Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > Star San leaked into my brew
Reply
 
Thread Tools
Old 03-17-2013, 10:56 PM   #1
fozzie14
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2013
Posts: 57
Liked 1 Times on 1 Posts
Likes Given: 9

Default Star San leaked into my brew

Made the mistake of trying to top off the airlock (using Star San) while it was installed. After a few times squirting the Star San, but it not reaching the fill line on the airlock, I realized that the Star San was going down the airlock into my batch. Lesson learned: Remove airlock and top off, then reinstall. About a couple of tablespoons worth of Star San went into my brew. How will this affect the fermentation and the beer? It's a 5 gallon True Brew Nut Brown Ale, OG:1.051, with Saflager S-23 Dry Lager Yeast 11.5 Grams plus 6 Grams of the Munton's Yeast that came with the kit. Used the lager yeast because the room where it will be fermenting is at a constant 50 degrees F this time of year.


fozzie14 is offline
 
Reply With Quote
Old 03-17-2013, 11:01 PM   #2
louderthanu
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 35
Liked 2 Times on 2 Posts
Likes Given: 28

Default

Lol! I just did this as well as long as it was diluted I think you'll be fine, I left a mixture of water and starsan at the bottom of my keg and the first few pulls were watery but then it was fine tastes great no off flavors.


louderthanu is offline
fozzie14 Likes This 
Reply With Quote
Old 03-17-2013, 11:04 PM   #3
WoodlandBrew
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
WoodlandBrew's Avatar
Recipes 
 
Join Date: Oct 2012
Location: Malden, MA
Posts: 2,188
Liked 225 Times on 198 Posts
Likes Given: 59

Default

I wouldn't sweat a couple of tablespoons. Too much more than that it might taste a little sour. It would take quite a bit to inhibit the yeast.
__________________
The 2nd edition is now available: Brewing Engineering
Woodland Brewing Research Blog Applied Science for Better Beer.
WoodlandBrew is offline
fozzie14 Likes This 
Reply With Quote
Old 03-18-2013, 01:00 AM   #4
winvarin
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
winvarin's Avatar
Recipes 
 
Join Date: Apr 2009
Location: Edmond, OK
Posts: 1,133
Liked 54 Times on 49 Posts
Likes Given: 2

Default

I use Star San in my blow off rig (tube with a 32 ounce cup of sanitizer); and in my air locks once the most vigorous ferment is complete.

Last fall I had a blow off setup with 16 ounces of SS attached to an extremely light beer. I cold crashed it a little too vigorously and wound up with a little more than half of the SS getting sucked back into the fermented beer. Not only did I not get an infection, I was not able to taste anything sour or "off" about the beer.

If your sanitation was otherwise OK, your beer should be good to go.
winvarin is offline
fozzie14 Likes This 
Reply With Quote
Old 03-18-2013, 01:59 AM   #5
fozzie14
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2013
Posts: 57
Liked 1 Times on 1 Posts
Likes Given: 9

Default How about more than one airlock?

Any reason people don't install more than one airlock (in a plastic fermenter lid), to prevent yeast clogging a single airlock? To make a blowoff setup, do I just insert one end of a hose in the airlock hole, and put the other end in a container of Star San at a lower level than the fermenter? Why is this better than an airlock? Can't the blowoff hose get clogged as well?
fozzie14 is offline
 
Reply With Quote
Old 03-18-2013, 02:21 PM   #6
winvarin
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
winvarin's Avatar
Recipes 
 
Join Date: Apr 2009
Location: Edmond, OK
Posts: 1,133
Liked 54 Times on 49 Posts
Likes Given: 2

Default

Mine is not usually an issue of stuff clogging as much as an issue of yeast/trub pushing though the lock. For me at least, a half full large cup or small pitcher with star San makes a good overflow receptacle. Then I just keep an eye on things. When the heaviest part of fermentation is done, I swap out the overflow container with fresh star San or if it has really died back, a standard airlock
winvarin is offline
 
Reply With Quote
Old 03-18-2013, 04:22 PM   #7
william_shakes_beer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2010
Location: Maryland
Posts: 2,259
Liked 170 Times on 136 Posts
Likes Given: 2

Default

Two airlocks would be clogged as easily as one. The issue is the diameter of the portion of the airlock that is inserted into the fermenter. My 3 piece airlock has a small X at the tip that is the narrow point. If there is hops and break material in the krausen it would block 1,2, or 30 airlocks. The blowoff has a larger opening and is less likely to get clogged. But, yes the blowoff can get clogged. Just less likely.


william_shakes_beer is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
CO2 Leaked - Keg FensterBos Beginners Beer Brewing Forum 16 08-19-2014 10:11 PM
CO2 hose leaked mikev5553u Bottling/Kegging 2 09-25-2012 01:03 AM
Keg leaked dlaramie08 Bottling/Kegging 2 09-09-2012 05:22 PM
Leaked sanitizer into brew busket!!?? boilline78 Beginners Beer Brewing Forum 13 11-21-2010 03:36 PM
Oh no! Keg leaked Co2 Newbeerguy Bottling/Kegging 19 12-19-2009 01:51 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS