Bottling after tapping? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Bottling after tapping?

Reply
 
Thread Tools
Old 04-21-2013, 08:59 PM   #1
capparella
Recipes 
 
Jun 2011
oviedo, fl
Posts: 11


I was wondering if there are any secret tricks to bottling a beer to have it last if you have already tapped a keg of home brew? I tried it once before by just bottling it straight from the tap, but it went flat within 2 days.

 
Reply With Quote
Old 05-03-2013, 10:36 PM   #2
capparella
Recipes 
 
Jun 2011
oviedo, fl
Posts: 11

Any hints? Anyone try this one?

 
Reply With Quote
Old 05-05-2013, 10:13 PM   #3
BansheeRider
HBT_SUPPORTER.png
 
BansheeRider's Avatar
Recipes 
 
Dec 2012
Posts: 1,515
Liked 102 Times on 93 Posts


Quote:
Originally Posted by capparella View Post
I was wondering if there are any secret tricks to bottling a beer to have it last if you have already tapped a keg of home brew? I tried it once before by just bottling it straight from the tap, but it went flat within 2 days.
There is a sticky at the top of this forum that shows how to do this...http://www.homebrewtalk.com/f35/we-n...eer-gun-24678/
Not sure why you started two threads on this subject. Anyways, the sticky above is a proven method.
__________________
Good judgement comes from experience, experience comes from bad judgement.

Hammy71 Likes This 
Reply With Quote
Old 05-05-2013, 10:28 PM   #4
chris0879
Recipes 
 
Aug 2012
Quincy, Ma
Posts: 31
Liked 2 Times on 2 Posts


I use my picnic tap and plastic tubing from lowes. I brought my tap with me to find the right size tubing. You fit the tubing right inside the opening of the picnic tap.

Shut off the co2 to your keg and release the pressure release on the keg.
Turn the psi down to 1-2psi.
Make sure the plastic tubing its the bottom of the bottle and let it flow I let the beer pour over a little bit and cap immediately.


I have had beer last 6 months. Usually drink before I can see how long it lasts.


Let me know if you have any questions. Total cost is under $20. The plastic tubing was like $0.23 a ft.

Cheers.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tapping a FreshkegRR cd4955a Bottling/Kegging 4 12-31-2012 06:06 PM
tapping 1st keg basement-brewer Beginners Beer Brewing Forum 1 01-19-2012 05:50 AM
Tapping my First Keg,Have a Few Questions RLinNH Bottling/Kegging 19 03-11-2008 12:29 AM
Tapping my first keg... Bulls Beers Bottling/Kegging 5 01-09-2008 07:52 AM
Tapping a keg.... Dude General Chit Chat 5 04-22-2005 04:38 PM


Forum Jump