this point and how everything tastes in the end. I may even use the yeast again, either for another pale ale or IPA?

My biggest problem (I think) with my first attempt at all grain was that I didn't properly account for loss from hot break/trub... so I ended up about .75 gallon short, though my OG was pretty close, I'm guessing because my efficiency wasn't very good? I thought about adding some water at the end, but wanted to just roll with it, and see what the final product tastes and looks like as a result, and learn from it.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stepped Up Yeast Starter (Yeast Cake Size) ishredthecello Fermentation & Yeast 0 01-27-2013 04:14 AM
Yeast Starter: Pitch the whole shebang, or just the yeast cake? Tad_Porter Fermentation & Yeast 3 11-29-2010 03:57 AM
Making yeast starter from secondary yeast cake? Madvillain General Techniques 4 05-01-2010 02:54 AM
Pitch onto 5 day old yeast cake or make starter? KCBrewer Beginners Beer Brewing Forum 10 04-13-2010 04:03 AM
I want to make my first yeast starter for brewing this weekend... Opinions please JimE Fermentation & Yeast 2 02-24-2010 05:43 PM


Forum Jump