Beginner Welder Mistake?? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Beginner Welder Mistake??

Reply
 
Thread Tools
Old 03-31-2013, 03:57 AM   #1
dobbinsda
Recipes 
 
Dec 2011
Posts: 14
Liked 1 Times on 1 Posts



I am in the midst of building my dream brewery--Brutus clone. I am pretty green at welding and steel work, but things have been going well so far.

I am using 2x2 mild tube steel. 1/8 inch in thickness. Everything is fully welded using a Hobart MIG 140 with 75% Argon/25% CO2 shield.

Today I started grinding the welds on the top flush so not to scratch my pots. I guess I got caught up in the moment (or one too many brews) but I ended up grinding and polishing every weld on the stand. It took me a long time but it looks awesome. Now I am sitting here pondering if I did the wrong thing. I am wondering if I shouldn't have ground down most of the welds and that I may have left the joints too weak. I searched Google and HBT for info on weld strength, but everything I find doesn't seem to apply.

Everything seems sturdy but I don't want to find out otherwise midbrew.

So I am hoping for another DIYer to shed some light on issue. Should I go back and reweld some of the underneath areas or I am just being paranoid here and just enjoy the smooth bliss?

 
Reply With Quote
Old 03-31-2013, 03:59 AM   #2
stevo4361
Recipes 
 
Aug 2011
Basin, WY
Posts: 341
Liked 51 Times on 42 Posts


I'm not a certified welder but been welding on the farm and all that for awhile, you're fine man.

 
Reply With Quote
Old 03-31-2013, 03:25 PM   #3
dobbinsda
Recipes 
 
Dec 2011
Posts: 14
Liked 1 Times on 1 Posts


Thanks for your input

 
Reply With Quote
Old 04-01-2013, 05:12 AM   #4
chuckjaxfl
Recipes 
 
Feb 2010
Jacksonville, FL
Posts: 327
Liked 22 Times on 14 Posts


How do you feel the 140 dealt w/ 1/8 mild? I'm looking at getting a first welder, very soon. I'm drawn to the 140 to make use of the 115 outlet (and save a couple hundred bucks!), but fear I'll regret it and wish I'd gone w/ the 180.

 
Reply With Quote
Old 04-01-2013, 05:23 AM   #5
kosmokramer
Recipes 
 
Aug 2011
SoCal
Posts: 1,326
Liked 33 Times on 28 Posts


dont worry about it, i have the same welder and did the same thing in my build... by grinding most of the weld off you definitely weaken the joint but as long as you had it hot enough and got good penetrations you should be okay for this application.
__________________
My eherms build: http://www.homebrewtalk.com/f170/rea...course-325623/

Help support my new LHBShttp://www.facebook.com/socalhomebrewing

 
Reply With Quote
Old 04-01-2013, 10:57 AM   #6
sigmund
Recipes 
 
Jan 2008
Posts: 417
Liked 4 Times on 4 Posts


Did you bevel your tubing before welding and make sure all your metal was clean? The fact that you have to ask raises concerns. To be safer, you may want to cut apart one of your welds and see what it looks like before you assume that you are good to go. Having a few hundred pounds on there and having 8 gallons of boiling water, or more, dump because you had a bunch of welds fail might put a damper on the weekend........
__________________
Quote:
BTW, those can not be drunk in multiple count if the day’s plan includes finish carpentry work or power tools.
- Schoonie

Burkey Street Brewery

Gixxer Likes This 
Reply With Quote
Old 04-01-2013, 12:15 PM   #7
JDGator
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Feb 2013
Powassan, Ontario
Posts: 730
Liked 62 Times on 49 Posts


Quote:
Originally Posted by sigmund View Post
Did you bevel your tubing before welding and make sure all your metal was clean? The fact that you have to ask raises concerns. To be safer, you may want to cut apart one of your welds and see what it looks like before you assume that you are good to go. Having a few hundred pounds on there and having 8 gallons of boiling water, or more, dump because you had a bunch of welds fail might put a damper on the weekend........
if the welded joints were beveled it should be ok. if you just butt the joints then you may have an issue with them cracking. you likely have less then 1/16" weld now.

I would be worried about it cracking!!

 
Reply With Quote
Old 04-01-2013, 12:23 PM   #8
Durhamite
Recipes 
 
Feb 2011
Durham, NC
Posts: 193
Liked 20 Times on 13 Posts


Weld together some pieces of scrap using the EXACT technique/welder settings you used for the rest of the stand. Grind down the weld just as you did the others, then do a stress test.

 
Reply With Quote
Old 04-01-2013, 05:32 PM   #9
socalboomer
HBT_SUPPORTER.png
Recipes 
 
Mar 2011
Riverside, CA
Posts: 239
Liked 4 Times on 3 Posts


With .120 steel, as ling as you have good, full penetration, you should be fine.

That's the big qualifier. You don't need to bevel .120 (1/8") ... Your weld should penetrate that far.

Do what Durham said...but use flat instead of your square. Use the same thickness and do a 1" bead. Stick it in a vice and bend it back and forth until either the weld breaks or the metal fails. This is what we do when we take the AWS cert tests for light gauge welding. The metal should fail BEFORE the weld breaks. Yes, it's hard to break it... But you can do it and it will show the quality of your weld...

And it's far better to find out how good/bad you can weld on THAT than on something holding 15x8lbs=120lbs x3 kettles =360lbs of scalding water...
__________________
On Tap (Nitro): Chocolate Palomino
On Tap 1: Blueberry Blonde.On Tap 2: Imperial Red.On Tap 3: Moonless Midnight Hillbilly RIS
In Secondary: empty for now
In Primary: empty for now
Next up: Gold Dust Pale, Boxer Strings Nut Brown

 
Reply With Quote
Old 04-01-2013, 06:35 PM   #10
Funkatollah
Recipes 
 
Aug 2009
York, PA
Posts: 60

You could try hitting the weakest looking joint with a 5lb hammer. If it cracks, the welds are suspect. If not, you have a reason to gain confidence in your work.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stupid beginner mistake..... nodough Beginners Beer Brewing Forum 12 05-06-2013 05:15 PM
1 mistake 2 mistake 3 mistake.... FAIL silver02ws6 General Beer Discussion 1 08-30-2011 11:57 PM
Beginner Mistake nsean Beginners Beer Brewing Forum 3 11-16-2010 12:04 PM
which welder to buy? strat_thru_marshall DIY Projects 3 08-16-2010 03:24 AM
Which welder to get? Grimsawyer DIY Projects 33 02-23-2008 08:42 AM


Forum Jump