Using a hydrometer seems to be a difficult and it give me a headache.. - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Using a hydrometer seems to be a difficult and it give me a headache..

Reply
 
Thread Tools
Old 03-26-2013, 11:42 AM   #1
Elysium
Recipes 
 
Feb 2013
Madrid, Spain
Posts: 1,187
Liked 22 Times on 22 Posts



I have been trying to find a way to get the proper/exact readings for my batches,but it seems to be really difficult to correctly take readings at home.

My main problem is the temperature. The moment I take a little bit of the batch, it obviously starts warming up (since the temperature of the batch is slightly colder than room temperature.....I keep it in the closet).
This means that the reading will change as the temperature affects the sugar in the small amount of liquid I take out of the batch. My idea is to put the thermometer and the hydrometer together in the liquid and jot down both the reading and the temperature, but is there like an excel chart to help me with the connection between the temperature and the reading?

Anyway...here is what has just happened....we have bottled a batch (IPA made from extract)...I took the the reading before the bottling and the room temperature was 21ºC (70F) and the reading was 1.015. 1.015 is just okay for bottling, but the batch fermented for 3 weeks at 18-19ºC (65-66F). No way that it wasnt ready for bottling.
As the little amount of liquid warmed up under room temperature that 1.015 reading started to drop to 1.014-1.012.

Any ideas how to improve my techniques? My lack of knowledge is annoying the hell out of me.

 
Reply With Quote
Old 03-26-2013, 12:12 PM   #2
chungking
Recipes 
 
Jun 2012
Posts: 310
Liked 10 Times on 9 Posts


It's not rocket science. A few degrees and gravity points here and there shouldn't be a concern, as long as the gravity reading is steady after a few days. No point in stressing about exact readings, its all going to the same place!

 
Reply With Quote
Old 03-26-2013, 12:19 PM   #3
Fennis
 
Fennis's Avatar
Recipes 
 
Apr 2011
Readfield, Maine
Posts: 385
Liked 26 Times on 19 Posts


Well you can always adjust for temperature, there are many websites that do this for you and I am sure many here can give you the exact calculation. The best way to determine if your beer is ready is to take readings over a few days. Once your readings are stable, then you are safe to move on to bottling. I wouldn't get too concerned over a .001 - .003 change in your gravity. Of course its going to change slightly as the beer changes temperature, so unless you have a way to have your ambient temperature in your room be the exact same temperature as your beer, its going to fluctuate slightly.

Remember, we are doing this out of our homes, not a temperature controlled cleanroom in a perfect environment. I think your techniques are just fine. I think you may be focusing on something that you have little control over. If your gravity was changing day to day or over 1.020, then maybe you would need to change something, but it seems to me that you have nothing to worry about. Relax, bottle that beer, and enjoy it in the weeks to come.

 
Reply With Quote
Old 03-26-2013, 12:35 PM   #4
cfonnes
Recipes 
 
Jun 2010
Utah
Posts: 929
Liked 64 Times on 49 Posts


The sample was at 70F and it started to warm up at room temperature?

How hot is your room?

 
Reply With Quote
Old 03-26-2013, 12:41 PM   #5
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,415
Liked 7842 Times on 5495 Posts


It doesn't sound like a temperature issue really.

It sounds like you have some co2 bubbles in the sample. Next time, stir the sample to degas it, and then gently put the hydrometer in it when the foam goes away. Spin the hydrometer a bit, and make sure it's off the side of the test jar. Then take the reading at eye level.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 03-26-2013, 12:57 PM   #6
Elysium
Recipes 
 
Feb 2013
Madrid, Spain
Posts: 1,187
Liked 22 Times on 22 Posts


Quote:
Originally Posted by cfonnes View Post
The sample was at 70F and it started to warm up at room temperature?

How hot is your room?
Closet (thus the batch temperature) is between 64-66F and room is at 70-71F.

 
Reply With Quote
Old 03-26-2013, 12:59 PM   #7
Elysium
Recipes 
 
Feb 2013
Madrid, Spain
Posts: 1,187
Liked 22 Times on 22 Posts


Quote:
Originally Posted by Yooper View Post
It doesn't sound like a temperature issue really.

It sounds like you have some co2 bubbles in the sample. Next time, stir the sample to degas it, and then gently put the hydrometer in it when the foam goes away. Spin the hydrometer a bit, and make sure it's off the side of the test jar. Then take the reading at eye level.
Ok, basically I gotta worry less about temperature and care more about the sample being degassed and containing no foam on the surface?

 
Reply With Quote
Old 03-26-2013, 01:12 PM   #8
unionrdr
Heavyweight homebrewing author & shootist of air
HBT_LIFETIMESUPPORTER.png
 
unionrdr's Avatar
Recipes 
 
Feb 2011
Sheffield, Ohio
Posts: 38,964
Liked 3690 Times on 3170 Posts


Quote:
Originally Posted by Elysium View Post
Ok, basically I gotta worry less about temperature and care more about the sample being degassed and containing no foam on the surface?
Yes. Here's a claculator for temp correcting hydrometer readings; http://www.brewheads.com/gravcorrect.php
__________________
NEW books on amazon/Kindle! Check it out now...
Home Brewing- https://www.amazon.com/dp/B00PBAP6JO
Distopian Sci-Fi- https://www.amazon.com/dp/B00NTA0L6G
New! John Henry- https://www.amazon.com/dp/B01GBV3UXU

 
Reply With Quote
Old 03-26-2013, 01:23 PM   #9
eric19312
HBT_SUPPORTER.png
 
eric19312's Avatar
Recipes 
 
Dec 2012
, NY
Posts: 1,040
Liked 122 Times on 99 Posts


Here is a calculator

http://www.brewersfriend.com/hydrometer-temp/

I do what you do..thermometer in sample jar with hydrometer. Always get temp at same time as hydrometer reading.


A mor elegant solution is one of these

http://morebeer.com/products/deluxe-...ion-scale.html

But I think I am going to get one of these instead and stick with my thermometer technique. Call it the over 40 hydrometer...

http://www.keystonehomebrew.com/shop...990-1-020.html


I use a refractometer for mash, boil, and OG measurements but need the hydrometer for FG. The techniques above are all helpful. You may not be as obsessive about FG as me, I have an engineering background and like to measure things...

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Could you give me a 0% interest rate or better yet just give me the house?? jgln Drunken Ramblings and Mindless Mumbling 22 07-22-2013 01:39 PM
Does CO2 give you a headache? pascott6 Bottling/Kegging 11 11-03-2011 02:54 PM
Sounds crazy but does home brew give you a headache? jasno999 General Beer Discussion 19 02-18-2008 12:53 PM
Brewing in Va. sure is difficult tbeazlie General Techniques 7 01-01-2008 03:52 PM


Forum Jump