making a Keezer - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > making a Keezer

Thread Tools
Old 03-18-2013, 01:26 PM   #1
Mar 2013
Posts: 1

I'm researching how to make a kegerator vs. a keezer and cannot find an example of a keezer that has a tower tap mounted on the top. Everything is mounted thru a collar and I was wondering why? I don't need the extra height inside since I will only have a couple of small kegs.

Reply With Quote
Old 03-18-2013, 01:31 PM   #2
Jan 2013
Posts: 1,224
Liked 65 Times on 58 Posts

Here is one, do a search on youtube, you will find tons of videos.

Go Spartans!!

Reply With Quote
Old 03-28-2013, 04:00 AM   #3
Feb 2012
Posts: 4

I have a keezer with a collar for two reasons. One being cutting into the lid and voiding any warranty if any. The other being if you have the freezer sitting against a wall, when opening the lid, you can engage the faucets and make a bit of a mess. The collar will allow you to attach things like gas manifolds, temp controllers etc. Most towers I've see also need to be cooled with some sort if fan assembly blowing cold air up into them. No need for that with shanks and faucets.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
New to brewing, Jumping right in. - Making a Keezer mjpeisher Kegerators & Keezers 7 12-15-2012 10:22 PM
keezer making funny noises ifpo238 Bottling/Kegging 12 11-27-2012 12:30 AM
Another keezer in the making! okgasdude Kegerators & Keezers 61 01-12-2011 07:36 PM
I'm getting dangerously close to making a keezer post GRHunter Kegerators & Keezers 5 05-20-2010 04:44 PM
making space for keezer bionicbrew Kegerators & Keezers 16 03-11-2010 06:19 PM

Forum Jump