Temp Controller WH7016e - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Fermenters > Temp Controller WH7016e

Reply
 
Thread Tools
Old 03-19-2013, 12:19 AM   #1
escobar090
Recipes 
 
Dec 2012
Posts: 13


Hi everyone, just got this temperature controller from China and im trying to figure out how to wire it. Its pretty much like the regular SCT1000 (same design and size but differs in its functionallity)

I just realized its only one sided (heating or colling, correct me if im wrong) but i think its not that much of a problem, considering i can just heat in the winter and cool in the summer.

The thing is, im having trouble in the wiring process, here is the diagram but im not an electric guy, can any of you give me a heads up?, please, id really appreciate it.


Thanks in advance.

 
Reply With Quote
Old 03-19-2013, 12:29 AM   #2
billfloyd806
Recipes 
 
Mar 2013
Posts: 12
Liked 2 Times on 2 Posts


Look over the photo and see if that will get you going. I show no heating and cooling connected to a single outlet. Just remember attach the hot wires to the copper colored screws and use a pair of snips to cut the jumper out between the two copper screws. This will allow one side to hot and the other not, if you leave it in there both heating and cooling will be active in either mode.

Click image for larger version

Name:	image-1867337053.jpg
Views:	333
Size:	90.2 KB
ID:	108806

 
Reply With Quote
Old 03-19-2013, 12:30 AM   #3
billfloyd806
Recipes 
 
Mar 2013
Posts: 12
Liked 2 Times on 2 Posts


I guess I should have also asked what are you hooking it up too? Kegerator cooler?

 
Reply With Quote
Old 03-19-2013, 12:31 AM   #4
billfloyd806
Recipes 
 
Mar 2013
Posts: 12
Liked 2 Times on 2 Posts


I'm showing a 220vac model is yours is 110vac just wire the same way.

 
Reply With Quote
Old 03-19-2013, 02:28 AM   #5
day_trippr
Recipes 
 
May 2011
Stow, MA
Posts: 18,379
Liked 3233 Times on 2414 Posts


Wrong WillHi model. The OP's is single stage with nine terminals.

Here's how to wire the 7016e, assuming a 110V model:

From the input power cord:
- black (hot) wire goes to terminals 1 and 4
- white (neutral) wire goes to terminal 5 and the white wire on the output power cord (or the bright screws on a socket)
- green (safety ground) connects to the green wire on the output power cord (or the grounding screw on a socket)

Then, terminal 2 connects to the black (hot) wire on the output power cord (or the brass screws on a socket).

Finally, the temperature probe connects to terminals 8 & 9.

Terminals 3, 6 & 7 are generally left unused...

Cheers!

 
Reply With Quote
Old 03-19-2013, 05:26 PM   #6
escobar090
Recipes 
 
Dec 2012
Posts: 13

Thank you all, i want to hook up and old fridge and in my country we work with 220v, what would change knowing this?

 
Reply With Quote
Old 03-19-2013, 06:22 PM   #7
day_trippr
Recipes 
 
May 2011
Stow, MA
Posts: 18,379
Liked 3233 Times on 2414 Posts


If you have the model that supports 220vac for the power input (described as "Working voltage" in the manual, to an external reference, presumably the ordering page), then actually nothing in my description would change. The connections are identical, only the context differs...

Cheers!

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bucket water heater hooked to a digital temp. controller to control mash temp? castillo83 All Grain & Partial Mash Brewing 2 01-30-2013 05:42 PM
Ogden ETR-9090 PID controller set up as temp controller BoundForBeer For Sale 1 10-06-2012 03:06 PM
WTB: temp controller stc-1000 aquarium eBay controller JRems For Sale 10 05-16-2012 12:14 PM
Attic Fan Temp Controller = Inexpensive Fermentation Controller???? Beernip General Techniques 5 06-16-2009 04:30 PM


Forum Jump